Cell Culture Flasks
Chemglass Life Sciences 12mm GL-45 Probe Holder, Compression Style
Our probe holders are designed to secure pH and DO probes into 45mm vertical sidearm vessels.Includes thermoplastic, polyester cap and silicone gasket.This assembly is designed to hold an Ingold pH or DO electrode securely in place in your cell culture vessel via the 45mm sidearm.It consists of: red high temperature 45mm screw cap, 316L SST probe holder with a Pg 13.5 thread, and a white silicone rubber liner. comes fully assembled for fast and easy set-up.
Chemglass Life Sciences 225cm² Cell Culture Flask, Yellow Vent Cap, Non-Treated, Sterile, 5/pk, 25/cs
Made from high clarity, 100% virgin polystyreneSterilized by E-beamClear lot number for batch traceabilityIndividually plastic wrappedNon-Pyrogenic, DNase/RNase FreeAngled neck for easy accessFrosted writing and clear graduationsNotched bottom for slip-free stackingVented caps (with breathable membrane)
Alkali Scientific BioFactory Systems Chambers Ce
BioFactorySystems are compact multi-layer single-use cell culture systems designed for easy scale-up cell culture applications such as production of vaccines monoclonal antibodies or pharmaceuticals Theyre versatile and easy-to-use systems for medium to large scale research or commercial production with reduced contamination risk Narrow mouth caps available for tubing solutions Available in five sizes 1-Chamber with 632cm2 cell growth area 2-Chamber with 1264cm2 cell growth area 5-Chamber with 3160cm2 cell growth area 10-Chamber with 6335 cm2 cell growth area 40-Chamber with 25295 cm2 cell growth area Made of high clarity 100% virgin polystyrene Sterilized by E-beam SAL10-6 Non-Pyrogenic DNase/Rnase free Individually packaged in double-layer sterile bags TC treated good for cell attachment and growth Clear lot number for batch traceability Ultrasonic welding without extrinsic ingredients Excellent welding line design can avoid producing particles during welding and make the b
Sigma Aldrich Fine Chemicals Biosciences TPPR tissue culture flasks
The inside surface treatment by TPP provides an optimal growth surface on the flask base for the most varied matrix-dependent tissue cultures. The untreated side and top inside surfaces reduce the amount of cell loss during the separation phases because undesired tissue adhesion outside the growth zone is diminished. The flasks innovative shape is of such a design that devices inserted through the flasks neck have optimal access to the entire base surface. This means that there are no dead corners that cannot be reached with pipettes or cell scrapers.This excellent accessibility is due to the large neck opening and the favorable angle of inclination. The angled neck also reduces the chance of accidental spills and permits dribble-free pouring.When the vented screw cap is tightened to the end position the closed tissue culture flask is liquid and gas tight. By simply unscrewing the cap one quarter of a turn the flask is in the VENT position with the inside of the flask being aerated
Research Products International Corp BioFlsk Erlnmyr Flask Baff Bot
BioFlast Cell Culture Erlenmeyer Flasks are made from a variety of disposable and autoclavable plastic. Vented screw caps (polypropylene) feature 0.2mm membranes to increase air transmission and enhance cell growth. Polycarbonated flasks and Jumbo Flasks have baffled (ribbed) bottoms to provide increased oxygenation and mixing efficiently even at lower shaking speeds. Custom mouth size conforms with the SBS standard for quick, secure connection to popular bioreactor equipment. Supplied individually wrapped and gamma sterilized (SAL 10-6 ).
RNase, DNase, Pyrogen free
Vented screw cap
Gamma sterilized
Individually wrapped
Chemglass Life Sciences Spinner Flask, 15000mL, Flat Bottom, Replacement Glass Flask ONLY
Replacement vessel is supplied with black phenolic, rubber lined caps for the 18mm side arms, polypropylene caps and pouring rings for the GL-32 and GL-45 side arms.
Bellco Glass, Inc. Flat Bottom AHB Spinner , 1000mL No Ctr Cap
Adjustable Hanging Bar Spinner Flask without Bottom Dimple. MADE IN THE USAPTFE impeller assembly rides on glass bearing for friction free operation. 25 & 50mL have black phenolic rubberlined center and sidearm caps.100mL-300mL have polypropylene caps, silicone gasket and pouring rings accumulation of microcarrier beads under impeller. 1000mL. Center cap: 100mm, side arm 45mm. Dimensions: 135 OD x 240 OAH
MSC Buyers Products Spinner, 9 in, Polyurethane, TGSUV1A/TGSUV1B Compatible
This replacement spinner is designed for use with SaltDogg TGSUV1A and TGSUV1B spreaders. Made from durable polyurethane, it features a 9 in diameter, ensuring reliable performance in various spreading applications.
- Designed for SaltDogg TGSUV1A and TGSUV1B spreaders.
- Constructed from durable polyurethane.
- Features a 9 in diameter.
- Ideal as a replacement part.
Chemglass Life Sciences 3-Port Sparger Assy with Frit for 3L VSA Vessels
Our 3-port sparger assemblies are designed for gentle aeration using a 10 micron frit invertical side arm (VSA) vessels.The frit is removable for easy cleaning.These assemblies are constructed of 316L stainless steel, electro-polished to a 20Ra finish or better and include a blue polypropylene GL-45 open top cap and white silicone gasket.