Microscope Accessories and Replacement Parts
General accessories and parts for use with microscopes. Products include lens oil, lens cleaner, slide dispensers, microscope covers, vessel holders, light cubes, and flow cells.
Many parts of your microscope can be updated or replaced including microscope lamps, lenses, and eyepieces. Replacement lamps, light sources, and power cords can extend the working lives of your microscopy equipment. New or replacement objectives and lenses can help increase the total magnification available with your microscope.
Add greater magnification or exchange your eyepiece for one with a reticule to more easily estimate the sizes of the items being viewed.
Replace or update your mechanical stage or clamps or add cell culture vessel adapters to facilitate specimen positioning.
Condensers can also be replaced, and conversion kits are available to add phase contrast, polarization, fluorescence, or other capabilities to your current system.
Some microscopes can be adapted for use with still or video cameras. Look for cameras and adapters designed for your specific microscope brand. Film and documentation-related products may also be available to support your record-keeping.
Temporary, semi-permanent, and more long-term slide storage options include:
- Slide racks that securely hold slides during staining procedures
- Folding fiberboard or plastic slide holders with horizontal indentations that keep microscope slides in place
- Slide storage boxes with vertical dividers; made from fiberboard, plastic, and wood and available in multiple sizes
- Slide holders and mailers for transporting slides safely
- Slide storage systems and cabinets for large quantities of slides or archival storage
Electron Microscopy Sciences EMS Strip Aperture JEOL, 30-50-150 µm holes, 9.0 x 2.35 x 0.10 mm
Strip apertures made from Platinum-Iridium (95:5).
Holes: 30-50-150 µm
Dimensions: 9.0 x 2.35 x 0.10 mm
Electron Microscopy Sciences EMS Strip Aperture JEOL, 100-200-300 µm holes, 9.0 x 2.35 x 0.10 mm
Strip apertures made from Platinum-Iridium (95:5).
Holes: 100-200-300 µm
Dimensions: 9.0 x 2.35 x 0.10 mm
Electron Microscopy Sciences Immersion Cedar Wood Oil 100 ML
Refractive Index 20 degree C 1.515-1.520. Used as an immersion oil.
Electron Microscopy Sciences EMS Gold Aperture with 200 µm hole, 3 mm O.D., 0.24 mm thick
Advanced techniques of thin metal film application permits the apertures to retain a clean hole edge during prolonged beam exposure. Ultra-thin, half-micron design discourages contaminant accumulation and stabilizes astigmatic conditions to provide longer life. Conventional mechanical cleaning involving costly down-time is no longer necessary. Because the foil is ultra thin, care must be taken when handling the gold foil apertures.
Size: 200 µm
O.D.: 3 mm
Thickness: 0.24 mm
Electron Microscopy Sciences EMS Strip Aperture Hitachi, 10-10-20-70 µm holes, 41.0 x 4.0 x 0.10 mm
Strip apertures made from Platinum-Iridium (95:5).
Holes: 10-10-20-70 µm
Dimensions: 41.0 x 4.0 x 0.10 mm
Electron Microscopy Sciences EMS Strip Aperture Hitachi, 70-70-50-50m, 41.0 x 4.0 x 0.10 mm
Strip apertures made from Platinum-Iridium (95:5).
Holes: 70-70-50-50m
Dimensions: 41.0 x 4.0 x 0.10 mm
Electron Microscopy Sciences Veco Square Center Reference 100 mesh Gold Grid
Veco Grids offer superior handling characteristics. Plus, with a 0.8 mil thickness, Veco Grids are the most rigid grids available. 3.05 mm diameter.
Grid: Gold
Pitch: 250 µm
Hole: 200 µm
Bar: 50 µm
Electron Microscopy Sciences X-Checker™ Calibration Aid for SEM/EDS Standard
The X-Checker was the first and remains the only complete calibration aid for SEM/EDS Systems. Each X-Checker comes with manganese to measure full width at half max detector resolution, aluminum and copper to perform spectral calibration, and carbon to monitor calibration at the low end of the spectra for thin window detectors. You also get two grid sizes for checking the accuracy of your image analysis software and an easy test for monitoring the amount of vacuum pump oil contamination on your detector window. Comes with: manganese, aluminum and copper, carbon.
Electron Microscopy Sciences EMS Holey Carbon Film 50 µm holes on 200 mesh Copper
A thin film of carbon with round holes. All of our coated grids are optically checked followed by batch testing in the EM. Packed in grid storage box. NOTE: All of our film is laid on the shiny side of the grid.
Grid: Copper
Holes: 50 µm
Electron Microscopy Sciences S7 England Finder Slide
S7 is a glass slide 75 mm x 26 mm marked over the top surface in a way that a referenced position can be directly read relative to the locating edges. It is marked with a square grid at 1 mm intervals. Each square contains a center ring bearing reference letters and numbers, the remainder of the square is subdivided into four segments numbered 1 to 4.
Reference numbers run horizontally 1 to 75 and letters vertically A to Z (omitting I). The main locating edge is the bottom of the slide, which is used in conjunction with either the left or right vertical edge of the slide.
Using the finder the position of a field of interest is easily recorded, ite can be relocated by another person when using a England Finder on another microscope. The location of the arrows is identical for all England Finder slides. Mark a label on the left hand side of the specimen slide, indicating the orientation. A total of 100 positions can be accurately located.
THORLABS INC Adapter with External SM1 Threads and Internal C-Mount Threads, 4.1 mm Spacer
Adapter with External SM1 Threads and Internal C-Mount Threads, 4.1 mm Spacer
Ibidi USA Tubing sets. BLUE; length 15 cm, ID 0.8 mm, 10 ml reservoirsPcs./Box: 4 (individually packed)
Ready to use tubing sets for flow assays with the ibidi Pump System. Includes tubing and resvoirs to perform flow assays in combination with the ibidi Channel Slides and Fluidic Units. Product Variation: BLUE; length 15 cm, ID 0.8 mm, 10 ml reservoirsPcs./Box: 4 (individually packed)