Cell Culture Flasks
Ace Glass, Inc. Flask, shake, 250mL, 3 extra deep baffle, beaded neck, cs/12
Flask, shake, 250mL, 3 extra deep baffle, beaded neck, cs/12
Ace Glass, Inc. Flask, trypsinizing, 3L, baffled, #10 stopper size beaded /2
3L trypsinizing flask with beaded neck and long side baffles. Ideal for converting homogenous tissue samples into cell suspensions by digestion of connective tissue. Heavy beaded neck accepts either cotton plugs or stoppers. The extra-deep baffles enhance vigorous agitation.
TWD Scientific LLC TWD BioX, 300CM2, 850mL, Vent Cap, Sterile, Cell Culture, 18/case
TWD BioX, 300CM2, 850mL, Vent Cap, Sterile, Cell Culture, 18/case
CPC Scientific H-Trp-Arg-Gln-Ala-Ala-Phe-Val-Asp-Ser-Tyr-OH (trifluoroacetate salt) 1MG
This is a Pannexin-1 (Panx1) mimetic blocking peptide. Pannexin-1 is a recently identified membrane protein that can form gap junction-like connections allowing intercellular passage of dyes when overexpressed in two adjacent oocytes or mammalian epithelial cell lines. Blockade of pannexin-1 in macrophage endogenously expressing the ATP-gated P2X7 receptor (P2X7R) blocks the initial dye uptake, but not the ionic current, and also blocks processing and release of interleukin-1α (IL-1α) in response to P2X7R activation. ONE-LETTER SEQUENCE: WRQAAFVDSYMOLECULAR FORMULA: C58H79N15O16MOLECULAR WEIGHT:1242.4STORAGE CONDITIONS: -20 5CRESEARCH AREA: Protein Kinases and PhosphatasesREFERENCES: Pelegrin, P. et al. EMBO. J. 25, 5071 (2006); Pelegrin, P. et al.t J. Biol. Chem. 282, 2386 (2007).
Bellco Glass, Inc. Manufactured from 316l stainless steel with electropolish finish. Ra 32 finish or better inside and out. Ideal use for cell culture and reduces shear in delicate cell culture. Blade dimension: 5 3/4 x 2" Shaft oal: 14 1/2" Constructed of 316l
Manufactured from 316l stainless steel with electropolish finish. Ra 32 finish or better inside and out. Ideal use for cell culture and reduces shear in delicate cell culture. Blade dimension: 5 3/4 x 2" Shaft oal: 14 1/2" Constructed of 316l
Bellco Glass, Inc. Promotes optimal growth of suspension and micro-carrier culture. Impeller height adjust through compression fitting center cap. The indented bottom prevents accumulation of micro-carrier beads under impeller. Size: 3l Sidearm cap: 45mm OD x oa
Promotes optimal growth of suspension and micro-carrier culture. Impeller height adjust through compression fitting center cap. The indented bottom prevents accumulation of micro-carrier beads under impeller. Size: 3l Sidearm cap: 45mm OD x oa
Bellco Glass, Inc. 250mL Erlenmeyer Flask Vent Cap Baffled Bottom PC Sterile
250mL Erlenmeyer Flask Vent Cap Baffled Bottom PC Sterile
Bellco Glass, Inc. Y Shape CPC Connector for Inner Dia 3/8 Hose Individually Wrapped Sterile 1/pk 5/cs
Y Shape CPC Connector for Inner Dia 3/8 Hose Individually Wrapped Sterile 1/pk 5/cs
Bellco Glass, Inc. Promotes optimal growth of suspension and micro-carrier culture. Impeller height adjust through compression fitting center cap. The indented bottom prevents accumulation of micro-carrier beads under impeller Size: 100ml Sidearm cap: 32mm OD x
Promotes optimal growth of suspension and micro-carrier culture. Impeller height adjust through compression fitting center cap. The indented bottom prevents accumulation of micro-carrier beads under impeller Size: 100ml Sidearm cap: 32mm OD x
Alkali Scientific Erlenmeyer Shake Flask, PETG, flat bottom w / vented screw cap, sterile, indiv wrapped, 1000mL, 6/cs
• Vented screw caps • Flat or baffled bottoms • Gamma sterile (SAL 10-6) • Pyrogen free and RNase/DNase free • Individually wrapped Erlenmeyer Shaker Flasks are made of polycarbonate, PETG or styrene/butadiene (Jumbo Flasks only). The polypropylene screw caps are vented with 0.2µm membranes to increase air transmission and enhance cell growth. The mouth size conforms with the international SBS standard, for quick, secure connection to bioreactor equipment.Polycarbonate flasks and Jumbo Fernbach flasks have baffled (ribbed) bottoms to provide increased oxygenation and mixing efficiency even at lower shaking speeds. All flasks, regardless of size, are individually wrapped and gamma sterilized to SAL 10-6, and they are free of RNase, DNase, pyrogen, endotoxins and human DNA. Polycarbonate Flasks are autoclavable at 121°C and 15PSI for 30 minutes.
