Slide Mounting Media
Electron Microscopy Sciences Technovit 8100 Histo Set
Foils, 100 pieces Histobloc, Histoform S or Q Embedding Mold, 100 piece Histoknife H, microtome knife holder, 17 or 22 cm, Technovit 3040, 100g powder and 80 ml liquid.
Electron Microscopy Sciences EMS Glycerol Mounting Medium 100 ML
This aqueous mounting medium made with glycerol is for preserving fluorescence of tissue and cell smears. It is excellent for preserving thick sections that can not be mounted with mounting medium or fresh frozen tissues containing lipids, e.g. brain tissue.
This mounting medium is also useful for immunofluorescence. This unique formula prevents rapid photobleaching of FITC, Texas Red, AMCA, Cy dyes, Alexa fluoro 488, Alexa fluoro 594, Green fluorescent protein (GFP), tetramethyly rhodamine and Redox. The fluorescence is retained during prolonged storage at 4 degree C in the dark. This medium does not contain phenylenediamine, which destroys immunofluorescence of Cy dyes.
Not recommended for phycoethyrin (PE), phycocyanin (PC) and allophycocyanin (APC).
Reagent: Ready to use mounting medium for IHC and immunofluorescence (IF).
Refractive Index: 1.472. Storage at temperature of 2-8 degree C is recommended. Protect from light.
Vector Laboratories VECTASHIELD® HardSet™ Antifade Mounting Medium With Phalloidin 10 ml
VECTASHIELD®HardSet™ Mounting Medium prevents rapid photobleaching of fluorescent proteins and dyes. After approximately 15 minutes at room temperature, the mounting medium will harden, the coverslip will become immobilized, and optimal antifade ability and refractive index of 1.46 will be achieved. Mounted slides should be stored at 4 degrees C, protected from light. VECTASHIELD HardSet Mounting Medium is compatible with a wide array of fluorochromes, enzymatic substrates, and fluorescent proteins. The refractive index is 1.45. This formulation of VECTASHIELD HardSet Mounting Medium contains TRITC-phalloidin. Fluorescent derivatives of phalloidin are used to stain actin filaments. TRITC (tetramethylrhodamine) is excited at 544 nm and emits at 572 nm, producing an orange-red fluorescence.
AdipoGen DAPI 2HCl Solution 10mM water
Chemical. CAS 28718-90-3. Formula C16H15N5 . 2HCl. MW 350.25. DAPI 4,6-Diamidino-2-phenylindole dihydrochloride is a cell permeable, fluorescent dye that is a minor groove-binding probe for DNA. Binds to the minor groove of double-stranded DNA preferentially to AT rich DNA, forming a stable complex which fluoresces approximately 20 times greater than DAPI alone. DAPI is several times more sensitive than ethidium bromide for staining DNA in agarose gels. It may be used for photofootprinting of DNA, to detect annealed probes in blotting applications by specifically visualizing the double-stranded complex, and to study the changes in DNA and analyze DNA content during apoptosis using flow cytometry. DAPI staining has also been shown to be a sensitive and specific detection method for mycoplasma. Spectral Data Excitation lambdaex 340 nm Emission lambdaem 488 nm only DAPI. Excitation lambdaex 360nm Emission lambdaem 460nm DAPI-DNA complex.
Rarecyte RareCyte CyteMount Mounting Media
A solution that enables a coverslip to adhere to a microscope slide.
Electron Microscopy Sciences JB-4™ Embedding Kit 1 GR
A water soluble embedding media which is based on Glycol Methacrylate (GMA) plastic embedding. It is intended for use in preparing samples for high resolution microscopes (HRLM). The catalyzed monomer acts as a dehydration and infiltration agent; therefore, complete dehydration through 100% ethanol is not necessary (although recommended for large or dense tissues). Conventional paraffin sections have a greater degree of shrinkage and produce inadequate morphology when compared to JB-4. Kit includes 800 ml Solution A, 30 ml Solution B, 12 g catalyst.
