Flow Analysis
BURKLE INC Flow indicator CheMobil, PMP, black
Flow indicators give precise visual indication of the flow velocity of liquids or gases being transported through hose connections. The flow indicator with impeller functions in both directions and in any position. The impeller (PP) starts to rotate at a flow rate about 150 ml/min (5.07 oz./min) (liquids).
Anton Paar Highly accurate air-bearing motor (minimum torque 100 nNm)For measurements in both rotation and oscillationIdeal for investigation of sample structure
MCR 73 SpecificationsBearing design: Air, fine-pored carbonMotor design: Electronically commutated (EC) permanent magnet synchronous motorDisplacement transducer: High-resolution optical encoderNormal force measurement design: n/aMin. torque (rotation): 100 nNmMin. torque (oscillation): 100 nNmMax. torque: 160 mNmTorque resolution: 5 nNmAngular deflection resolution: 8 nradMin. angular velocity: 10-8 rad/sMax. angular velocity / max. speed: 261 rad/s (2,500 rpm)Min. frequency: 10-7 HzMax. frequency: 100 HzNormal force range: n/aNormal force resolution: 0.4 mNAuto Control: YesTruStrain: n/aTruRate: n/a
World Precision Instrument 6 Replacement Modular Cables for DAM50 Bioamplifier
Design your own setup
These modular cables are each 3 feet long, and they are designed for use with your DAM50 Bioamplifier.
Anton Paar RheolabQC is a rotational rheometer combining high performance with easy operation and robust design. It supports tests from single-point checks to flow curves and yield points, enabling flexible, reliable, and efficient routine rheological measurements
SpecificationsSpeed: 0.01 1/min to 1200 1/minTorque: 0.20 mNm to 75 mNmShear stress: 0.5 Pa to 3 x 104 PaShear rate: 10-2 1/s to 6500 1/sViscosity range: (depending on the measuring system)1 mPa.s to 109 mPa.sTemperature range: -20 °C to +180 °CAngular resolution: 2 µradPhysical variables (measurement or evaluation)_Speed_Torque_Shear rate_Shear stress_Dynamic viscosity_Temperature_Time_Deformation_Compliance_Yield stress_ Flow and viscosity curve_Thixotropy_ Time and temperature test
Anton Paar Optimized for routine R&D and material formulationTorque range from 1 nNm to 215 mNmBroad range of temperature-based accessoriesQuickConnect coupling and Toolmaster featuresSuccessor to popular MCR 102e
MCR 303 SpecificationsBearing design: Air, fine-pored carbonMotor design: Electronically commutated (EC) permanent magnet synchronous motorDisplacement transducer: High-resolution optical encoderNormal force measurement design: 360° capacitive sensor, non-contacting, fully integrated in bearingWorking Modules: CMTMin. torque (rotation): 5 nNmMin. torque (oscillation): 5/1 nNmMax. torque: 215 mNmTorque resolution: 0.1 nNmAngular deflection resolution: 3 nradMin. angular velocity: 0 rad/sMax. angular velocity / max. speed: 314 rad/s (3,000 rpm)Min. frequency: 2 x 10-8 HzMax. frequency: 100 HzNormal force range: 0.001 N to 50 NNormal force resolution: 0.1 mNTruStrain: OptionalReady for DMA in tension, bending, and compression: n/a
DC Scientific Glass Inc Ubbelohde Viscometer Tube, Size 1B
Ubbelohde Viscometer Tube, Size 1B, Provided With Iso/Iec 17025:2017 Calibration Certificate
Anton Paar Automatic viscometer with Simple Fill funnel—pour and go, no pipette or syringe needed. 150% higher throughput vs. glass capillary viscometers. Results in ASTM D7042 and D445 (bias-corrected) with in-place cleaning and drying.
Test Methods: ASTM D7042, D445 bias corrected, ISO 23581, EN 16896Measuring Range:Viscosity: 0.3 mm²/s to 5,000 mm²/sTemperature: +15 °C to +100 °C (one temperature, second temperature optional)Viscosity repeatability** and reproducibility**0.1 % and 0.35 %Temperature repeatability: 0.005 °CTemperature reproducibility: 0.03 °C from +15 °C to +100 °CSample volume min. / typical: 3.5 mL / 8 mLSolvent volume min. / typical: 5 mL / 10 mLMax. sample throughput: 21 samples per hourOptional upgrades: Second temperatureIntegrate Simple Fill Filling Device