Standard Incubators
Percival Scientific Biological Incubator, I66VLH3, 62.4 cu. ft., vertical IncuWhite LED lighting, 5 tiers, pan-type hum., dehum. and electronic RH sensor, 4-44° C ±0.5°, IntellusUltra controller
The I66VLH3 incubator is frequently used for mosquitos, other insects, low light algae growth, or low cost seed germination. IncuWhite LEDs are dimmable between 5-100% output with up to 120 µmoles/m2/s irradiance @ 6” from the LEDs. Interior / exterior of smooth white galvanized steel with foamed-in-place non-CFC insulation and a stainless-steel floor for corrosion resistance. Pan-type humidifier, dehumidifier, and standard sensor maintain optimal humidity. Ten white epoxy coated steel wire shelves adjustable in ½” increments. Self-contained air-cooled condensing unit with hot gas bypass system for continuous compressor operation extends life, ensuring precise temperature control by alternately cycling refrigerant and hot gas to coil; this also prolongs life of compressor, and eliminates risk of ice build up in coil. Top mounted refrigeration system allows easy access for maintenance and cleaning. For additional options contact sales@percival-scientific.com for a free consultation.
Percival Scientific Biological Incubator, I66LLVL, 62.4 cu. ft., horizontal and vertical IncuWhite LED lighting, 4 tiers, 4-44° C ±0.5°, IntellusUltra controller
The I66LLVL incubator is frequently used for mosquitos and other insects, low light algae growth, or low cost seed germination. IncuWhite LEDs are dimmable between 5-100% output with up to 230 µmoles/m2/s irradiance @ 6” from the LEDs. Interior / exterior of smooth white galvanized steel with foamed-in-place non-CFC insulation and a stainless-steel floor for corrosion resistance. Eight white epoxy coated steel wire shelves adjustable in ½” increments. Self-contained air-cooled condensing unit with hot gas bypass system for continuous compressor operation extends life, ensuring precise temperature control by alternately cycling refrigerant and hot gas to coil; this also prolongs life of compressor, and eliminates risk of ice build up in coil. Top mounted refrigeration system allows easy access for maintenance and cleaning. For additional options contact sales@percival-scientific.com for a free consultation.
Percival Scientific Biological Incubator, I66NLH3, 62.4 cu. ft., non-lighted, 6 tiers, pan-type hum., dehum. and electronic RH sensor, 2-44° C ±0.5°, IntellusUltra controller
The I66NLH3 incubator is frequently used for C. elegans, nematodes, yeast/fungi, insects, bacteria and BOD. Interior / exterior of smooth white galvanized steel with foamed-in-place non-CFC insulation and a stainless-steel floor for corrosion resistance. Pan-type humidifier, dehumidifier, and standard sensor maintain optimal humidity. Twelve white epoxy coated steel wire shelves adjustable in ½” increments. Self-contained air-cooled condensing unit with hot gas bypass system for continuous compressor operation extends life, ensuring precise temperature control by alternately cycling refrigerant and hot gas to coil; this also prolongs life of compressor, and eliminates risk of ice build up in coil. Top mounted refrigeration system allows easy access for maintenance and cleaning. For additional options contact sales@percival-scientific.com for a free consultation.
Chemglass Life Sciences 3-Port Sparger Assy with Holes for 3L VSA Vessels
Our 3-port sparger assemblies with drilled holes, 0. 040” spaced 1/2” apart, and hose barbs are designed for vigorous aeration invertical side arm (VSA) vessels.These assemblies are constructed of 316L stainless steel, electro-polished to a 20Ra finish or better and include a blue polypropylene GL-45 open top cap and white silicone gasket.
Bellco Glass, Inc. Approx 25 x 34" (63.5 x 86.5cm).Stainless steel mesh with reinforcing bars.Fits on adjustable clips inside incubator.Load: 240 lbs (max).
Approx 25 x 34" (63.5 x 86.5cm).Stainless steel mesh with reinforcing bars.Fits on adjustable clips inside incubator.Load: 240 lbs (max).
