Microscope Lamps and Accessories
Electron Microscopy Sciences Shorter Pin SEM Stub Slotted 2" Head, 6 mm Pin, Aluminum, 3.2 mm Pin diameter
SEM specimen mount with shorter pin and slotted head for use with all Zeiss/LEO SEM, FESEM & FIB systems. Made from ultra-pure aluminum with a standard lathe finish.
Head: 2"
Pin height: 6 mm
Pin diameter: 3.2 mm
Electron Microscopy Sciences PremaDisk S-EC Diamond Grinding Disc, 300 mm diameter, 6µm Particles
These new universal grinding pads for all magnetic systems will replace 200-300 SiC paper discs saving you not only preparation time, but also money. The very high stock removal rate results in fast and clean mounting. Thickness of 0.2 mm with a non-erosion backing. Only water coolant is needed. Replacement for Piano, Cameo, Galaxy, and Apex DGD.
Diameter: 300 mm
Particles: 6µm
Electron Microscopy Sciences TEM Screen Recoating Zeiss EM902 Small
For optimum viewing, fluorescent screens should be recoated regularly. Viewing screens are easily damaged by the electron beam, especially at high accelerating voltages where knock-on damage can be severe. A proprietary process where 1 to 2 micron particles of phosphor are deposited on the screen and produce the highest possible resolution.
Electron Microscopy Sciences EMS Platinum Aperture with 20 µm hole, 0.53 mm thick
Platinum apertures are easily cleaned by either an aperture flamer or over a bunsen burner in the open air. We maintain a wide variety of Platinum Drilled Apertures in stock with different configurations suiting all of your needs. Nominal hole diameter: +/- 1 micron. Disc diameter: +/- 10 microns. Disc thickness: +/- 10 microns
Size: 20 µm
O.D.: 2 mm
Thickness: 0.53 mm
Electron Microscopy Sciences PremaDisk S-SiC Grinding Disc P500, 300 mm diameter, 500µm Particles
Grinding disks made with silicon carbide grains with a 60 percent SiC concentration that is hard resin bonded. The disc can be used in wet or dry applications and have a consistent stock removal rate. They are designed with a flat grain curve that will not flatten after a few applications. They are a good alternative to SiC abrasive paper and SiC grinding foils (films), lasting 50-100 times longer.
Grinding disks come with self-adhesive backing. The discs have a thickness of 0.4 mm.
Diameter: 300 mm
Particles: 500µm
Electron Microscopy Sciences Light Pipe Scintillator JEOL U2/U3 Quartz 0¼["] Collar, 60mm
The light pipe is the connection between the scintillator and the phosphomultiplier tube (PMT). It transfers the photons produced by the scintillator for detection by the PMT. We coat the scintillator material directly on the light pipe which improves the signal. Price includes one Re-coating Certificate. Re-coating is typically needed twice per year. High voltage wire and corona ring are included.
OAL: 60mm
Electron Microscopy Sciences Indexed Grid Graticle NE10A, 19 mm, 5 x 5 mm with 0.5 mm pitch
Useful for particle counting, particularly when reference is needed between workers. Also, they are useful for area of specimen determinations. Indexed grid marked 1-10 and A-J.
Size: 19 mm
Divisions: 5 x 5 mm with 0.5 mm pitch
Surface: Chrome image
Electron Microscopy Sciences EMS 200 mesh Square Grid, Copper
Grids are 3.05 mm diameter.
Grid: Copper
Thickness: Up to 27 µm +/- 5 µm
Pitch: 125 µm
Hole: 90 µm
Bar: 35 µm
Electron Microscopy Sciences Indexed Grid Reticle RET 80, 21 mm, 10 mm x 10 mm Scale, 0.5 mm squares Divisions
High quality, precision made standard reticles are manufactured to use with our microscope eyepieces. All recticles are chrome on glass and positive polarity.
Size: 21 mm
Scale: 10 mm x 10 mm
Divisions: 0.5 mm squares
Line width: 25 µm
Electron Microscopy Sciences EMS Silicon Monoxide Film on 200 mesh Copper Grid
A thin film of pure silicone Monoxide (15 – 30 nm) is deposited directly on top of the grid. All of our coated grids are optically checked followed by batch testing in the EM. Packed in grid storage box. NOTE: All of our film is laid on the shiny side of the grid.
Grid: Copper
Electron Microscopy Sciences JEOL SEM JSM 840 Cylinder Mount 1" surface, 3/8" height, Aluminum
Cylinder specimen mounts are for use with JEOL JSM-840 scanning electron microscopes. The mounts are made from ultra-pure aluminum with a standard lathe finish.
Head: 1"
Height: 3/8"
Electron Microscopy Sciences Amray 1000/1200/1400 Pin Stub 1/2" head, Aluminum polished, 1/8" Pin diameter
Scanning electron microscope specimen mounts for AMRAY 1000/1200/1400 SEMs. Made from ultra-pure aluminum polished finish with a smooth and luster surface.
Head: 1/2"
Pin diameter: 1/8"
Electron Microscopy Sciences Gilder Thin Bar Square 200 mesh Gold Grid
Thin Bar Grids have been developed using a new technology to produce ultra-fine grids with thinner cross bars than regular grids. The result is equally firm specimen support but with 40% more open area for viewing maximum specimen surface area. 3.05 diameter, 0.8 mil thickness.
Grid: Gold
Pitch: 125 µm
Hole: 113 µm
Bar: 12 µm
: