Stirrer Accessories
Chemglass Life Sciences Stirring Shaft, 19mm, Polished, Chem-Stir, 3 to 12L Flasks, 610mm OAL, Complete with PTFE Nut and Bolt
Stirring Shaft, 19mm, Polished, Chem-Stir, 3L-12L Flasks, 610mm OAL, Complete with PTFE Nut and Bolt. A 19mm OD precision ground and polished stirrer shaft with our patented Chem-Stir blade attachment system. Shaft (C) has been manufactured with a ring at the lower end to permit attachment of the blade (B) with a PTFE nut (D) and bolt (A). Shaft is supplied complete with PTFE nut and bolt set. For use with PTFE bearings such as the CG-2086. Polished shaft will not cause abrasion to the sealing surfaces of the PTFE bearing, thereby allowing a vacuum tight seal. Uses the same PTFE nut and bolt blade attachment method as the CG-2084 ground shaft.PLEASE NOTE: STIRRER BLADES MUST BE PURCHASED SEPARATELY.THESE SHAFTS ARE NOT TO BE USED WITH ANY TYPE OF GLASS BEARING. FOR GROUND SHAFTS USED WITH GLASS BEARINGS SEE CG-2084.ALSO NOTE: 19MM SHAFTS HAVE A REDUCED DIAMETER TOP SECTION THAT IS 1/2"OD, PLEASE KEEP THIS IN MIND WHEN SELECTING THE PROPER SIZE COUPLING.
Chemglass Life Sciences 1/2" Upper Female Motor Adapter (Aqua Marine)
1/2" Upper Female Motor Adapter (Aqua Marine). Tru-Stirrer Shaft Coupling Replacement Component.
Chemglass Life Sciences Stirring Shaft, 19mm, Chem-Stir, 3 to 12L Flasks, 610mm OAL, Complete with PTFE Nut and Bolt
Stirring Shaft, 19mm, Chem-Stir, 3L-12L Flasks, 610mm OAL, Complete with PTFE Nut and Bolt. A 19mm OD precision ground stirrer shaft with our patented** Chem-Stir blade attachment system. Shaft (C) has been manufactured with a ring at the lower end to permit attachment of the blade (B) with a PTFE nut (D) and bolt (A). Shaft is supplied complete with PTFE nut and bolt set. The top end of the stirrer shaft is reduced to 1/2" (12.7mm) to fit into a CG-2046-03 universal adapter while the unground length varies to accommodate different flask capacities. PLEASE NOTE: STIRRER BLADES MUST BE PURCHASED SEPARATELY.THESE SHAFTS ARE NOT TO BE USED WITH ANY TYPE OF PTFE BEARING. FOR POLISHED SHAFTS USED WITH PTFE BEARINGS SEE CG-2087.PLEASE NOTE: 19MM SHAFTS HAVE A REDUCED DIAMETER TOP SECTION THAT IS 1/2"OD, PLEASE KEEP THIS IN MIND WHEN SELECTING THE PROPER SIZE COUPLING.
Arrow Engineering S-316-20 Type 316 Stainless Steel 20" Propeller Shaft
All Arrow Mixing Products' stainless steel mixer shafts are 3/8" dia. & made of 316 stainless steel. These quality mixer parts have a 5/16-24 external thread for easy assembly with all of our stainless steel propellers and couplings. (Note: propeller and coupling sold separately)
Chemglass Life Sciences Stirring Shaft, 10mm, Polished, Glass Agitator, Four-Blade, 525mm OAL, for 1000mL Reactors, 67mm OD Agitator
Stirring Shaft, 10mm, Polished, Glass Agitator, Four-Blade, 525mm OAL, for 1000mL Reactors, 67mm OD Agitator. Shaft is precision ground and polished to fit our CG-2076 and CG-2077 10mm PTFE bearings. Designed to be used with cylindrical type reactors. The straight glass blades are spaced 90° apart and angled 15°. PLEASE NOTE: STIRRER SHAFTS ARE DESIGNED FOR COUNTER-CLOCKWISE ROTATION.
HEPATOCHEM 8 X 4 ml vials photochemistry holder for PhotoRedOx Box, Duo, and TC
8 X 4 ml vials photochemistry holder for PhotoRedOx Box™ Single HCK1006-01-016, PhotoRedOx Box™ Duo HCK1006-01-023, and PhotoRedOx Box™ TC HCK1006-01-025
HEPATOCHEM EvoluChem PhotoRedOx Box™ photoreactor
The EvoluChem PhotoRedOx Box™ is the photochemistry photoreactor choice for the chemist who seeks to standardize laboratory photochemical setups economically. A flexible design allows interchangeable LEDs from 365 nm to 808 nm and a wide variety of vials.
V&P Scientific Inc MAGNETIC RACK, 8 Conical Microcentrifuge Tubes, 50mL Volume,
MAGNETIC BEAD SEPARATION RACK, 8 Conical Microcentrifuge Tubes, 50mL Volume, 1 Sided Bead Pellet Location, High Position, 48MGO, NdFeB Magnet, 36mm Center Spacing, 29mm Hole Diameter, Polycarbonate
V&P Scientific Inc DISPENSER, DROP, 96 Well Format, Loads VP 711 Series Stir Elements
DISPENSER, DROP, 96 Well Format, Loads VP 711 Series Stir Elements, Adjustable for Microplate Alignment