Embedding Accessories
Electron Microscopy Sciences Easy-Load Cover for Biopsy Cassettes, White
One-piece disposable plastic, it can be opened and closed as often as necessary and it always relocks securely without danger of specimen loss.
Color: White
Electron Microscopy Sciences Mold for Cell Culture
This mold is designed primarily for embedding cell culture specimens grown either directly on the bottom of a dish or on the filter when cross sections of the cells are needed. Cells grown on petri dishes are cut into strips just before the propylene oxide dehydration step; when Propylene Oxide is added, the strips lift right off the bottom. When the strips are ready for embedment, they are rolled on an applicator stick into a wad and gently lowered into the well (the strips should not float).
Advatages
Many cells can be examined in cross section.
There is no need for trimming.
The curved side makes the tip very strong in spite of its thinness.
Easy detection of a strip of cells.
The label is placed on the round part so as not to interfere with the specimen.
24 cavities.
Electron Microscopy Sciences Mold for Long Tissues
Accommodates longer pieces of tissues and makes it easy to embed long specimens and orient them properly. Tissues lie flat in the well. Ideal for any specimen that needs immediate sectioning (e.g. cell monolayer), 24 cavities
Electron Microscopy Sciences Slide Duplicating Mold, 3 Cavity
Uses a 1x3" glass slide as a base, and duplicates the slide using the resin of your choice. Tissue sections are embedded against the flat glass surface. This duplicated resin slide can be studied under the Light Microscope, then cut, remounted, resectioned, and studied under the EM. A three cavity mold, each cavity measuring: 1"(W)x3"(L)x3/32"(D). Reference and Instructions enclosed
Electron Microscopy Sciences Slide Duplicating withCover Slip
The same design as above 70170 but with the addition of three round cavities which are 17 mm in diameter and 1 mm deep.
Electron Microscopy Sciences SupaMega Stainless Steel Base Molds 36x36x10 mm, 10 mm height
The SupaMega range of stainless steel base molds have extra deep side walls allowing wax to be decanted into the cassettes during embedding without the risk of the usual leakage of wax. The smaller faced mold also saves wax on medium sized blocks too large to fit into standard cassettes negating the use of full size molds.
Size: 36 x 36 mm
Height: 10 mm
Electron Microscopy Sciences Easy-Molds™ for size 3 Capsules, 5.6 mm diameter
A newly designed mold which is convenient and offers better embedments. This tray-and-mold in one unit offers a unique specimen block that no other mold can. Each tray contains 2x10 block molds and measures 87x66 mm. Size: 5.6mm diameter corresponds to capsules size 3, and forms a block face of 1.6mm.
Electron Microscopy Sciences Biopsy Bags, Size: 74 x 94 mm., 100/PK
These bags are made from porous paper which provides maximum tissue safety during processing. They permit proper fluid exchange and drainage. To Use simply introduce the specimen into the bag and fold it enclosing the cassette or capsule. You are now ready to process as usual. Size: 74 x 94 mm.
Electron Microscopy Sciences Paraffin TMA ArrayMold E, Blue, 1.5 mm diameter, 72 cores per mold Capacity
The Arraymold is the simple tool for laboratories to perform Paraffin tissue microarrays (TMAs) w/ less time while maintaining excellent results. Process up to 150 specimens onto one single slide w/ very little time consuming, minimal technical training. The DVD instruction is accompanying w/ each kit, will step by step guide you to perform through the entire TMAs process. Arraymolds allow pathologist or researcher to view many different samples on the same single slide. Helpful in finding IHC markers for control or quality assurance from hundreds of samples. Staining markers will be more consistent when hundreds of samples are on one slide. Used less costly antibody.Arraymold kit is small enough to be stored in a drawer.Rubber arraymold can be reused many times without losing its flexibility. Generates 1.5 mm diameter sample core, 72 cores per mold. Kit: 10 Disposable 2mm sterile dermal needles, 2 Stylets, 1 Brass Plate, 1 1.5mm reusable rubber Arraymold, DVD.Color: Blue
Electron Microscopy Sciences TI Embedding Rings
The most difficult step of cross-sectional thinning is the mechanical preparation of the sample, i.e. cutting a cross section and then embedding it into an appropriately designed ring. We now offer a convenient, specially designed embedding ring for cross-sectional samples.
Using this ring, embedding cross sections is greatly simplified, since the samples do not need to be glued together prior to embedding. In order to fix the sample(s) in the ring, it is deformed mechanically by an appropriate tool at the two points marked by the arrows. This deformation will both hold the sample in the ring and press both sample pieces together before gluing. Ti disc is also offered for embedding bulk samples of brittle material for plan-view TEM investigations. The rings come in 5 sizes-0.6, 0.8 1.0, 1.2, 1.3 mm.
PENTAIR AQUATIC ECO SYSTEMS INC FILT BGS W/POLY MTH 100MICRON
NC2979794 FILT BGS W/POLY MTH 100MICRON
Ted Pella Inc Disposable Base Molds, 24 x 24 x 5mm, 500/box
Disposable base molds offer ease and convenience of operation. They are inexpensive enough to be discarded after use, yet strong enough to be reused. Made of PVC, they offer excellent thermal exchange. They have a smooth interior finish and rounded corners to facilitate their removal. Also, they are available in the same variety of sizes as metal molds and can be used with the same styles or types of cassettes and embedding rings.