Slide Mounting Media
National Diagnostics HISTOMOUNT 450 ML
Histomount, Classic choice in synthetic mounting media, 450 ML
INNOVEX BIOSCIENCES PROBE MOUNT PERMANENT MOUNTING MEDIA 60 ML
Probe Mount, Mount Media 60ml 26628-22-8
Biocare Medical, LLC Fluoro Care Anti-Fade Mountant - 10 ml
Fluoro Care Anti-Fade Mountant is an innovative, liquid-based, anti-fade mounting medium designed especially for the permanent preservation of fluorescent specimens. Fluoro Care is to be used with tissue sections stained with a multitude of fluorescent dyes. Fluoro Care is compatible with DyLightTM Fluors, Alexa Fluors®, fluorescein, rhodamine, Texas Red and stained specimens.
Electron Microscopy Sciences EMS Silver Conductive Adhesive 478ss 15 GR
Our adhesive 478SS is a conductive, silver-based polymer which is used for thick film coatings where liquid silver is not an option. Once cured, it offers a very high Tg (glass transition temperature) 153 degree F (67 degree C) to prevent blocking, and offers superior adhesion to polyester film. Adhesive 478SS can be cured at 200 degree F (93 degree C) within 15 minutes. Higher temperatures will reduce the time needed to achieve a final cure.
Electron Microscopy Sciences LR White Resin, Medium, Uncatalyzed 500 ML
A very low viscosity (8cps), non-toxic resin, suitable for both Light and Electron Microscopy. LR White is a polar monomer polyhydroxylated acromatic acrylic resin. It can be cured by heat or by UV light. Sections of polymerized LR White resin are hydrophilic. This character allows immuno-cytochemistry reagents to easily penetrate into the sections and etching of the sections is not necessary (etching sections will effect delicate tissue antigens). LR White sections also show minimal non-specific staining. Its low viscosity makes it ideal for infiltrating decalcified bone and teeth as well as plant tissues.
Electron Microscopy Sciences EMbed 812, 450ml
EMbed 812 has the same characteristics as Epon 812, physically, and provides the same results in preservation, handling, curing and sectioning. EMbed 812 may cause etching on selected plastics. All formulas for mixing and using Epon 812 can be applied to EMbed 812
Electron Microscopy Sciences LR White Resin, Hard, Uncatalyzed 500 ML
A very low viscosity (8cps), non-toxic resin, suitable for both Light and Electron Microscopy. LR White is a polar monomer polyhydroxylated acromatic acrylic resin. It can be cured by heat or by UV light. Sections of polymerized LR White resin are hydrophilic. This character allows immuno-cytochemistry reagents to easily penetrate into the sections and etching of the sections is not necessary (etching sections will effect delicate tissue antigens). LR White sections also show minimal non-specific staining. Its low viscosity makes it ideal for infiltrating decalcified bone and teeth as well as plant tissues.
Electron Microscopy Sciences Entellan Rapid Mounting Media 500 ML
Entellan is a rapid mounting media for microscopy. It can be used for long life preparations, without bubble formation at high ambient temperatures. Also for all dehydrated microscopic preparations. Cure time is 20 minutes at room temperature. It is colorless with an acid number less than 2.50 and a R.I. ND20 approx 1.49-1.5. (Contains xylene).
National Diagnostics OMNIMOUNT 100 ML
Omnimount, Universally compatible synthetic mounting medium. Ideally suited for use with HistoClear II, 100 ML
Electron Microscopy Sciences EUKITT 4400 LB Resin 500 ML
EUKITT 4400 LB is a single-component resin that polymerizes under UV light was specially developed for thin ground sectioning technology. It completely passes through hard and soft tissue and is used for embedding and preparing of sections for medical and technical applications. It is characterized by crystal-clear optics with a favorable refractive index, good fluidity and low shrinkage.
The hardening of the embedding medium is done by UV light of a wavelength of 365 nm with 2 x 9 W. The exposure takes place from two sides. During the exposure within the given time (see instruction manual/operating instructions) temperatures of 50°C will not be exceeded.
Fast staining is possible with all known methods, and with the same high quality.
EUKITT EMS 4400 LB does not contain monomers, therefore the vapour pressure is very low. As a consequence the user is not bothered by intense, toxic smell.
Electron Microscopy Sciences EMS CitraMount Mountant 500 ML
This butyl acetate and acrylic resin mixture is the first mounting medium developed for coverslipping directly from d-limonene based clearants. Superior results are also with xylene. CitraMount medium is recommended for manual coversliping only as it may cause damage to the valves of automated coverslippers. Clear seal has a drying time of less than 24 hours. Refractive index is 1.42 and Viscosity is 90 cP.
Electron Microscopy Sciences Clearium Mounting Media Mounting Media 16 OZ
Clear and coverslip your slide preparations in one easy step. This unique product eliminates the need for hazardous xylene or xylene substitutes as a clearing agent in histology and cytology laboratories. With Clearium, simply do away with the final step of clearing and coverslip directly from absolute isopropyl alcohol .