Electron Microscopy Supplies
Electron Microscopy Sciences Formvar/Carbon Film 3-4 nm/20-30 nm thick on Thin Bar Square 200 mesh Copper Grid
A formvar coated grid, stabilized with evaporated carbon film. This type of coating is excellent for specimen support, especially for ultra thin sections. Coated grids are optically checked followed by batch testing in the electron microscope. Packed in grid storage box. NOTE: All film is laid on the shiny side of the grid. Formvar is 5 to 6 nm thick with a 3 to 4 nm carbon coating.
Grid: Copper
Electron Microscopy Sciences Formvar/Carbon Film 15-20 nm/1 nm thick on Single 1500 µm hole Copper Grid
A formvar coated grid, stabilized with evaporated carbon film. This type of coating is excellent for specimen support, especially for ultra thin sections. Coated grids are optically checked followed by batch testing in the electron microscope. Packed in grid storage box. NOTE: All film is laid on the shiny side of the grid. Formvar is 15 to 20 nm thick with a 1 nm carbon coating.
Grid: Copper
Electron Microscopy Sciences Formvar/Carbon Film 25-50 nm/20-30 nm thick on Hexagonal 300 mesh Copper Grid
A formvar coated grid, stabilized with evaporated carbon film. This type of coating is excellent for specimen support, especially for ultra thin sections. Coated grids are optically checked followed by batch testing in the electron microscope. Packed in grid storage box. NOTE: All film is laid on the shiny side of the grid. Formvar is 25 to 50 nm thick with a 20 to 30 nm carbon coating.
Grid: Copper
Electron Microscopy Sciences Formvar/Carbon Film 10 nm/3-4 nm thick on Hexagonal 300 mesh Gold Grid
A formvar coated grid, stabilized with evaporated carbon film. This type of coating is excellent for specimen support, especially for ultra thin sections. Coated grids are optically checked followed by batch testing in the electron microscope. Packed in grid storage box. NOTE: All film is laid on the shiny side of the grid. Formvar is approximately 10 nm thick with 3 to 4 nm of carbon.
Grid: Gold
Electron Microscopy Sciences EMS Equipment Stage 6" Stub Holder
These specimen stages are all easy-change, drop-in style (no screws), and are height adjustable. A 6" stub holder to accept up to 27 1/8 pin stubs. Compatible with EMS300TT, EMS300RT, and EMS300TD.
Electron Microscopy Sciences EMS Equipment Stage 50 mm
These specimen stages are all easy-change, drop-in style (no screws), and are height adjustable. Standard stage with six stub positions for 15 mm or 6.5 mm or 1/8" pin stubs (same as #3330, 6401, 6552). Compatible with all EMS series.
Electron Microscopy Sciences EMS Equipment Stage 8 Place Stub
These specimen stages are all easy-change, drop-in style (no screws), and are height adjustable. 8 places for 25 or 30mm Polished embedded samples. Includes a polished Brass Tally. Compatible with all EMS series.
Electron Microscopy Sciences Quantifoil Holey Carbon Film S 7/2 on Copper 400 mesh Grid
QUANTIFOIL is a perforated support foil with pre-defined hole size, shape and arrangement. It has advantages in electron microscopy (EM) or low-energy electron point source (LEEPS) microscopy when compared with conventional holey film.
QUANTIFOIL with square holes and relatively narrow bars can be used in EM to support a thin carbon film, which by itself is too fragile to span a grid square. Alternatively, this holey film can directly support an object that is larger than the holes.
Leica Biosystems Active Carbon Filter 14048858136
Active Carbon Filter 14048858136 is an activated carbon cartridge supplied by Leica Biosystems for use in compatible laboratory staining and tissue-processing instruments. The cartridge helps control solvent odors and capture volatile compounds produced during staining workflows, and is sold as a replaceable consumable.
- Contains high-grade activated carbon.
- Adsorbs organic and inorganic vapors and solvents.
- Reduces instrument odors and emissions.
- Replaceable cartridge designed for easy installation.
- Solid, non-flammable material stable under normal conditions.
Electron Microscopy Sciences Beryllium Substrate Planchet, 1 cm x 0.25 mm
These planchets are prepared from high purity beryllium (min. 98.5%) by electro-fusion to provide vacuum tight (~1x10-9atm-cm3/sec) and +/-10% dimensional tolerances.
Size: 1 cm x 0.25 mm
Electron Microscopy Sciences Carbon Support Film 5-6 nm thick on Square 300 mesh Copper Grid
A thin film of pure carbon. All of our coated grids are optically checked followed by batch testing in the EM. Packed in grid storage box. NOTE: All of our film is laid on the shiny side of the grid. Standard thickness is 5-6 nm.
Grid: Copper
Ted Pella Inc AFM SPECIMEN DISCS, 20MM 100/P
High quality magnetic stainless steel (alloy 430) discs for Atomic Force Microscopy are offered, with smooth edges and consistently flat surfaces. The AFM/STM disks are 20 gauge which is 0.0359" (0.91mm) with a range of 0.0329" to 0.0389" (0.835mm to 0.988mm) thickness.
Electron Microscopy Sciences Aurion R-Gent Silver Enhance Kit 250 ML
AURION R-Gent SE-EM is a high efficiency silver enhancement reagent for electron microscopy. It intensifies the gold particles by homogeneous deposition of metallic silver on the particle surface. The resulting electron dense signal is easily detected and is compatible with heavy metal counterstaining. The reagent has extremely delayed auto-nucleation and can be used under standard laboratory light conditions. It also has low viscosity, which is especially advantageous for pre-embedding immunogold applications.
Electron Microscopy Sciences Formvar/Carbon Film 10 nm/3-4 nm thick on Thin Bar Square 300 mesh Nickel Grid
A formvar coated grid, stabilized with evaporated carbon film. This type of coating is excellent for specimen support, especially for ultra thin sections. Coated grids are optically checked followed by batch testing in the electron microscope. Packed in grid storage box. NOTE: All film is laid on the shiny side of the grid. Formvar is approximately 10 nm thick with 3 to 4 nm of carbon.
Grid: Nickel