Stirrer Accessories
Med Vet International Cortical Self-Tapping Screws, stainless steel, 2.4mm x 10mm, J1073A, Each
Many fractures in feline and small canine patients are too small for the 2.0mm DCP and the 2.7mm CDP is too large.The difference between these plates is enormous compared to the difference between 2.7 and 3.5 CDPs. The AMI (resistance to bending) of the 2.7 CDP is 20 times stiffer than the 2.0 DCP. The AMI of the 2.4 DCP is 10 times that of the 2.0 DCP.The solution is a 2.4 series of plates and screws. The plates in both size and strength are midway between 2.0 and 2.7 DCPs. The range and specifications are shown below. The standard 1.5mm hex screwdriver (used for 1.5 and 2.0 screws) is required. The pilot drill is 1.8mm and dedicated instrumentation such as load/neutral guides are also available.
Bellco Glass, Inc. Round Bottom Marine Impeller,15L
MADE IN THE USA. Blade dimension: 4" od Marine prop – Right-HandedShaft oal:14 1/2"Paddles and impeller assemblies for cell cultureConstructed of 316l electropolished stainless steelReduces shear in delicate cell cultureMarine impeller includes 1/2" shaft and impeller bladeOmni and z-z paddles are one piece welded, 1/4" shaft
Bellco Glass, Inc. MicroCarrier Impeller Assembly , 15/36L
Micro-Carrier ImpellerAssemblyPromote optimal growth of suspension andmicro-carrier cultures. Impeller height adjuststhrough compression fitting in cap. Indentedbottom up to 1L prevents accumulation ofmicro-carrier beads under impeller. Impeller assembly for micro-carrier spinner flasks. Consist of magnet holder, silicone plug, magnet, and ptfe paddle. MADE IN THE USA. Impeller size: 15-36l Paddle dimensions: 3"x 10"
Chemglass Life Sciences SST Pitch Blade Impeller, 36L VSA, 8-3/4" W x 3" H Blade
Our SS pitch blade folding impeller assemblies are designed to provide optimum agitation forVertical Side Arm (VSA) vessels.These impellers will improve uplift mixing and increase mass transfer rates while minimizing shear to cultures.They can be used withcap adapter and Dura Drive Overhead Motor.The impellers are made from 316 SS and supplied with a dust shield as well as a locking ring to secure the paddle in a horizontal position once inserted into the flask.
Quality Lab Accessories Intrinsic Dissolution Apparatus, 316 SS Construction, Compatible With Distek Baths, SET/1 each
The Intrinsic Dissolution Apparatus Paddle Over Stationary Disk Set by Quality Lab Accessories offers precise and reproducible testing for intrinsic dissolution rates, essential for scientific research and pharmaceutical quality control. Constructed from durable 316 stainless steel, it ensures reliability and compatibility with Distek Baths, providing a comprehensive solution for dissolution studies with all necessary components included.
Ace Glass, Inc. PTFE agitator, (4) 178mm anchor style blades, fits 28mmdrilled shafts. Replacement nut & bolt: 8091-134
AGITATOR PTFE 28MM 178MM BLADE
Grainger Paddle Gasket 3 In PTFE w/304SS White
The Grainger 16T712 Paddle Gasket PTFE is a polytetrafluoroethylene (PTFE) gasket with a paddle shape. It has an inside diameter of 2", an outside diameter of 2-3/4", and a thickness of 1/16". The operating temperature range is -450°F to 500°F. This gasket is made from virgin PTFE and is designed for use in pharmaceutical, chemical, food processing, and other sanitary process applications where resistance to a wide range of chemicals is required. The paddle shape provides excellent sealing and allows for easy installation and removal. This is an FDA-compliant gasket made in the USA.
Chemglass Life Sciences Stirrer Blade, PTFE, Banana Shape, Perforated, 19mm, Heavy Duty, for 1000mL Flasks, 34/45 minimum joint clearance
Stirrer Blade, PTFE, Banana Shape, Perforated, 19mm, Heavy Duty, for 1000mL Flasks, 34/45 minimum joint clearance. Blade is shaped to resemble the contour of a round bottom flask. Blades are perforated. Made of 3/16" PTFE to fit 19mm OD stirrer shafts. Minimum joint size listed is the size required to allow passage of the blade.
Microsolv Technology Corporation Paddles for sealing Film or Mats in the U-2D Micro-Sample Management System. 5/PK.
Complete application of Sealing Films or Mats by pressing down on the Film or Mats with this Paddle. Assure that a secure uniform seal around all wells and inserts are complete by a gentle burnishing action. Use with the U-2D Brand Micro-Sample Management System or with other 96 Well Plates. The paddles fit within the rim of raised-well plates.
Bellco Glass, Inc. LH Pitch Blade Impeller 2in,3L
Stainless steal pitch blade impeller with left hand oriented blades 2’OD. Assemble one or more impellers into 3L drive shaft for mammalian cell culture. 316L SSTElectropolish Finish Ra 32. For 3L systems. With SST Set screw. For 1/2" Shafts. MADE IN THE USA
Arrow Engineering S-316-30 Type 316 Stainless Steel 30" Propeller Shaft
All Arrow Mixing Products' stainless steel mixer shafts are 3/8" dia. & made of 316 stainless steel. These quality mixer parts have a 5/16-24 external thread for easy assembly with all of our stainless steel propellers and couplings. (Note: propeller and coupling sold separately)
Chemglass Life Sciences Optional 30mm Stirrer Shaft, Reactor Size: 75L, Fits Support Frame: CG-1968-F-24, Overall Length: 50.3"
30mm Stirrer Shaft, Reactor Size: 75L, Fits Support Frame: CG-1968-F-24, Overall Length: 50.3". Precision ground and polished stirrer shaft for use with Chemglass process reactors. Designed to utilize CG-2095 and CG-2096 PTFE agitators. Lower portion of stirrer shaft is sandblasted and has a 3/8¿ wide flat. PLEASE NOTE: CG-2097-75 IS MADE FROM HEAVY WALL TUBING AND HAS INDENTS FOR AGITATOR POSITIONING. INDENTS ARE SPACED EVERY 10¿ FROM THE BOTTOM AGITATOR.REPLACEMENT STIRRER SHAFTS ARE FOR USE WITH MECHANICAL SEAL STIR BEARING ON LISTED SUPPORT FRAME.