General Purpose Water Baths
Sigma Aldrich Fine Chemicals Biosciences MyBathTM Digital Water Bat1EA
MyBath water bath features easy to use controls that allow the user to digitally select and monitor temperatureThe temperature is shown on a large 3-digit display Accuracy /- 0.5C. Increments 0.1C. Uniformity /- 0.2CTest tube rack inserts are sold separatelyHinged lid provides a secure covered environment and can be flipped open (to the rear) or completely and instantly removedDrain allows for hassle-free water changesQuik-CAL user calibration functionSeamless stainless steel chamber the chambers resist rust and have no corners to collect dirt or contamination
Sigma Aldrich Fine Chemicals Biosciences JulaboR shaking water bath1EA
.nbspMicroprocessor technology.nbspSplash-proof mains switch.nbspKeypad for actual setpoint values high and low temperature warning functions.nbspMulti-Display (LED).nbspLarge bath volume.nbspReduced space requirement.nbspRS232 interface.nbspElectronic timerCover needs to be ordered separately.
Scilogex LLC SCILOGEX SCI220-H3 LCD Digital Magnetic Stirring Heated Water Bath, 3L Capacity , 110V, 60Hz
High borosilicate glass liner with window for monitoring reaction product changes.Dual-use stirring bath for water and oil, with optional stirring in the bath ensuring uniform heating of both bath liquid and sample.Features a timer function with a range of 1 min to 99h 59min. Heating continues when the countdown ends but continues stirring to prevent heat damage to the sample.Touch buttons with audible prompts. Working status indicator light: Green during operation, flashing green before reaching set temperature; alarm red.Reversible stirring function.Protection features: dry burning protection, over-current protection, ground fault protection, and over-temperature protection.Residual heat warning function. When the plate temperature is above 50°C, heating is turned off, and the screen flashes "HOT" as a reminder of the high temperature even after the power is off.DC brushless motor, spark-free, long life; low noise, maintenance-
Julabo USA Inc PURA 4; 4L water bath, 500 W heating power, RT to +99.9 °C (with accessory lid 9970580), 115V
PURA water baths from JULABO. All PURA water baths have an integrated drain tap. Stainless steel bath tanks with a sloped bottom makes draining easy. Units include a false bottom yielding a flat surface for sample vessels. No heating element in the bath. Easy operation with bright LED. Operation in °F or °C with integrated timer. Working temperature range from +18°C to +99.9°C (with accessory cooling coil and bath tank lid). Models with filling volumes from 4.8 to 36L. Temperature stability of ± 0.15°C. Heating capacity up to 2 kW. Bright display. Integrated protection against running dry. Transparent lift-up bath covers for PURA Water Baths up to 100°C. The bath cover is made of Plexiglas; reduces water evaporation during incubation.
Julabo USA Inc PURA 14; 14L water bath, 1.3 kW heating power, +18 to +99.9 °C (with accessory lid 9970582; accessory cooling coil 9970534), 115V
PURA water baths from JULABO. All PURA water baths have an integrated drain tap. Stainless steel bath tanks with a sloped bottom makes draining easy. Units include a false bottom yielding a flat surface for sample vessels. No heating element in the bath. Easy operation with bright LED. Operation in °F or °C with integrated timer. Working temperature range from +18°C to +99.9°C (with accessory cooling coil and bath tank lid). Models with filling volumes from 4.8 to 36L. Temperature stability of ± 0.15°C. Heating capacity up to 2 kW. Bright display. Integrated protection against running dry. Transparent lift-up bath covers for PURA Water Baths up to 100°C. The bath cover is made of Plexiglas; reduces water evaporation during incubation.
Koehler Instrument Company Inc LPG CORROSION WATER BATH
- Test method: Corrosiveness of LPG to copper
- Conforms to: ASTM D1838, GPA 2140, ISO 6251
- Capacity: 5 samples
- Bath temperature: 100 ± 1 °F (37.8 ± 0.5 °C)
- Temperature range: Ambient to 100 °F (37.8 °C)
- Temperature stability: ±0.09 °F (±0.05 °C)
- Bath medium: Water
- Bath volume: 6.1 gal (23.1 L)
- Inner wall construction: Polished stainless steel
- Outer wall construction: Powder coated steel
- Insulation: Fully insulated
- Electrical requirements: 115V 60Hz, Single Phase, 10A
Electron Microscopy Sciences EMS MyBath™ Water Bath, 4L, 230 V, Ambient +5 to 100°C Range
MyBath is designed to guarantee superior accuracy and performance in a compact footprint. MyBath models feature seamless, stainless steel chambers for easy cleaning and long life. The chambers resist rust and have no corners to collect dirt or contamination.
Adjustable in 0.1 degree C increments, the temperature is shown on a large, 3-digit display. The Quik-CAL allows for simple, in-lab calibration. High efficiency insulation maintains temperature stability and uniformity within the bath, while keeping the housing cool to the touch. Includes racks for 1.5/2.0, 15 & 50 ml tubes. Easy to digital controls to select and monitor settings.
Temp range: Ambient +5 to 100°C
Accuracy: ± 0.2°C at 37°C
Increment: 0.1°C
Uniformity: ± 0.2°C at 37°C
Chamber: 5.3 (W) x 9.4 (D) x 5.5 (H)"
Electron Microscopy Sciences EMS MyBath™ Water Bath, 8L, 230 V, Ambient +5 to 100°C temp range
MyBath is designed to guarantee superior accuracy and performance in a compact footprint. MyBath models feature seamless, stainless steel chambers for easy cleaning and long life. The chambers resist rust and have no corners to collect dirt or contamination.
Adjustable in 0.1 degree C increments, the temperature is shown on a large, 3-digit display. The Quik-CAL allows for simple, in-lab calibration. High efficiency insulation maintains temperature stability and uniformity within the bath, while keeping the housing cool to the touch. Easy to use controls to digitally select and monitor settings. Drains for water changes.
Temp range: Ambient +5 to 100°C
Accuracy: ± 0.5°C at 37°C
Increment: 0.1°C
Uniformity: ± 0.2°C at 37°C
Chamber: 12.8 (W) x 10.4 (D) x 5.9 (H)"