General Spectrometer Accessories
Glass Expansion Quartz Torch with 1.0mm Injector for Agilent7500
Quartz Torch, single-piece, 1.0 mm id injector, for petrochemical and volatile organic solvent analysis with Agilent 7500 ICP-MS. Suitable for organic applications with volatile solvents but not inert to samples containing hydrofluoric acid (HF).Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Quartz Torch High Solids with Sheath Gas for 700-ES or Vista Axial
Quartz Torch, single-piece (High Solids with Sheath Gas), 2.4 mm ID injector (2010122400). Recommended for high total dissolved solids (TDS) analysis with Agilent (Varian) axial 700-ES, Liberty and Vista Series ICP-OES. Used with auxillary gas module (AGM) 1 for control of sheath gas flow, provides better performance than the standard high solids torch. Suitable for routine analysis of high TDS up to 25% but not inert to samples containing hydrofluoric acid (HF).Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Tracey PFA44 Spray Chamber with ScrewLok & Helix CT, 44ml cyclonic, PFA. Includes UFT-16-75 UniFit Connector (1 unit) and 70-803-1439 Helix CT locking screw with seal (1 unit)
Tracey PTFE spray chamber, includes Helix CT locking screw & seal (1 pc) & UniFit with 1.6mm OD x 0.75mm ID x 700mm long tube (1 pc). Made from PTFE for HF resistance, 44mL volume. Compatible with PerkinElmer ELAN 6000,9000, DRC II, DRC-E ICP-MS.The Tracey PTFE is a HF-resistant cyclonic design with a proprietary Stediflow surface treatment that significantly improves sensitivity & precision, in addition to enhancing washout efficiency compared to other inert spray chamber designs. The interior surface can be refurbished at a nominal cost, average lifespan of treatment is 12 months when well cared for.The main feature of the Helix CT interface is the built-in, ratcheting torque control mechanism that allows for a consistent, zero dead volume & chemically inert seal of the nebulizer.Replacement parts include NC1943061, NC2081825 & V-044, suggested to replace every 6 months.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Contour Flared End PVC Pump Tube 3tag, 72mm spacing, 1.52mm ID, Yellow/Blue (PKT 6)
Contour Flared End PVC Pump Tube 3tag 1.52mm ID Yellow/Blue (PKT 6).Tag Colors: Yellow/BlueID mm: 1.52Wall Thickness mm: 0.86OD mm: 3.24Overall Length: 455mm (72mm spacing between tags)Number of Tubes Per Pack: 6Physical Properties: Thermoplastic, PVC based material with plasticizerMaterial: Made from Tygon R3603/R3607 or equivalent.Special Properties: Inexpensive all-around tubing for general laboratory applicationsChemical Compatibility: Excellent for aqueous solutions of the following acids and concentrations, up to 35% Nitric Acid, up to 37% Hydrochloric Acid, up to 25% Hydrofluoric Acid, up to 30% Hydrogen Peroxide.Limitations: Potential leaching of plasticizersGlass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Tracey TFE Spray Chamber with Helix CT 50ml cyclonic, PTFE. Includes UFT-16-75 and UFT-2-700 UniFit Connectors (1 each) and 70-803-1439 Helix CT locking screw with seal (1 unit)
Tracey PTFE spray chamber, includes Helix CT locking screw & seal, UniFit 1.6mm OD x 0.75mm ID x 700mm long tube, & UniFit 2.0mm OD x 0.86mm ID x 700mm long tube (1 ea). Made from PTFE, 50mL volume. Compatible with Horiba 24, 38 & 138 Series, Ultima, Activa ICP-OES.The Tracey PTFE is a HF-resistant cyclonic design with a proprietary Stediflow surface treatment that significantly improves sensitivity & precision, in addition to enhancing washout efficiency compared to other inert spray chamber designs. The interior surface can be refurbished at a nominal cost, average lifespan of treatment is 12 months when well cared for.The main feature of the Helix CT interface is the built-in, ratcheting torque control mechanism that allows for a consistent, zero dead volume & chemically inert seal of the nebulizer.Replacement parts include NC1943061, UFT-2-700, NC2081825 & V-044, suggested to replace every 6 months.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion PVC Pump Tube 2tag, 152mm spacing, 2.29mm ID, Purple/Black (PKT 12)