Alkali Scientific Erlenmeyer Shake Flask, PETG, flat bottom w / vented screw cap, sterile, indiv wrapped, 500mL, 12/cs
• Vented screw caps • Flat or baffled bottoms • Gamma sterile (SAL 10-6) • Pyrogen free and RNase/DNase free • Individually wrapped Erlenmeyer Shaker Flasks are made of polycarbonate, PETG or styrene/butadiene (Jumbo Flasks only). The polypropylene screw caps are vented with 0.2µm membranes to increase air transmission and enhance cell growth. The mouth size conforms with the international SBS standard, for quick, secure connection to bioreactor equipment.Polycarbonate flasks and Jumbo Fernbach flasks have baffled (ribbed) bottoms to provide increased oxygenation and mixing efficiency even at lower shaking speeds. All flasks, regardless of size, are individually wrapped and gamma sterilized to SAL 10-6, and they are free of RNase, DNase, pyrogen, endotoxins and human DNA. Polycarbonate Flasks are autoclavable at 121°C and 15PSI for 30 minutes.
Alkali Scientific BioFactory Systems Chambers Ce
BioFactory Systems are compact multi-layer single-use cell culture systems designed for easy scale-up cell culture applications such as production of vaccines monoclonal antibodies or pharmaceuticals Theyre versatile and easy-to-use system for medium to large scale research or commercial production with reduced contamination risk Narrow mouth caps available for tubing solutions Available in five sizes 1-Chamber with 647 cm2 cell growth area 2-Chamber with 1279 cm2 cell growth area 5-Chamber with 3175 cm2 cell growth area 10-Chamber with 6320 cm2 cell growth area 40-Chamber with 25280cm2 cell growth area Made of high clarity 100% virgin polystyrene Sterilized by E-beam SAL10-6 Non-Pyrogenic DNase/Rnase free Individually packaged in double-layer sterile bags TC treated good for cell attachment and growth Clear lot number for batch traceability Ultrasonic welding without extrinsic ingredients Excellent welding line design can avoid producing particles during welding and make t
Alkali Scientific BioFactory Systems Chambers Ce
BioFactory Systems are compact multi-layer single-use cell culture systems designed for easy scale-up cell culture applications such as production of vaccines monoclonal antibodies or pharmaceuticals Theyre versatile and easy-to-use system for medium to large scale research or commercial production with reduced contamination risk Narrow mouth caps available for tubing solutions Available in five sizes 1-Chamber with 647 cm2 cell growth area 2-Chamber with 1279 cm2 cell growth area 5-Chamber with 3175 cm2 cell growth area 10-Chamber with 6335 cm2 cell growth area 40-Chamber with 25295 cm2 cell growth area Made of high clarity 100% virgin polystyrene Sterilized by E-beam SAL10-6 Non-Pyrogenic DNase/Rnase free Individually packaged in double-layer sterile bags TC treated good for cell attachment and growth Clear lot number for batch traceability Ultrasonic welding without extrinsic ingredients Excellent welding line design can avoid producing particles during welding and make