Stirrer Accessories
Ace Glass, Inc. Paddle stir shaft, stainless, 3 blade, 2.5in(63.5mm) diameter on 5/16(7.9mm) x 8.75in(222mm) shaft, high efficiency paddle for viscous liquids & semi-solids
Paddle stir shaft, stainless, 3 blade, 2.5in(63.5mm) diameter on 5/16(7.9mm) x 8.75in(222mm) shaft, high efficiency paddle for viscous liquids & semi-solids
Chemglass Life Sciences Stirring Shaft, 19mm, Chem-Stir, 12 to 20L Flasks, 730mm OAL, Complete with PTFE Nut and Bolt
Stirring Shaft, 19mm, Chem-Stir, 12L-22L Flasks, 730mm OAL, Complete with PTFE Nut and Bolt. A 19mm OD precision ground stirrer shaft with our patented** Chem-Stir blade attachment system. Shaft (C) has been manufactured with a ring at the lower end to permit attachment of the blade (B) with a PTFE nut (D) and bolt (A). Shaft is supplied complete with PTFE nut and bolt set. The top end of the stirrer shaft is reduced to 1/2" (12.7mm) to fit into a CG-2046-03 universal adapter while the unground length varies to accommodate different flask capacities. PLEASE NOTE: STIRRER BLADES MUST BE PURCHASED SEPARATELY.THESE SHAFTS ARE NOT TO BE USED WITH ANY TYPE OF PTFE BEARING. FOR POLISHED SHAFTS USED WITH PTFE BEARINGS SEE CG-2087.PLEASE NOTE: 19MM SHAFTS HAVE A REDUCED DIAMETER TOP SECTION THAT IS 1/2"OD, PLEASE KEEP THIS IN MIND WHEN SELECTING THE PROPER SIZE COUPLING.
Chemglass Life Sciences 31mm Rotary Bearing Taper Lock, Ferrule, Nylon
31mm Rotary Bearing Taper Lock, Ferrule, Nylon
Sigma Aldrich Fine Chemicals Biosciences 2mag MIXcontrol eco contro1EA
Control unit for small to medium volumes and the connection of one stirring dirve MIXdrive 10W stirring power speed range from 100 to 1 200 rpm SoftStart for reliable catching/centering and safe accelerating of the stirring bar.Interfaces 0-10 volts 4-20 mA RS232 USB Ethernet.
Chemglass Life Sciences Stirrer Bearing, Macro, Glass, with tooled Lubricant Cup, for 10mm Shaft, 34/45 Inner Joint
Stirrer Bearing, Macro, Glass, with tooled Lubricant Cup, for 10mm Shaft, 34/45 Inner Joint. Similar to CG-2070 but with a tooled lubricant cup at the top of the bearing to hold an increased amount of lubricant. NOTE: Not for use with CG-2078 or CG-2079 polished stirrer shafts.
Chemglass Life Sciences Stirrer Bearing, Macro, Glass, with tooled Lubricant Cup, for 10mm Shaft, 45/50 Inner Joint
Stirrer Bearing, Macro, Glass, with tooled Lubricant Cup, for 10mm Shaft, 45/50 Inner Joint. Similar to CG-2070 but with a tooled lubricant cup at the top of the bearing to hold an increased amount of lubricant. NOTE: Not for use with CG-2078 or CG-2079 polished stirrer shafts.
Chemglass Life Sciences Stirrer Bearing, Macro, Jacketed, Glass, for 10mm Shaft, 45/50 Inner Joint
Stirrer Bearing, Macro, Jacketed, Glass, for 10mm Shaft, 45/50 Inner Joint. Similar to CG-2070, but water jacketed to control bearing temperature. For use in moderate vacuum with a CG-2074 or CG-2075 ground 10mm stirrer shaft. NOTE: Not for use with CG-2078 or CG-2079 polished stirrer shafts.
Chemglass Life Sciences Nylon Loosening Nut, 45/50, 19mm
Nylon Loosening Nut, 45/50, 19mm. Replacement part for CG2077H series of PTFE stirrer bearings.
Glas Col LLC Homogenizer
Stirrer motor homogenizer and speed controller for gentle dispersion of tissue and cellsAnalog unit with a variable speed of 333 to 4,000rpm 120V and an electronic motor controller that maintains speed regardless of changes in viscosity1/4hp motor drive unit has a geared output shaft for higher torque applications and lower speeds, and a direct-drive output shaft for lower torque applications and higher speedsElectronic motor controller provides smooth rotation and repeatability while reducing motor temperature and noiseReversing switch on controller allows motor shaft to rotate the pestle clockwise or counterclockwise during homogenization