Stirrer Accessories
Chemglass Life Sciences 19mm PTFE Gasket
19mm PTFE Gasket. PTFE gasket is 0.015" thick with an opening to fit Chemglass stirrer shafts. Gasket is placed below the CG-2048 Safety collar to prevent wear as a result of the collar rotating against the stirrer bearing. Also useful as a dust cover. SOLD 12/PKG.
Chemglass Life Sciences 12mm Upper Female Motor Adapter (Green)
12mm Upper Female Motor Adapter (Green). Tru-Stirrer Shaft Coupling Replacement Component.
Electron Microscopy Sciences Pro-Craft 1/8 Hp Flex Shaft Machine, 110 V
A versatile hang-up flexible shaft machine. Available either 1/10 or 1/8 HP ball bearing motor, variable speed 0 - 18 RPM. Complete kit comes with a hand piece, 39" (1 m) Flexible shaft, variable speed foot pedal, and a bracket for hanging. Lifetime warranty on motor under normal use.
Chemglass Life Sciences Stirring Shaft, 10mm, Button Style, for 100mL to 5000mL Flasks, 455mm OAL
Stirring Shaft, 10mm, Button Style, for 100mL to 5000mL Flasks, 455mm OAL. A 10mm precision ground stirrer shaft to fit CG-2070 through CG-2072 10mm bearings. Side button for attachment of CG-2080 or CG-2081 PTFE stirrer blades.PLEASE NOTE: THESE SHAFTS ARE NOT TO BE USED WITH ANY TYPE OF PTFE BEARING. FOR POLISHED SHAFTS USED WITH PTFE BEARINGS SEE CG-2079.
Chemglass Life Sciences 3/8" to 5/16" Male Adapter
3/8" to 5/16" Male Adapter. Tru-Stirrer Shaft Coupling Replacement Component.
Chemglass Life Sciences Stirring Shaft, 19mm, Polished, Chem-Stir, 12 to 20L Flasks, 730mm OAL, Complete with PTFE Nut and Bolt
Stirring Shaft, 19mm, Polished, Chem-Stir, 12L-22L Flasks, 730mm OAL, Complete with PTFE Nut and Bolt. A 19mm OD precision ground and polished stirrer shaft with our patented Chem-Stir blade attachment system. Shaft (C) has been manufactured with a ring at the lower end to permit attachment of the blade (B) with a PTFE nut (D) and bolt (A). Shaft is supplied complete with PTFE nut and bolt set. For use with PTFE bearings such as the CG-2086. Polished shaft will not cause abrasion to the sealing surfaces of the PTFE bearing, thereby allowing a vacuum tight seal. Uses the same PTFE nut and bolt blade attachment method as the CG-2084 ground shaft.PLEASE NOTE: STIRRER BLADES MUST BE PURCHASED SEPARATELY.THESE SHAFTS ARE NOT TO BE USED WITH ANY TYPE OF GLASS BEARING. FOR GROUND SHAFTS USED WITH GLASS BEARINGS SEE CG-2084.ALSO NOTE: 19MM SHAFTS HAVE A REDUCED DIAMETER TOP SECTION THAT IS 1/2"OD, PLEASE KEEP THIS IN MIND WHEN SELECTING THE PROPER SIZE COUPLING.
Chemglass Life Sciences 3/4" Upper Female Motor Adapter (Black)
3/4" Upper Female Motor Adapter (Black). Tru-Stirrer Shaft Coupling Replacement Component.
Chemglass Life Sciences Glass Baffle Only for use in 30L & 50L (Short): Overall Length: 34", Baffle Width x Depth (mm): 20 x 30, Lower Style: Open
Glass Baffle Only for use in 30L & 50L (Short): Overall Length: 34", Baffle Width x Depth (mm): 20 x 30, Lower Style: Open.
Chemglass Life Sciences Stirring Shaft, 19mm, Chem-Stir, 12 to 20L Flasks, 730mm OAL, Complete with PTFE Nut and Bolt
Stirring Shaft, 19mm, Chem-Stir, 12L-22L Flasks, 730mm OAL, Complete with PTFE Nut and Bolt. A 19mm OD precision ground stirrer shaft with our patented** Chem-Stir blade attachment system. Shaft (C) has been manufactured with a ring at the lower end to permit attachment of the blade (B) with a PTFE nut (D) and bolt (A). Shaft is supplied complete with PTFE nut and bolt set. The top end of the stirrer shaft is reduced to 1/2" (12.7mm) to fit into a CG-2046-03 universal adapter while the unground length varies to accommodate different flask capacities. PLEASE NOTE: STIRRER BLADES MUST BE PURCHASED SEPARATELY.THESE SHAFTS ARE NOT TO BE USED WITH ANY TYPE OF PTFE BEARING. FOR POLISHED SHAFTS USED WITH PTFE BEARINGS SEE CG-2087.PLEASE NOTE: 19MM SHAFTS HAVE A REDUCED DIAMETER TOP SECTION THAT IS 1/2"OD, PLEASE KEEP THIS IN MIND WHEN SELECTING THE PROPER SIZE COUPLING.
Chemglass Life Sciences 19mm PTFE Flake Retaining Cup
19mm PTFE Flake Retaining Cup. Cup is designed to catch all flaking that occurs with PTFE stirrer bearings. Made entirely of PTFE, the complete item consists of a compression fitting, deep perforated PTFE cup and a 50 micron porosity PTFE filter disc.
Chemglass Life Sciences 10ft Extension Cord, Type "K" (Yellow), Standard to Mini Plug
10ft Extension Cord, Type "K" (Yellow), Standard to Mini Plug. Coiled extension cords to connect thermocouples to instrumentation such as temperature monitors, controllers and data loggers. Cords are 10ft long and made of 26-gauge multistrand wire with PVC insulation. All cords have a female standard (OST) with a choice of a male standard (OST) or mini (SMP) connection.
Ace Glass, Inc. Complete 45/50 10mm bearing, straight adapter style
45/50 10mm straight-adapter style bearing includes all parts needed. Self-aligning, lubricant free PTFE Trubore bearing is designed for use with 10mm O.D. stainless steel or polished glass shafts.
Ace Glass, Inc. PTFE stir blade, 19x60mm, 10mm shafts
19x60mm PTFE stir blade for 10mm O.D. button type stir shafts.
Ace Glass, Inc. 10mm 58cm solid glass stir shaft, polished, bead type
10mm O.D. polished glass stirring shaft; bead type. Length: 58cm. Use with only ACE PTFE stirrer bearings. Shafts accept 316 SS multi-paddle or turbine agitators secured with set-screw on ground flat section.
