Evaporator Accessories
Shimadzu Scientific Instruments DRAIN VALVE ASSMBLY LC-20ADXR
NC2236929 DRAIN VALVE ASSMBLY LC-20ADXR
Electron Microscopy Sciences Tip Check
The Tipcheck is used for examining the shaft of the tip probe and for determining tip breakage. In AFM, an independent means of assessing the influence of the probe tip on the image is desirable since a broken or misshapen probe tip results in inaccurate rendering of samples. If the tip damage goes undetected, the true topographical nature of your samples may inadvertently go unnoticed.
A simple, convenient means to prescreen all of one's AFM tips is TipCheck. TipCheck exploits reverse imaging to provide a fast and simple way to assess new and used tips without the need for SEM inspection and permits qualitative comparisons between tips. The microstructure of the TipCheck film is ideal for the detection of tip morphology in the vicinity of the tip apex. The AFM images shown here were obtained by imaging a TipCheck surface with (left) a broken tip and (right) a reasonably good tip.
Electron Microscopy Sciences Gold Sputter Coater Target, 60 mm diameter, 0.1 mm thick
Targets have a standard thickness of 0.1 mm (100 micron) or use on most sputtering units and are available mounted or unmounted. Made from high purity metals. When ordering, please state make and model of the sputtering unit to ensure proper fit.
Diameter: 60 mm
Thickness: 0.1 mm
Ace Glass, Inc. PTFE connecting adapter, 15mm Ace-Thred to 22-400 GPI vial, FETFE O-ring
PTFE connecting adapter, 15mm Ace-Thred to 22-400 GPI vial, FETFE O-ring
Chemglass Life Sciences 15 Well Evaporator/Concentrator Manifold, Replaceable Needles
15 Well Evaporator/Concentrator Manifold, Replaceable Needles. Manifold is a low cost solution for the concentration of product in 96, 48 or 24 well blocks. Delivers equal amounts of gas to each well to gently speed solvent evaporation. Needles are constructed of stainless steel. The 15 well units have removable/replaceable needles. Manifold is constructed of polypropylene and the base is coated aluminum. Equipped with an adjustable flow meter for controlling gas flow into the manifold. Inlet is a 1/8” barbed fitting.Note: Blocks are not included and must be purchased separately.
Electron Microscopy Sciences EMS Tungsten Boat B-3
Thickness of tungsten foil is 0.25 mm (0.010"). Overall length is 101.6mm x 19.05mm (4" x 3⁄4"), trough: 39.1mm(L) x 6.35mm(W) x 3.3mm Deep, 0.5ml