Water and Wastewater Testing Supplies
Aqua Solutions DPD Free Chlorine Pwd Pil(1000/pack) FOR 10ML SAMPLE
DPD Free Chlorine Pwd Pil(1000/pack) FOR 10ML SAMPLE
Aqua Solutions DPD Free Chlorine Pwd Pil(100/pack) FOR 10ML SAMPLE
DPD Free Chlorine Pwd Pil(100/pack) FOR 10ML SAMPLE
Aqua Solutions Nitrogen Standard 1,000 ppm Solution,(1ml = 1mg N) Certified (1L)
Nitrogen Standard 1,000 ppm Solution,(1ml = 1mg N) Certified (1L)
Thomas Scientific Sludge Judge, 15 ft.
The Sludge Judge is designed to take accurate readings of settleable solids, 5% or less, in a variety of liquids, to any depth. It is ideal for sewage treatment plants, chemical plants, and food processing facilities - anywhere that accurate sample levels of settleable solids in noncaustic materials are needed. The unit holds approximately 3 oz. per foot (89 ml per 0.31 m). The Sludge Judge comes in 5 ft. (1.53 m) sections of 3/4" (1.90 cm) plastic pipe with screw-type connectors. The top section includes a nylon rope for raising and lowering the sampler. Individual sections can be combined as required to achieve the length needed. Do not use in liquids over 165°F (74°C). Sludge Judge is not autoclavable. A convenient cotton canvas carrying case that holds four sections, a cleaning brush, cleaning rod, and cotton strips are available. To use: Slowly lower the Sludge Judge to the bottom of the tank. The float valve opens, allowing materials to flow in. W
Hach Company Phosphorus reactive Vial Test, ULR (0.01 - 0.50 mg/L PO₄-P), 20 Tests
Phosphorous HPT chemistry and your Hach spectrophotometer are engineered to simplify water analysis for accurate results, everytime. For determination of very low phosphorous (reactive) concentrations, e.g. in wastewater effluents, surface water or drinking water samples by the Phosphormolybdenum Blue Method. Convenient handling using 50 mm rectangular vials.20 ULR Phosphorus reactive vials per box.
Hach Company CUVETTE 50MM RECT PMMA 10PCS
50mm rectangular cuvettes come 10pc per EA. 7 mL volume, semi-micro, with caps. Dimensions (H x W x D): 50 mm x 19.5 mm x 60 mm.
Grainger Cut-Off TKN 4 KW10 Uncoate 10 pcs.
The 170ET8 is a 3M Scotch-Brite High Performance Industrial Hand Pad. It is a 6 inch by 9 inch hand pad made of high-quality nylon fibers in an open textured nonwoven construction. This pad is designed for industrial cleaning, finishing and deburring applications. It effectively removes rust, scale, paint, dirt and burrs from metal, plastic and fiberglass surfaces. The pad has an open coat abrasive that cuts fast without scratching. It is durable, resists loading and has high scrubbing power. The 3M Scotch-Brite High Performance Industrial Hand Pad 170ET8 provides versatile cleaning and finishing for industrial applications.
Grainger Cut-Off TKN 2 CR9025 CVD C 10 pcs.
The 170ET1 is a 3M Scotch-Brite General Purpose Hand Pad, 6" x 9", from Grainger. It features an open web construction that cleans effectively without scratching. The pad is made of high-quality fibers and resin that resist shredding and fraying. It can be used for light scrubbing and cleaning of surfaces. This durable hand pad has many applications including prep work, paint removal, cleaning, and surface conditioning. It effectively removes grease, dirt, grime, and more from surfaces. The 6" x 9" size fits comfortably in the hand.
Grainger Cut-Off TKN 16 KW10 Uncoat 10 pcs.
The Grainger 170ER7 is a Dayton 1/3 HP Electric Motor that runs on 115V AC power at 1725 RPM. It is a single phase, open drip proof motor with a 48 frame size, features sleeve bearings, and is rated for continuous duty applications. The motor dimensions are 6-1/2" diameter x 8-7/16" long, it weighs 15 lbs, and has a 1/2" diameter shaft with a 1/4" keyway. This electric motor can be used for various industrial, commercial, and residential applications requiring 1/3 horsepower.
Cole-Parmer Horiba NA-11 LAQUAtwin Na-11 Pocket Tester, Range 23 to 2300 ppm
This pocket-sized IP67- rated waterproof sensor allows you to take simple, fast, and accurate measurements. Built in sensor lets you to take measurements in two ways: you can immerse the meter tip into sample, or you can place a few drops (0.3 mL) directly on the sensor. Results are instantly displayed on the 4-digit LCD. Automatic calibration function recognizes standards, and is user selectable for either one- or two-point calibrations.