Electron Microscopy Embedding Media
Sigma Aldrich Fine Chemicals Biosciences RPMI-1640 medum With sodi500ML
RPMI RPMI-1640 medum With sodi500ML
Electron Microscopy Sciences Sylgard™ 184
Same as the Kwik Gard but in its original container. A two-part silicone elastomer, ideal for potting and encapsulating applications. Very low dielectric constant sealing compound used in patch clamping and many other lab applications. After cure, will withstand -55 degree to 200 degree C. Curing time for this silicone 24hrs@25 degree C, and 15 min.@150 degree C.
Sigma Aldrich Fine Chemicals Biosciences D.E.R.(TM) 332 used as embedding medium | 1675-54-3 | MFCD00080480 | 250G
D.E.R.(TM) 332 used as embedding medium | Mol Wt: 340.41 | 1675-54-3 | MFCD00080480 | 250G
Crescent Chemical Co Inc D.E.R. 736 PRACT.
D.E.R. 736 pract. Shorter chain than D.E.R. 732, lower viscosity, gives less flexible blocks. Epoxy equivalent weight 175 - 205; viscosity 0.03 - 0.06 Pas at 25 C.Used in electron microscopy. Size - 100ML Storage Conditions - +15 C TO +30 C
Sigma Aldrich Fine Chemicals Biosciences L-15 medum Leibovitz With500ML
L-15 medum Leibovitz With500ML
Sigma Aldrich Fine Chemicals Biosciences srum PlusTM II medum Sup500ML
Serum Plus(TM) II Medium Supplement contains a low level of fetal Bovine Serum (fBS) in a proprietary formulation to promote cell attachment and cell growth.
Sigma Aldrich Fine Chemicals Biosciences Minimum Essential medum E500ML
Minimum Essential medum E500ML
Sigma Aldrich Fine Chemicals Biosciences Minimum Essential medum E500ML
This is the most enriched variation of the MEM formulation offered. It contains all 21 normal amino acids some at increased concentrations. In addition it contains 5 additional vitamins.
Electron Microscopy Sciences Kwik-Gard Sylgard™ Refill 2 cartridges and 10 dispensing tips
The Kwik-Gard is specially packaged Sylgard184 silicone that offers a quicker and easier way to apply the silicone, eliminating the messy procedure of preparing the mixture before application. Its special cartridge controls the precise mixing ratio to ensure proper curing. The disposable tip mixes resin and hardener as they are dispensed. Since no air is introduced during mixing, the resin does not need degassing for most applications. The mixed silicone is applied directly to the site, reducing preparation time and material waste.
Each Kwik-Gard cartridge contains 37 mL of resin and hardener. The dispensing tip has a dead volume of 0.75 mL. Curing time for this silicone is 24hrs@25 degree C, 15 min.@150 degree C. 2 cartridges of resin/hardener, 10 tips.
Electron Microscopy Sciences PolarStat™ Polarstat Embedding Medium 4 OZ
An aqueous-based frozen section embedding medium designed to support tissue blocks in cryostat sectioning. Formulated to promote rapid freezing, enhanced sectioning and consistent results at a working temperature of -20 degree C.
Electron Microscopy Sciences Light Yellow Melamine Thermosetting Hot Mount Resin 1 KG
Light yellow melamine with mineral and glass filler, thermosetting. For soft to medium hard materials. Excellent edge retention.
Electron Microscopy Sciences Red bakelite Thermosetting Hot Mount Resin 1 KG
Red bakelite with wood filler, thermosetting. Routine examination of soft to medium hard materials. Suitable as backing.
Electron Microscopy Sciences Flat Embedding Crystal
Observing the ultrastructure of cells under an electron microscope is an important aspect of biological research, especially in the neurosciences. These embedding crystals were designed to simplify the preparation of samples and make the process more time efficient.
Sigma Aldrich Fine Chemicals Biosciences RPMI-1640 medum 10 x With500ML
RPMI RPMI-1640 medum 10 x With500ML
Sigma Aldrich Fine Chemicals Biosciences Minimum Essential medum E500ML
This is the most enriched variation of the MEM formulation offered. It contains all 21 normal amino acids some at increased concentrations. In addition it contains 5 additional vitamins.