Dry Block Incubators
USA Scientific Inc Mini Dry Heat Bath HC digital
Thermal-Lok Mini Dry Heat Bath HC with cooling (without blocks), digital display, 25C below ambient to 100C
MSC Value Collection V-Block, Hardened Steel, 90° Angle, 2-1/4 in. Capacity, 1 ea.
Value Collection V-Block, Hardened Steel, 90° Angle, 2-1/4 in. Capacity, 1 ea.
Ace Glass, Inc. Dynabloc base plate, 135mm diameter
135mm Dynabloc base plate made of anodized aluminum.
USA Scientific Inc Thermoblock deep well plates
Mixer HC thermoblock for one multiple or deep well plate, with lid
USA Scientific Inc 24-pl .5mL Thermal-Lok block
24-place aluminum block for 0.5 mL tubes, for Thermal-Lok dry bath. 3 W x 3.75 D x 2 H.
USA Scientific Inc Thermal-Lok 4-Position Dry Heat Bath
Thermal-Lok four block position dry heat bath (without blocks), digital display, 5C above ambient to 150C, 1-999 minute timer
Cole-Parmer Techne BLoCKICE Cooling/Heating Block, 100-230 VAC, 50/60 Hz
This benchtop chilling and heating block is ideal for incubating sample tubes at temperatures ranging from 32 to 104°F (0 to 40°C). The Isotemptemperature control ensures all contents are kept at an even temperature, whether cold or warm. Aluminum block inserts provide a temperature stability of±0.2°C for precise control of reaction temperature. Unit holds two single-width inserts or one double-width inserts. Integrated countdown/count-up timer with audible alarm allows up to nine days to be programmed and will not start until a stable temperature has been reached. A dark plastic lid protects light-sensitive reagents while maintaining the cooled environment.
Cole-Parmer Argos Technologies PolarSafe Aluminum Cooling Block, 15-Well for 1.5/2.0 mL Tubes
Place blocks on ice, dry ice, liquid nitrogen, or in a water bath. These anodized aluminum blocks can keep samples at or near 1°C for up to 8 hours in properly packed ice, or for 3 to 7 hours in dry ice. Choose the blocks that meet your application needs — configurations are available for 1.5-/2.0-mL microcentrifuge tubes and cryogenic vials, 0.5-mL tubes, and 96-well or 364-well plates.
Cole-Parmer Argos Technologies PolarSafe Aluminum Cooling Block, 96-Well for 0.2 mL Tubes
Place blocks on ice, dry ice, liquid nitrogen, or in a water bath. These anodized aluminum blocks can keep samples at or near 1°C for up to 8 hours in properly packed ice, or for 3 to 7 hours in dry ice. Choose the blocks that meet your application needs — configurations are available for 1.5-/2.0-mL microcentrifuge tubes and cryogenic vials, 0.5-mL tubes, and 96-well or 364-well plates.
Cole-Parmer Techne Dri-Block Digital Block Heater, Dual Insert, 200C; 115 VAC
Use these heaters as a dry, constant temperature source for various lab and research applications. All models have independent indicator lights to show main power, heater action, and over-temperature cut out. The "number of blocks accepted" on the ordering table indicate the number of single-width blocks accepted by each block heater. A heater that accepts two single-width blocks will accept one double-width block. Use three- and four-block models for high-throughput applications such as chemical oxygen demand (COD).
Andwin Scientific HEATING BLOCK
Modular Heating Block, 12-hole, holds Conical Bottom Centrifuge Tubes up to 15mL and 17.06mm dia. Solid aluminum, anodized blue modular block for producing maximum heat retention in and Signature Dry Block Heaters.
Cole-Parmer Techne Tecal 425F Portable/Field Dry Block Calibrator, 425°C; 120 VAC
These lightweight, portable dry block temperature calibrators are ideal for use in the field. They can be used with a wide range of inserts (not included) with different dimension wells to match numerous probe sizes. Safety features include an automatic cooling fan and overtemperature cutout which turns power off to the heaters if a fault develops or the unit exceeds maximum operating temperature. Temperature can be displayed in Celsius or Fahrenheit.
Ace Glass, Inc. Dynabloc block, 20mL & 30mL vial size, 18 (28x27.6mm) holes
20mL & 30mL vial size Dynabloc block with 18 size 28x27.6mm holes. The Dynabloc heating system supplies low-cost, highly efficient, simultaneous stirring and/ or heating of multiple samples contained within various sizes of small vials and tubes.