Electron Microscopy Sciences UV Mounting Medium 100 ML
Mounting medium that is designed to match the refractive index of JB-4 embedded sections. Cures within 2 minutes when exposed to long wave UV light (365nm) when applied to moist sections. Sections are mounted after last staining water rinse. Slides must be coverslipped.
Leica Biosystems CV MOUNT
The CV Mount is suitable for all common robotic coverslippers as well as for manual coverslipping procedures.
Sigma Aldrich Fine Chemicals Biosciences fluoromountTM Aqueous Moun
FLUOROMOUNTTM fluoromountTM Aqueous Moun
Electron Microscopy Sciences DEPEX Mounting Media, 500ml
DEPEX Mounting Media is a colorless, neutral, xylene miscible mountant which is suitable for preparations where Canada Balsam is usually used. It comes in the amount of 500ml.
BIOHIPPO AAV-hSyn-DIO-mito-EGFP-P2A-tdTomato-WPRE-hGH-polyA
Recombinant adeno associated virus expressing EGFP mito-EGFP tdTomato under the hSyn promoter with WPRE and hGH polyA elements. The Cre dependent configuration enables expression only after recombination, providing precise targeted control of targeted neurons. Offered under the Biohippo AAVX Series with multiple serotypes available including AAV2/1, AAV2/2, AAV2/5, AAV2/6, AAV2/6m, AAV2/6.2FF, AAV2/7m8, AAV2/8, AAV2/9, AAV2/DJ, AAV2/DJ8, AAV2/Retro, AAV2/PHP.eB, AAV2/PHP.B, AAV2/rh10, AAV2/PHP.S, AAV2/anc80, AAV2/B10, AAV2/olig001, AAV2/BI30, AAV2/BR1, AAV2/MG1.2, AAV1/2, AAV2/MaCPNS1, and AAV2/MaCPNS2. Regular titer is greater than or equal to 2.00E+12 vg per mL, with high titer greater than or equal to 1.00E+13 vg per mL available upon request at no additional cost. Customers may specify preferred serotype and titer when placing orders.
Electron Microscopy Sciences Technovit Embedding Mold HistoForm Q
An important prerequisite for easy-to-cut specimens is a mold with a special profile which will provide specimen blocks for easy application and simple cutting. This is achieved with Histoform S, an embedding mold composed of new material with a special shape.
All essential requirements such as material-saving volume, easy-to-cut shape, unlimited shelf life, easy removal of the embedded specimens because of the conical shape and the PTFE material, excellent temperature dissipation by way of refined steel bottom, and accurate and easy fixing of the specimen blocks byspecial grooves were achieved with Histoform S, in cooperation with renowned users.
Curing temperature measurements have confirmed that at this volume the combination of Teflon and refined steel will result in a considerably lower polymerization temperature. Cavities are 20mm wide x16mm high x10mm deep.
Biotium EverBrite Mounting Medium, w/o DAPI, 10 mL
A revolutionary antifade mounting medium optimally formulated for preserving fluorescence of our CF dyes and other fluorochromes.
Abcam Anti-Fade Fluorescence Mounting Medium - Aqueous, Fluoroshield
Anti-Fade Fluorescence Mounting Medium - Aqueous, Fluoroshield
The product is subject to the following: Abcam Restricted Use Statement
Electron Microscopy Sciences LR White resin only; Med. Grade Catalyzed
A very low viscosity (8cps), non-toxic resin, suitable for both Light and Electron Microscopy. LR White is a polar monomer polyhydroxylated acromatic acrylic resin. It can be cured by heat or by UV light. Sections of polymerized LR White resin are hydrophilic. This character allows immuno-cytochemistry reagents to easily penetrate into the sections and etching of the sections is not necessary (etching sections will effect delicate tissue antigens). LR White sections also show minimal non-specific staining. Its low viscosity makes it ideal for infiltrating decalcified bone and teeth as well as plant tissues. It is available in medium and hard grade.