Mills
Thomas Scientific New Mini Mill Vacuum recovery system 115V 60Hz
New Mini Mill Vacuum recovery system 115V 60Hz
ER Advanced Ceramics, Inc. 784VM JAR MILL 1/3HP TE 115/60
- Durable welded steel construction
- 1/3 HP totally enclosed DC motor
- Solid-state variable speed control
- Speed range of 20 to 300 RPM
- 3 tiers for efficiency
- Jar capacity of 6 jars
- Maximum load per tier: 60 lbs
- Roll length: 13 in
- Overall dimensions: 20-1/4 in length, 12-1/8 in width, 50-1/8 in height
- Roller chain drive system
- Sealed ball bearings for smooth operation
- No-creep roll design for jar retention
- Electrically conductive neoprene rubber rollers for safety
- Metal pans under each tier to contain spillage
- Fully portable design
- Jars and media are not included
Grainger Ball End Mill Single End 10.00mm Carbide
The Ball End Mill from Ball is a high-speed steel end mill with a ball nose end for milling contoured surfaces. It has a 1/4" shank diameter, 1/2" cutting diameter, 2" overall length, and 2 flute design. The end mill features TiAlN coating for increased tool life and heat resistance. It can machine a variety of materials including steel, stainless steel, cast iron, aluminum, copper, brass, bronze, plastic, and wood. The end mill is designed for high speed machining with recommended speeds up to 21,000 RPM and feed rates up to 80 IPM. It can be used for slotting, side milling and profiling operations. The end mill provides accurate results for 3D contouring applications.
Research Products International Corp SprialPestle Grinding Beads, 50ml
Grinding Beads are ideal for quickly and efficiently homogenizing samples in micro-tubes. When used with SpiralPestle Grinder - beads allow optimum cell lysis of culture cells, small tissue samples, and other soft solids. Adding up to 0.1 ml Grinding Beads to a sample and using the SpiralPestle Grinder enhances disruption results in a 1.5 ml micro-tube.
Optional BioVortexer facilitates faster results and efficiency. Combining SpiralPestle Grinder, Beads and BioVortexer greatly increases rotational speed and mechanical dispersement of samples.
Homogenize and grind samples
Allow optimum cell lysis of tissues and microorganisms
Convenient
Fritsch Milling And Sizing Inc Movable Jaw P-1 Pl+Cl Size 2 Hardmetal Tungsten Carbide
Movable crushing jaw, hardmetal tungsten carbide for PULVERISETTE 1 premium line and classic line, Size 2
For the comminution of hard, abrasive samplesGeneral material specifications:
Material: hardmetal tungsten carbide - GC 40 - WC
Abrasion resistance: very good
Suitable for hard, abrasive samples
Grainger Cor Rad End Mill 1/8 Carb 0.0200 rad
The Micro 100 Corner Radius End Mill is a carbide end mill with a corner radius of 0.031 inches. It has a 1/4 inch shank diameter and is available in a length of 2 inches. The end mill has a TiAlN coating and 4 flutes. It is designed for general purpose milling in steels, stainless steels, cast iron, aluminum, and other non-ferrous materials. The end mill provides good chip control and tool life. It can be run at speeds up to 21,000 RPM with feed rates up to 80 IPM. The corner radius design allows for stronger cutting edges and smoother wall finishes.
Sklar Instruments Needle Holder Sklar Microscopy Surgical 1/EA
Needle Holder Sklar Microscopy Surgical 1/EA
Grainger End Mill Kyocera EM 1125 1.1250 Dia
The Kyocera 170HC2 is a 2 flute, high speed steel end mill with a 1/2" shank diameter and 1" cutting diameter. It has a TiAlN coating for increased hardness and heat resistance. The end mill has a 30 degree helix angle and can be run at speeds up to 325 SFM. It is designed for slotting, side milling and contouring in steels and cast iron. The end mill features Kyocera's KY2000 coating technology for improved wear resistance.
Fritsch Milling And Sizing Inc Grinding Bowl 80 Ml Cpl. Tungsten Carbide P-7 Pl
Grinding bowl 80 ml cpl. tungsten carbide P-7 pl with lid, seal ring and label
Grinding bowl volume: 80 ml
Useful capacity: 10 … 30 ml
Weight net: 1.580 kg
General material specification:
Material: hardmetal tungsten carbide - WC
Abrasion resistance: very good
Suitable for: hard, abrasive samples
All grinding bowls for the Planetary Micro Mill PULVERISETTE 7 premium line are delivered - as a standard – with a silicone seal ring. Due to this seal ring, the lid and grinding bowl are so tightly sealed that even grinding in suspension is possible absolutely problem-free.
When grinding in solvents or dry grinding of slightly caustic samples, we recommend our seal rings made of Viton (Article No. 84.0341.15) because they have a much higher chemical resistance.
World Precision Instrument #7 Carbide Ball Mill
This line-powered micro drill will make easy work of grinding, finishing, cutting and drilling bone, teeth and other material. The high-torque 35,000 rpm (maximum) motor is quiet and has minimal vibration which reduces wear on the motor and provides greater comfort for you. It also features a forward and reverse switch, “E Type” handpiece and handpiece holder. The handpiece has a removable nose cone that can be cleaned and sterilized. It accepts 3/32” and 2.33mm bur shanks. Unlike battery-powered drills, this unit maintains consistent power for the duration of use. The wide range of speeds allows you to control the amount of heat generation.