Bellco Glass, Inc. The Bellco Bench Top Incubator was designed for the incubation of cell cultures and bacteria within laboratories where space is a premium. The instrument panel is mounted on top for easy viewing and manipulation. Glass door models allow the viewing of cul
The Bellco Bench Top Incubator was designed for the incubation of cell cultures and bacteria within laboratories where space is a premium. The instrument panel is mounted on top for easy viewing and manipulation. Glass door models allow the viewing of cul
Darwin Chambers Company NQ16P PORTABLE INCUBATOR
NQ16PLUS Interior dimensions: 12.7" L x 9" W x 8.3" H. Exterior dimensions: 16.7"L x 12.8"W x 11.2"H. Weight: 6.64 lbs. NQ Series have several uses, such as: Blood sample transport, Water treatment research, and Maintaining microbiological cultures for cell research. Exterior construction: Double-wall foam insulation of high-density polyethylene, Foamed-in-place, Closed-cell insulation. Interior: Molded poly with coved floor for ease of cleaning. TEMP RANGE: AMBIENT +5C to 37C,1.0C TOLERANCE - CONTROL READOUT: ACTUAL AND SET-POINT VALUES - SENSOR: TYPE T THERMOCOUPLE - CONTROLLER: MICROPROCESSOR BASED - CALIBRATION CAPABILITY: 1.0C OFFSET INCREMENTS - CORD LENGTH: 6FT
Bellco Glass, Inc. The Bellco Bench Top Incubator was designed for the incubation of cell cultures and bacteria within laboratories where space is a premium. The instrument panel is mounted on top for easy viewing and manipulation. Glass door models allow the viewing of cul
The Bellco Bench Top Incubator was designed for the incubation of cell cultures and bacteria within laboratories where space is a premium. The instrument panel is mounted on top for easy viewing and manipulation. Glass door models allow the viewing of cul
Chemglass Life Sciences Incubator, 2.0 Cu. Ft., General Purpose, 120V
Microprocessor Control / Digital LEDInterior Glass Door with Radius Corner. Unique Warm Air-Jacket Design. Heated Tempered Safety Glass Door. One Interior Outlet. Access Port. No Rivets; Seam Welded Panels and Doors. 24 Month Limited Warranty. The CLS-2440 series of general purpose incubators deliver a superior degree of temperature uniformity. This design requires no blowers or fans within the incubator chamber. Five strategically placed heating elements, including a heated outer door, ensure uniform heating while the unique air jacket design eliminates hot spots when the incubator chamber is fully loaded. The microprocessor controller achieves exceptional temperature control with no overshoot. Set point and actual chamber temperature are digitally displayed. Temperature calibration is easily performed by touch pad control. A totally independent secondary temperature controller offers the added safety of oven temperature protection.
Hach Company Low Temperature BOD Incubator
The Model SRI6P-2 B O D incubator is thermoelectric cooled eliminating the need for a refrigeration compressor The incubators include a mechanical convection system to ensure even air distribution digital temperature set controller over temperature limit control and a temperature display Two 75 pound capacity shelves are included A one amp interior outlet allows the use of shakers stirrers roller bottles or BODTrak apparatus Low Temperature Incubators are ideal for testing sewage and wastewater as well as other low room temperature applications 220VExterior dimensions 30 x 31 5 x 33 5 in (76 2 x 80 01 x 85 09 cm)
Sheldon Manufacturing Inc RI28 INCUBATOR 32.5CUFT
LABORATORY INCUBATOR, LARGE CAPACITY, 30.8 CU FT, SOLID DOOR w/ VIEW, ROLL-IN FLOOR, OUTLET, ACCESS PORT, 115V This incubator provides extra large capacities while minimizing the amount of floor space needed. The temperature in this large space is kept uniform by integrating a highly responsive microprocessor with an appropriately sized heating element. An independent secondary temperature controller offers the added security of over temperature protection. Our unique forced air circulation system creates a one-pass circulation pattern that provides both exceptional temperature uniformity and rapid heat recovery. The chamber floors are ruggedly reinforced to support roller apparatus or shakers. The SMI31 is supplied with six sturdy shelves that will not sag or bend under heavy loads. More information available at www.shellab.com