Slide Mounting Media
Electron Microscopy Sciences Depex Mounting Medium 100 ML
A colorless, neutral, xylene miscible mountant which is suitable for preparations where Canada Balsam is usually used.
Electron Microscopy Sciences Fluoro Gel with Dabco 1000 ML
Fluoro Gel with antifading agent 1, 4-Diazobicyclo-(2,2,2-octane (DABCO) is an aqueous mounting medium for preserving fluorescence of tissue and cell smears. This unique formula prevents rapid photobleaching of FITC, Texas Red, AMCA, Alexa fluoro 488, Alexa fluoro 594, Cy dyes, tetramethyly rhodamine, and Redox. The fluorescence is retained during prolonged storage at 4 degree C in the dark. Use for immunofluorescence and confocal microscopy. Storage at 2-8 degree C is recommended
Electron Microscopy Sciences Fluoro-Gel II Mounting Medium 30 ML
Fluoro-Gel is a water based mounting medium designed for the permanent mounting of fluorescent stained tissues, which may either be damaged or soluble in organic solvents, such as xylene or toluene. This unique formula prevents rapid photo-bleaching of FITC, Texas Red, AMCA, Cy2, Cy3, Cy5, Alexa Fluoro 488, Alexa Fluoro 594, Green Fluorescent Protein (GFP), Tetramethylyrhodamine, Redox, Phycoerythrin (RP-E), Phyocyanin (PC), and Allophycocyanin (APC).
The fluorescence is retained during prolonged storage at 4 degree C in the dark. Application: Immunofluorescence, confocal microscope. Contains DAPI (4, 6-diamino-2-phenylindole), a counter stain for DNA.
Enzo Life Sciences SEEBRIGHT Mounting Medium with DAPI (100tests)
SEEBRIGHT Mounting Medium with DAPI is an antifade reagent that minimizes photobleaching. Use of the mounting medium significantly extends the lifetime of fluorescent signals. The inclusion of DAPI allows for staining of the nucleus. Quantity: Each vial of SEEBRIGHT Mounting Medium with DAPI contains 200 µL sufficient for 20 tests (ENZ-GEN420-0020) or 1000 µL sufficient for 100 tests (ENZ-GEN420-0100). Apply mounting medium to the sample area as desired. Long Term Storage: +4°C. Applications: IF, Fluorescence microscopy, Fluorescent detection FISH.
Research Products International Corp HybriWell Sealing Covers, 21 x 40mm Chamber, 50-100ul Chamber Volume, 100 per Package
HybriWell covers seal securely to a microscope slide surface in seconds and can be easily removed after heating. These RNase free, hydrophobic covers eliminate the need for silanizing agents. Access ports allow convenient addition and removal of sample.
Mark V Laboratory Inc Green Phenolic Mounting Powder, 5 LBS.
This item has a minimum order quantity of 3 per supplier requirements Colored Phenolic Thermoset Powders are used in Mounting Press\"s for specimen mounting. Mounts are made at 150 degrees C at pressures between 3000-4200 psi. The different colors offer contrast to the parts being mounted when examined under a microscope.
Electron Microscopy Sciences LR White resin only; Med. Grade Catalyzed
A very low viscosity (8cps), non-toxic resin, suitable for both Light and Electron Microscopy. LR White is a polar monomer polyhydroxylated acromatic acrylic resin. It can be cured by heat or by UV light. Sections of polymerized LR White resin are hydrophilic. This character allows immuno-cytochemistry reagents to easily penetrate into the sections and etching of the sections is not necessary (etching sections will effect delicate tissue antigens). LR White sections also show minimal non-specific staining. Its low viscosity makes it ideal for infiltrating decalcified bone and teeth as well as plant tissues. It is available in medium and hard grade.
Electron Microscopy Sciences EMS Glycerol Mounting Medium w/ DAPI & DABCO 100 ML
EMS Glycerol with DAPI and DABCO is an aqueous mounting medium for preserving fluorescence of tissue and cell smears. It prevents rapid photobleaching of FITC, Texas Red, AMCA, Cy2, Cy3, Cy5, Alexa fluoro 488, Alexa fluoro 594, Green fluorescent protein (GFP), tetramethyly rhodamine, Redox. Fluorescence is retained during prolonged storage at 4 deg C in the dark.
