Slide Mounting Media
Slide Mounting Media
SouthernBiotech™ Fluoromount-G™ Slide Mounting Medium
Water soluble, nonfluorescing mounting medium
Scientific Device Fungi-Tape™
Provides an efficient way of performing slide mounts of fungi from primary cultures
Leica Biosystems MICROMOUNT MOUNTING MEDIA 1PT
Micromount is a rapid-drying, xylene-based mounting medium. An antioxidant is added to inhibit stain fading and prevent the formation of annual rings. Micromount sets up quickly, allowing slide preparations to be handled immediately after mounting. Micromount is soluble in xylene, toluene, and most xylene substitutes.
Vector Laboratories VECTASHIELD Antifade Mounting Medium 10 ml
VECTASHIELD Antifade Mounting Medium prevents rapid photobleaching of fluorescent proteins and dyes. It does not solidify, but remains a semi-liquid on the slide and can be stored without sealing. If desired, coverslips can be sealed around the perimeter with nail polish or a plastic sealant. Mounted slides should be stored at 4 degrees C, protected from light. VECTASHIELD Mounting Medium is compatible with a wide array of fluorochromes, enzymatic substrates, and fluorescent proteins, including many of the fluorophores used in super resolution methods like STORM, STED, and 3D-SIMM imaging, extending their lifetime and enhancing their photo-switching characteristics. (Olivier, N. et al., 2013, Biomedical Optics Express, Vol. 4 No. 6, pp. 885-899). The refractive index is 1.45. Ships at Ambient Temperature and Once received the storage temperature is 2-8 °C.
Vector Laboratories VECTASHIELD Antifade Mounting Medium With DAPI 10 ml
VECTASHIELD Antifade Mounting Medium prevents rapid photobleaching of fluorescent proteins and dyes. It remains a semi-liquid on the slide. If desired, coverslips can be sealed around the perimeter with nail polish or a plastic sealant. Mounted slides should be stored in the dark at 4 degrees C. VECTASHIELD Mounting Medium is compatible with a wide array of fluorochromes, enzymatic substrates, and fluorescent proteins. The refractive index is 1.45. DAPI is a counterstain that binds to nuclei and causes them to fluoresce with a blue color. This is useful for Fluorescence In Situ Hybridization (FISH) assays and other techniques where a general orientation to the location of nuclei and cells is helpful.
StatLab CLEAR MOUNT
A fast drying permanent mounting medium that is compatible with all clearing agents. ClearMount is formulated for manual and automated coverslipping.
StatLab MOUNTING MEDIUM 1 PINT SIZE
Mounting Medium; Clear Mount; Master Tech; 1 pt.; Probably the fastest drying mounting medium; Clear Mount is compatible with virtually all clearing agents; Coverslipping with Clear Mount is simple, fast, and inexpensive
Vector Laboratories VECTASHIELD HardSet™ Antifade Mounting Medium With DAPI 10 ml
VECTASHIELDHardSet™ Mounting Medium prevents rapid photobleaching of fluorescent proteins and dyes. After approximately 15 minutes at room temperature, the mounting medium will harden, the coverslip will become immobilized, and optimal antifade ability and refractive index of 1.46 will be achieved. Mounted slides should be stored at 4 degrees C, protected from light. VECTASHIELD HardSet Mounting Medium is compatible with a wide array of fluorochromes, enzymatic substrates, and fluorescent proteins. The refractive index is 1.45. DAPI is a counterstain that binds to nucleii and causes them to fluoresce with a blue color. This is useful for Fluorescence In Situ Hybridization (FISH) assays and other techniques where a general orientation to the location of cells and nucleii is helpful. An attractive alternative to VECTASHIELD HardSet with DAPI is VECTASHIELD Vibrance™ with DAPI (NC1601055).
Vector Laboratories VECTASHIELD Vibrance Antifade Mounting Medium 10 ml
VECTASHIELD Vibrance Antifade Mounting Medium offers superior protection against photobleaching during fluorescence-based imaging of cells and tissue sections. It is supplied as an aqueous, ready-to-use formulation, no sealing is required, and sections may be viewed after only one hour. There is minimal bubble formation, retraction or background development over extended room temperature slide storage. It works well with dyes and other fluors across the spectrum, including those with far-red fluorescence. The refractive index after curing is 1.47. 12-month expiration.
Vector Laboratories VECTASHIELD HardSet™ Antifade Mounting Medium 10 ml
VECTASHIELD®HardSet™ Mounting Medium prevents rapid photobleaching of fluorescent proteins and dyes. After approximately 15 minutes at room temperature, the coverslip will become immobilized, and optimal antifade ability and refractive index of 1.46 will be achieved. Mounted slides should be stored at 4 degrees C, protected from light. An attractive alternative to VECTASHIELD HardSet Mounting Medium is VECTASHIELD®Vibrance™ (NC1551231), which has improved antifade and handling characteristics. VECTASHIELD HardSet Mounting Medium is compatible with a wide array of fluorochromes, enzymatic substrates, and fluorescent proteins. The refractive index is 1.45.
Vector Laboratories VECTASHIELD Vibrance Antifade Mounting Medium with DAPI 10 ml
VECTASHIELD Vibrance Antifade Mounting Medium with DAPI offers superior protection against photobleaching during fluorescence-based imaging of cells and tissue sections. It is supplied as an aqueous, ready-to-use formulation with a blue fluorescent counterstain. No sealing is required, and sections may be viewed after only one hour. There is minimal bubble formation, retraction or background development over extended room temperature slide storage. It works well with dyes and other fluors across the spectrum, including those with far-red fluorescence. The refractive index after curing is 1.47. 12-month expiration.