Choose the brand aligned with your industry so we can best serve your needs.
Allihn reflux condenser with a standard taper drip joint and a standard taper outer
Includes | Standard taper drip joint at bottom and a standard taper outer joint at top |
---|---|
Type | Allihn Condenser |
Standard Taper Joint No | 24/40 |
Diameter (Metric) Inner Tubing | 0.952 cm |
Material | Borosilicate Glass |
Certifications/Compliance | USP Type I and ASTM E438 Type I, Class A |
For Use With (Application) | Refluxing operations |
Diameter (English) Inner Tubing | 0.37 in. |
Outer joint at top and inner drip joint at the bottom.
Type | Graham Condenser |
---|---|
Standard Taper Joint No | 24/40 |
Material | Borosilicate Glass |
Certifications/Compliance | USP Type I, ASTM E438, Type I, Class A |
Liebig Condenser with Standard Taper Joints
With an internal, coil-type cold finger; Tightly wound coil
Type | Reflux Condenser |
---|---|
Standard Taper Joint No | 24/40 |
Quantity | Each |
Material | Borosilicate Glass |
Certifications/Compliance | USP Type I and ASTM E438, Type I, Class A |
For Use With (Application) | Condense high vapor pressure solvents like hexane |
For use in vacuum distillation
Diameter (Metric) Outer Jacket | 41 mm |
---|---|
Type | Graham Condenser |
Diameter (Metric) Outer Tubulation | 10 mm |
Diameter (English) Outer Tubulation | 0.39 in. |
Diameter (English) Outer Jacket | 1.61 in. |
Material | Pyrex Borosilicate Glass |
For Use With (Application) | For vacuum distillations |
Affords very efficient operation
For vacuum distillation
Type | Liebig Condenser |
---|---|
For Use With (Application) | For use in vacuum distillations |
For use in distillation setups
Diameter (Metric) Outer Jacket | 41 mm |
---|---|
Type | Graham Condenser |
Diameter (Metric) Outer Tubulation | 10 mm |
Diameter (English) Outer Tubulation | 0.39 in. |
Diameter (English) Outer Jacket | 1.61 in. |
Material | Pyrex Borosilicate Glass |
For Use With (Application) | For vacuum distillations |
Used to regulate refluxing by adjusting flow of air or water
Suited for use in vacuum distillation
Includes | Drip tip |
---|---|
Type | Allihn Condenser |
Diameter (Metric) Outer Tubulation | 1 cm |
Diameter (English) Outer Tubulation | 0.39 in. |
Material | Borosilicate Glass |
For Use With (Application) | Vacuum distillations |
Drip tip at end of inner joint
Includes | Standard taper drip joint at bottom and a standard taper outer joint at top |
---|---|
Type | Allihn Condenser |
Standard Taper Joint No | 24/40 |
Diameter (Metric) Inner Tubing | 0.952 cm |
Material | Borosilicate Glass |
Certifications/Compliance | USP Type I and ASTM E438 Type I, Class A |
For Use With (Application) | Refluxing operations |
Diameter (English) Inner Tubing | 0.37 in. |
Standard Taper outer joint at the top; standard Taper inner drip joint at the bottom.
Type | Condenser |
---|---|
Material | Borosilicate Glass |
Certifications/Compliance | USP Type I and ASTM E438, Type I, Class A requirements |
Replacement Allihn condenser with bulbs
Type | Replacement Allihn Condenser |
---|---|
Diameter (Metric) Outer Tubulation | 1 cm |
Diameter (English) Outer Tubulation | 0.39 in. |
Material | Borosilicate Glass |
Efficient non-flooding design
Type | Reflux Condenser |
---|---|
Standard Taper Joint No | 24/40 |
Material | Borosilicate Glass |
Certifications/Compliance | USP Type I and ASTM E438, Type I, Class A |
Type | Air Reflux Condenser |
---|---|
For Use With (Equipment) | Pyrex microchemistry kits |
Quantity | 6/Cs. |
Material | Pyrex Borosilicate Glass |