This mounting medium is fortified with DAPI which is a counter-stain for DNA. This product is to be used in situ hybridization techniques or other methods where fluorescence of DNA staining is required. DAPI excites at 360nm and emits at 460nm, producing a blue fluorescence. RNA is also stained with DAPI.
Not recommended for phycoethyrin (PE), phycocyanin (PC) and allophycocyanin (APC).
Reagent: Ready to use mounting medium with anti-fading agent
Refractive Index: 1.4617
Electron Microscopy Sciences EUKITT Mounting Medium 100 ML
Eukitt is a mounting medium (5% Acrylic Resin and 55% Xylenes) that is used in microscopy. It is an adhesive and specimen preservative that can be used manually and in automated coverslipping equipment. Special purpose adhesive and sealant for use with glass, non plastic and other non-reactive materials. It spreads quickly and evenly withoutforming any air bubbles. It is fast-drying (20 minutes) with a refractive index close to glass. Chemically neutral and has no reaction to staining.
Electron Microscopy Sciences Limonene-Mount (Substitute for BioMeda Clarion Mount) 100 ML
This mounting medium is made with limonene, a natural product from orange peels. It preserves tissues and cell smears that can be dehydrated with organic solvents in immunohistochemistry, e.g. DAB and DAB with nickel or cobalt. Our Limonene-Mount also works well with alkaline phosphatase chromogens, and organic solvent resistant Supper Fast Red. It is also a good choice for mounting H and E stained slides. Application: Mounting tissues and cell smears.
Electron Microscopy Sciences EMS CCC Thinner 30 ML
An electrically Carbon Conductive Cement for specimen mounting in all SEM work. After drying of the cement, immediate investigation of conductive specimens is possible. Non-conductive specimens need only to be coated with carbon or metal. Thinner is available if the cement viscosity is too thick.
Electron Microscopy Sciences EUKITT Mounting Medium, 500 mL
The product holds up well in the presence of water and trace levels of Alcohol. It is very well suited for all pale color preparations as well as colorless preparations. EUKITT has a neutral pH and offers extended storage times of all slide preparations for years without any sign of cracking or discoloration. The medium itself is colorless and does not change the color and or the structure of the samples mounted with the medium. EUKITT is temperature resistant to heat and cold (-170°C), as well as humidity, daylight and UV light.
Electron Microscopy Sciences LR White Resin, Medium, Uncatalyzed 500 ML
A very low viscosity (8cps), non-toxic resin, suitable for both Light and Electron Microscopy. LR White is a polar monomer polyhydroxylated acromatic acrylic resin. It can be cured by heat or by UV light. Sections of polymerized LR White resin are hydrophilic. This character allows immuno-cytochemistry reagents to easily penetrate into the sections and etching of the sections is not necessary (etching sections will effect delicate tissue antigens). LR White sections also show minimal non-specific staining. Its low viscosity makes it ideal for infiltrating decalcified bone and teeth as well as plant tissues.
Electron Microscopy Sciences Citifluor™ Mountant Solution CFM-2, Glycerol Based, Non Hardening 25 ML
Citifluor mounting medium for immunofluorescence is designed to reduce the fading of the fluorescence of dyes used for labeling biological specimens. In the technique of fluorescence microscopy, the fluorescence is stimulated by high intensity UV and/or visible light. Absorption of the light populates an excited state of the dye (usually a singlet state) and this leads to fluorescence. However, the excited state of the dye may undergo chemical reaction, which leads to destruction as evidenced by the fading of the fluorescence and consequent loss of the image. Glycerol-tris amine buffered solution with a refractive index of ~1.52. pH 8.5.
Material: Glycerol Based
Type: Non Hardening
Electron Microscopy Sciences 3040 - Mounting Medium, 1/EA
Technovit 3040 yellow is a fast curing methyl methacrylate-based resin, whose chemical composition warrants a firm, durable bond between Technovit and the specimen. Technovit 3040 consists of two components–powder and liquid–allowing simple mixing, easy adherance to the specimen, and fast curing. For fixing the mount, a high viscous consistency is required(i.e. a mixing ratio of approximately 2-3 parts per volume powder: 1 part per volume liquid) has proven to be the most advantageous. Includes: 1 x 1000g Technovit 3040 powder, 1 x 500 ml Technovit 3040 liquid.