Combination Ion Selective Electrodes
Oakton by Cole-Parmer Autoclavable pH Probe, Sealed/DJ/Glass; 210 mm
These electrodes are designed for insertion in RADIOMETER mountings or Ingold nonpressurized assemblies 761-351, 761-361, and 361CH-361 (12 mm dia.) Sealed, gel-filled, double-junction reference electrodes require no refilling, and offer long-term stability and extend service life.
Oakton by Cole-Parmer Ion-Selective Electrode (ISE), Nitrate, Double-Junction, BNC
Easily fit this electrode of nitrate with glass body into small spaces without any added reference electrode.
Oakton by Cole-Parmer ISE Electrode, Ammonia, Loose Membrane Cap; BNC
Easy-to-use, single-junction electrodes feature durable, epoxy bodies.The electrode design lessens errors and provides accurate results within 30 seconds, depending on solution concentration. Concentration range is 0.01 to 17,000 ppm. Use it over a 0 to 50 degree Celsius temperature range and above pH 11. The BNC connector and one-meter cable allow you to use with almost any existing meter.
Cole-Parmer Insertion/Submersion pH Probe; SJ/CPVC/100Ohm RTD; Tinned/BNC
In-line or submersible electrodes with probe guard operate from 23 to 176°>F (-5 to 80°>C) and have a PVC housing with a 3/4'' NPT(M) fitting on both ends. Epoxy body withstands pressures to 100 psi. Measure pH from 0 to 14. All electrodes measure 6-3/4''L x 1'' OD, with a 1-3/4'' insertion depth.
Hamilton Robotics EASYFERM PLUS PHI K8 325
Sensor Output- Traditional: mVa-length- 325 mmElectrical Connector-K8.Measuring Range pH 0 to 14.
Cole-Parmer Oakton Ion Selective Electrodes (Connector: BNC)
A wide variety of ion selective electrodes are availabe to suit a wide array of applications. Select from four electrode types: membrane, solid-state, gas sensing, and glass bulb; typical response time is 20 to 30 seconds. Epoxy-body ISEs are either single- or double-junction, and the glass-body type is double junction.
Cole-Parmer Oakton Ion Selective Electrode (ISE), Single-Junction, Epoxy; Nitrate
A wide variety of ion selective electrodes are availabe to suit a wide array of applications. Select from four electrode types: membrane, solid-state, gas sensing, and glass bulb; typical response time is 20 to 30 seconds. Epoxy-body ISEs are either single- or double-junction, and the glass-body type is double junction.
Oakton by Cole-Parmer Ion-Selective Electrode (ISE), Perchlorate, Double-Junction, BNC
These fast and accurate electrodes do not require an external referencethey're easier to use than separate sensing and reference half-cell electrodes. As double-junction combination ion-selective electrodes, they are convenient to use in places where two electrodes won't fit. All electrodes include a 30-mL bottle of reference solution, a reference filling pipette, 1-m cable, BNC connector, and an instruction manual. Use electrodes with a meter that has a resolution of 0.1 mV for the most accurate results.
Oakton by Cole-Parmer In-Line pH Probe, DJ/PVDF/100Ohm RTD/10'; Plug/BNC
This integral, one piece electrode and housing is installation convenience. Choose from single- or double-junction designs with BNC or tinned ends.
Oakton by Cole-Parmer Ion-Selective Electrode (ISE), Fluoride, Double-Junction, BNC
Easily fit this electrode of fluoride with glass body into small spaces without any added reference electrode.
Oakton by Cole-Parmer Combination Ion-Selective Electrode (ISE), Cyanide (CN)
Easily fit this electrode of cyanide with epoxy body into small spaces without any added reference electrode.
Oakton by Cole-Parmer Combination Ion-Selective Electrode (ISE), Copper (Cu+2)
Easily fit this electrode of copper with epoxy body into small spaces without any added reference electrode.