Baths
Cole-Parmer IP-400 Low-Temperature Immersion Chiller, Rigid Coil Probe, -60 to -20C; 115V
Ideal for use with circulating baths, these chillers provide rapid, low-cost cooling of liquids to temperatures as low as -100C. Applications include cannabis extraction, cooling of exothermic reactions, freeze point determinations, botanical extraction, freeze drying, impact testing, lyophilization, and vapor and solvent trapping. The chillers are a cost-effective alternative to dry ice or liquid nitrogen.Simple to use. Just plug it in and immerse the stainless-steel probe in your fluid sample. A flexible hose allows convenient placement of the cooling probe. Please note, these chillers do not have an adjustable low temperature set point.Insulated flexible hose measures 4-ft (1.22 meters) long and 1.5" (3.81 cm) in diameter. Exposed rigid coil probe measures 15" (38.1 cm) long and 1.5" (3.81 cm) in diameter.
Andwin Scientific Yamato Immersion Cooler Device, Stainless Steel Flexible Tube Cooling Coil, 500mm length, 115V/220V
Easy to use benchtop immersion cooler with stainless steel flexible tube cooling coil used in combination with water bath. Cools down water bath immediately by dipping cooling coil into fluid. Stainless steel flexible cooling coil is high corrosion resistant. Improved safety by adopting overcurrent circuit breaker. Comes with handles for better usability. Temperature range from -20 ~ +35°C.
Sigma Aldrich Fine Chemicals Biosciences TrueNorthR Mini Cooler for
Protect temperature sensitive samples at the bench or in the freezer. Mini Coolers are ideal for keeping PCR reagents enzymes and other biochemical reagents cool while working at the bench. filled with insulating gel the mini coolers can also be used for ccontrolled sample freezing and for longer temperature retention samples.
Medicus Health MMassive Transfusion Protocol, MTP Transport Cooler, Blood Bank
Massive Transfusion Protocol (MTP) Blood Bank Transport Cooler combined with standardized components creates a cooler that can easily be reproduced by staff and includes all the tools necessary to comply with AABB and FDA requirements ∙ Massive Transfusion Protocol (MTP) Blood Bank Cooler System includes: (4) Color Coded Ice Packs, (2) Blood Unit Holders, Internal Content Dividers, Document Pocket, Return to Blood Bank Label Smooth surfaces are easy to clean and disinfect with no retention of bio-burden∙ Super duty nylon rope handles (removable)∙ Easy rolling cooler handle extends 39" from the floor ∙ Equipped with 4 inch diameter mag wheels∙ Recessed Zero-Leak Drain Plug for fast drainageRotomolded Coolers ∙ 3" inch thick insulated walls with seal style 15mm gasket ∙ Dual built-In stainless steel security seal loops for maintaining Chain of Custody∙ External Dimensions: 22”W x 18” D x 16”H; Internal Dimensions: 16.5”W x 11.5”D x 14”H
Sigma Aldrich Fine Chemicals Biosciences TrueNorthR Mini Cooler for
Protect temperature sensitive samples at the bench or in the freezer. Mini Coolers are ideal for keeping PCR reagents enzymes and other biochemical reagents cool while working at the bench. filled with insulating gel the mini coolers can also be used for ccontrolled sample freezing and for longer temperature retention samples.
Chemglass Life Sciences CoolCube Microtube and Microplate Cooler
CoolCube Microtube and Microplate Cooler. The CoolCube is designed to store samples safely on the lab bench without sample degradation due to temperature increase or fluctuation. Constructed of DuraStar (a high strength polymer) and a patented gel refrigerant, the CoolCube maintains temperature at approximately 0¿C for up to four hours. Simply place the CoolCube in a freezer overnight and it¿s ready for use, keeping samples cool and safe at the bench, without messy ice buckets or wet tubes. One side of the Benchmark CoolCube can be used as a convenient PCR workstation with wells for 12 standard 1.5/2.0mL microtubes and one 96 well PCR plate or 0.2mL tubes/strips. The other side can be used to hold 36 standard 1.5/2.0mL microtubes.
Julabo USA Inc FT900 IMMERSION COOLER-90+30C; 300W, 115V/60Hz
Chillers, Julabo, FT900 Immersion Cooler -90¿+30deg.C; 300W cooling power. JULABO Immersion Coolers provide counter-cooling when connected to a heating circulator or rapidly cool fluids down to a low temperature. With easy operation the units are suitable for a variety of cooling applications. Units are an alternative to cooling with dry ice or tap water.The FT200, FT400 and F900 units simply turn on and the probe cools. Models FT402, FT902 and FT903 include an external Pt100 sensor and display for input of temperature set point. The FT200 has a 9 cm long x 4 cm diameter cooling dumbbell. The FT400 / FT402 have a 12 cm long x 5 cm diameter cooling dumbbell. The FT900 / FT902 have a flexible cooling probe 65 cm long / 1.5 cm diameter.
Electron Microscopy Sciences Rachitome, 222 mm
EMS now offers these premium grade, hardened stainless steel autopsy instruments, featuring a protective coating for extra durability and protection from rust and corrosion. Satin-matt finish reduces eye-fatiguing glare.
OAL: 222 mm