PVC Pump Tube 2tag 2.29mm ID Purple/Black (PKT 12).Tag Colors: Purple/BlackID mm: 2.29Wall Thickness mm: 0.86OD mm: 4.01Overall Length: 455mm (152mm spacing between tags)Number of Tubes Per Pack: 12Physical Properties: Thermoplastic, PVC based material with plasticizerMaterial: Made from Tygon R3603/R3607 or equivalent.Special Properties: Inexpensive all-around tubing for general laboratory applicationsChemical Compatibility: Excellent for aqueous solutions of the following acids and concentrations, up to 35% Nitric Acid, up to 37% Hydrochloric Acid, up to 25% Hydrofluoric Acid, up to 30% Hydrogen Peroxide.Limitations: Potential leaching of plasticizersGlass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Quartz Torch with 2.0mm Injector for X Series
Quartz Torch, single-piece, 2.0 mm id injector, for routine aqueous analysis with Thermo X-Series ICP-MS (3601147 and 3600791). Suitable for routine aqueous applications but not inert to samples containing hydrofluoric acid (HF).Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Quartz Outer Tube for 5100/5110 RV D-Torch
Quartz Outer Tube for D-Torch. Compatible with Agilent 5100/5110 RV D-Torch (30-808-3590, 501907032). The D-Torch, provides a robust and high-performing alternative to both single-piece and semi-demountable quartz torches, ensuring greater robustness and a lower cost of ownership. With the D-Torch design, the analyst most often replaces only the outer tube, rather than replacing the entire torch or a quartz torch body.When not in use, clean as per recommended guidelines, and store in original box.If analyzing high salt, fusions, wear metals in oil, hydrofluoric acid (HF) or volatile organics, we recommend the ceramic outer tube P/N 501907236, which does not devitrify or crack from thermal shock, like quartz. Compared to quartz outer tubes, the ceramic alternative has an extended lifespan, significantly reducing maintenance, cleaning, and downtime caused by torch failure.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Elegra Argon Humidifier
Elegra Argon Humidifier. A universal kit for other ICP-OES/ICP-MS instruments. An argon humidifier is commonly used in ICP analyses involving samples with high concentrations of dissolved solids. It helps to alleviate salt deposits in the nebulizer & torch injector, allowing uninterrupted & maintenance-free operation. Compact, durable, cost-effective design with a non-pressurized water reservoir, & no heating or electric power required. An easy-to-use bypass switch allows you to take the Elegra off-line without disconnecting argon lines. Highly efficient membrane humidification technology that consistently maintains signal stability for samples with high TDS. Inert & metal-free eliminates possibility of contamination. Simple to use & maintain with maximum & minimum fill lines ensuring you are always operating under optimum conditions.Replacement Elegra Membrane, P/N 70-803-1286. Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-900
Glass Expansion Ceramic Outer Tube for 5100/5110 SVDV/VDV D-Torch
Ceramic Outer Tube for D-Torch. Compatible with Agilent 5000 Series SVDV/VDV D-Torch (30-808-3560). Compared to quartz outer tubes, the ceramic alternative has an extended lifespan, significantly reducing maintenance, cleaning, and downtime caused by torch failure. Incorporating a ceramic outer tube into your ICP torch has a range of benefits, particularly for the analysis of high-TDS sample matrices, fusions, wear metals in oil, hydrofluoric acid (HF) and volatile organics. In addition to providing durability, the ceramic outer tube on an ICP torch produces a hotter, more robust plasma, which reduces matrix effects and improves sensitivities and detection limits, compared to a quartz torch.When not in use, clean as per recommended guidelines, and store in original box.Optional quartz outer tube P/N NC2125299.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Gas Fitting with Ratchet Nebulizer Connector for Agilent 7700/7900/8800/8900
Direct Connect (DC) Nebulizer Gas Fitting Type 13. Contains Ratchet Connector Gas Line 14-28 x 500 Assembly (70-803-1505) and ICP Gas Inlet Fitting (70-803-1504). For argon gas connection between DC nebulizer and instrument argon gas supply fitting. Suitable for A13- and A31- DC Nebulizers. Compatible with ICP models: Agilent 5100/5110/5800/5900 ICP-OES, Agilent 7700/7800/7850/7900/8800/8900 ICP-MS, Horiba, Thermo 6000/7000 ICP-OES and X-Series/Q/RQ/TQ ICP-MS, Analytic Jena ICP-OES, PG Instruments and Advion.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001