X-Ray Sources and Systems
Mti Corporation ZERO DIFFRACTION PLATE
- Crystal material: Si, P-type B-doped
- Resistivity: 10-15 ohm.cm
- Diameter: 32 mm
- Thickness: 2 mm
- Surface finish: One side optical polished
- Application: Powder XRD sample holder
- Diffraction angle range: 20 to 120 degrees (2θ angle Cu Ka X-Ray)
- Background noise: Zero
- Crystal orientation: Special orientation
- Compatibility: Siemens, Scintag, Rigaku XRD systems
PARTICLE MEASURING SYSTEMS INC EL R BATT LI-ION 14.4V 6.6AH
- Battery chemistry: Lithium-ion (Li-ion)
- Nominal voltage: 14.4 V
- Capacity: 6.6 Ah
- Primary device compatibility: Lasair Pro Airborne Portable Particle Counter
- Rechargeable: true
- Core function: Portable power supply
- Application suitability: Regulated cleanroom and field operations
- Design characteristic: Lightweight
- Operational durability: High cycle life
- Energy density: High
Source One Healthcare Technologies Inc New Spectra Fixer (2 per case)
Excellent clearing characteristics. Can be used with all SourceOne developers One Case = 2 CADI-PAKS. 1 CADI-PAK makes 5 gallons for 10 gallons total
Perkin Elmer US LLC Microfocus Beam Condenser - KBr
The Microfocus Beam Condenser is a simple two lens linear optical system that ensures easy alignment and high throughput over a wide working wavelength range. The required DC-2 Diamond Compression Cell compresses samples to a thickness that is ideal for transmission experiments. .
Med Vet International Heavy Duty Chrome Hanger for X-Ray Apron, J0676H, Each
Heavy duty chrome hanger: chrome plate 3/16” recommended to protect x-ray aprons and increase product life. Hanger will hold up to 50lb (22.7kg)
Med Vet International Vet Mitt X-Ray Gloves, J0677M, Each
Features a palm slit allowing fingers to exit for freedom of movement but still cover top of hand during radiology. Royal blue nylon. Standard protection: 0.5mm Pb equivalency.•The protective gloves and mitten are mainly used by the operators to guard against the rays during their operation.•The medical Xray protective glove and mitten are processed by rubber.
Med Vet International Digital X-Ray Calibration Ball, 25mm, J1185B
Taking radiographs where the area of interest is not close to the plate creates some challenges in scaling. This is true of both digital and analogue systems. When using the radiograph for templating implants e.g. total hip replacement it is very important to make accurate measurements.The Reference ball is 25mm in diameter and is attached to a stable base by a flexible neck which allows the ball to be placed at the same level above the plate as the area of interest. Using a spherical object as a refer-ence eliminates errors created by ruler type reference which might not be quite parallel with the plateRadiographic Reference Ball 25mm diameter.
Premier Lab Supply 40mm XRF Sample Cups – PN# SC-4140
40mm Single-Open Ended XRF Sample Cup with Cup & 2 Rings (PN# SC-4140) – Suitable for Universal – OD: 40mm; ID: 32mm; Height: 23mm; Volume: 18mL – 100 per bag