Chromatography Autosampler Vial Caps Only
Chemglass Life Sciences Poly Crimp Seal, 11mm, Clear Cap, PTFE/Silicone Septum with Starburst
Poly Crimp Seal, 11mm, Clear Cap, PTFE/Silicone Septum with Starburst. A crimp cap constructed of plastic that fits virtually any 11mm crimp sample vial. Use a standard crimping tool to securely crimp the Poly Crimp seal onto any crimp top vial. The Poly Crimp seal also permits an airtight seal by hand without crimping. Although the Poly Crimp seal can work with any crimp top vial, the tighter manufacturing tolerances and quality assurance program with the vials supplied by Chemglass certifies better performance when the cap is used with Chemglass supplied vials. Vials Compatible with Poly Crimp Seals: CV-1108-1232: Vial, 2.0mL, Clear, Snap Seal, 12 x 32mm, 11mm Crimp CV-1168-1232 : Vial, Standard Opening Crimp Top, Clear, 2.0mL, 12 x 32mm, 11mm Crimp CV-1185-1232 : Vial, Large Opening Crimp Top, Clear, 2.0mL, 12 x 32mm, 11mm Crimp CV-1200-1232 : Vial, Snap Ring, 2.0mL, Clear, 12 x 32mm, 11mm Crimp
Chemglass Life Sciences Glass Shaft Only, 9mm, 6000mL, 8000mL & 15000mL Spinner Flasks
Replacement Components for CLS-1410- and CLS-1411-Series Spinner Flasks.The Replacement Shaft consists of the glass shaft only.
Chemglass Life Sciences Aluminum Seal, 11mm, Red, Clear PTFE/Red Rubber
Aluminum Seal, 11mm, Red, Clear PTFE/Red Rubber. The 11mm anodized aluminum seals are manufactured to fit all 11mm crimp top vials and are available in a variety of colors. Medium durometer red rubber with a .015 layer of clear PTFE. Great and economical for routine analysis. Not recommended for multiple injections. Medium durometer red rubber with a .015 layer of clear PTFE. Great and economical for routine analysis. Not recommended for multiple injections.
Chemglass Life Sciences Aluminum Seal, 11mm, Gold, PTFE/Silicone
Aluminum Seal, 11mm, Gold, PTFE/Silicone. The 11mm anodized aluminum seals are manufactured to fit all 11mm crimp top vials and are available in a variety of colors. Pure Silicone laminated with .005 of PTFE. Recommended when multiple injections are required. Resist coring and excellent resealing qualities.
Chemglass Life Sciences Closure Only, 9mm, Clear, Top Seal, 10mil Molded Septa
Closure Only, 9mm, Clear, Top Seal, 10mil Molded Septa. Designed for use with Shimadzu, Spectra-Physics, Varian and other autosamplers. The Top Seal closure with a 0.010 molded septa allows for easy needle penetration and is inert to most solvents. The one-piece design saves time by eliminating liners in the closures.
Chemglass Life Sciences Aluminum Seal, 11mm, Green, Clear PTFE/Red Rubber
Aluminum Seal, 11mm, Green, Clear PTFE/Red Rubber. The 11mm anodized aluminum seals are manufactured to fit all 11mm crimp top vials and are available in a variety of colors. Medium durometer red rubber with a .015 layer of clear PTFE. Great and economical for routine analysis. Not recommended for multiple injections.
Chemglass Life Sciences Aluminum Seal, Pressure Release, Silver, 20mm, PTFE/Rubber Septa
Aluminum Seal, Pressure Release, Silver, 20mm, PTFE/Rubber Septa. Pressure release seals are designed to open when the internal pressure exceeds 3.00.5 bar.
Chemglass Life Sciences Aluminum Seal, 11mm, Green, PTFE/Silicone/PTFE
Aluminum Seal, 11mm, Green, PTFE/Silicone/PTFE. The 11mm anodized aluminum seals are manufactured to fit all 11mm crimp top vials and are available in a variety of colors. Medium durometer silicone with .003 silicone laminated on both sides. Great for trace analysis work. Resist coring and good resealing characteristics. Use with auto samplers with blunt tip syringes.
Chemglass Life Sciences Poly Crimp Seal, 11mm, Yellow Cap, PTFE/Silicone Septum
Poly Crimp Seal, 11mm, Yellow Cap, PTFE/Silicone Septum. A crimp cap constructed of plastic that fits virtually any 11mm crimp sample vial. Use a standard crimping tool to securely crimp the Poly Crimp seal onto any crimp top vial. The Poly Crimp seal also permits an airtight seal by hand without crimping. Although the Poly Crimp seal can work with any crimp top vial, the tighter manufacturing tolerances and quality assurance program with the vials supplied by Chemglass certifies better performance when the cap is used with Chemglass supplied vials. Vials Compatible with Poly Crimp Seals: CV-1108-1232: Vial, 2.0mL, Clear, Snap Seal, 12 x 32mm, 11mm Crimp CV-1168-1232 : Vial, Standard Opening Crimp Top, Clear, 2.0mL, 12 x 32mm, 11mm Crimp CV-1185-1232 : Vial, Large Opening Crimp Top, Clear, 2.0mL, 12 x 32mm, 11mm Crimp CV-1200-1232 : Vial, Snap Ring, 2.0mL, Clear, 12 x 32mm, 11mm Crimp
Leap PAL Parts L-MARK Brand Cap, Snap, PE, Blue, Red PTFE/Silicone, 11 mm, Case of 1000
L-MARK Brand, Cap, Snap, Polyethylene or PE, Blue, Red PTFE/Silicone, 11 mm, Case of 1000. Made in the USA.
Leap PAL Parts L-MARK Brand Snap Cap, Blue, PTFE/Red Rubber, 11 mm, Case of 1000
L-MARK Brand, Snap Cap, Polyethylene or PE, Blue, PTFE/Red Rubber, 11 mm, Case of 1000. Made in the USA.
Leap PAL Parts L-MARK Brand Cap, Crimp, Aluminum, Natural, PTFE/Silicone, 11mm, Case of 1000
L-MARK Brand Cap, Crimp, Aluminum, Natural, Red PTFE/White Silicone, 11mm, 0.040" thick, 1000/case. Made in the USA.
Leap PAL Parts L-MARK Brand, Cap, Screw, Polypropylene, Black, Red PTFE/White Silicone, Bonded, 15-425 Screw-Thread, Open Top, 100 Pack
L-MARK Brand, Cap, Screw, Polypropylene, Black, Red PTFE/White Silicone, Bonded, 15-425, Open Top, 100 Pack. Made in the USA.
Chemglass Life Sciences Bonded Closure, Standard, 9mm, Green, Open Hole, 0.40" PTFE/Silicone
Bonded Closure, Standard, 9mm, Green, Open Hole, 0.40" PTFE/Silicone. Bonded closures feature clear PTFE/Silicone liner bonded directly to the closure without the use of glue or adhesives. These bonded closures provide a cost effective, integrated, one-piece system that eliminates costly line fallout. Non-slit design.