Pump Plunger Assemblies
AVANTOR MASTERFLEX (VWR LLC) Masterflex Cable Assembly for Remote Control, 18-pin Round Connector; 25 ft (7.6 m) Cable Length
Cables include noted terminal connector and cable with stripped wire ends for connection to PLC or other control interface.
Chemglass Life Sciences Chemglass 31 mm Rotary Bearing Rebuild Kit for Mechanical Seal Stir Bearings
This 31 mm rotary bearing rebuild kit is a replacement repair kit designed to service Chemglass mechanical seal stir bearings. The kit supplies the internal bearing components required to refurbish a 31 mm rotary bearing assembly; tools and lubricant are sold separately.
- Size: 31 mm
- Includes bearing seal, ball bearings, and needle roller bearings
- Used to repair 31 mm mechanical seal stir bearings
- Does not include tools
- Requires a small amount of specialty lubricant, sold separately
Accuflow Systems Quattroflow Pump Chamber, Single-Use, Polypropylene, 3/4 in TC
The Quattroflow QF1200 single-use pump chamber is a disposable, product-wetted assembly designed for biopharmaceutical diaphragm pumps where rapid changeover and elimination of cleaning validation are required.
- Single-use polypropylene pump chamber suitable for bioprocessing.
- Standard connections: 3/4 in Tri-Clamp (3/4 in TC) inline inlet and outlet.
- Gamma sterilizable up to 50 kGy for sterile single-use workflows.
- Product-wetted materials: pump chamber and valve plate polypropylene, diaphragms TPE, valves and O-rings EPDM.
- Easy replacement; typically supplied as replacement sets of three chambers to support quick changeover.
AVANTOR MASTERFLEX (VWR LLC) Kobold PSR-5115 Flow Switch, Brass 1.3-2.1/1.0-2.0 GPM Increase/Decrease
The device operates as follows: The flowing medium presses against the paddle for the flow switch. The paddle is fitted to one end of a balance arm which is in direct contact with a prestressed leaf spring. At the other end of the balance arm is a permanent magnet. This magnet actuates a reed contact located within a moveable housing outside the media. The reed contact switches on or off depending on the position of the permanent magnet and the switch housing. The status of the switch may then be used to electrically control the fluid flow. The moveable reed switch on the unit allows the contacts to be set either normally open (N/O) or normally closed (N/C). FEATURES
- Switch point adjustable
- Easy to install
- Brass or SS construction
- Maximum pressure: 1450/3600 PSI
Perkin Elmer US LLC Magazine for Liquid Sample Sealer
The Liquid Sample Sealer is used to seal volatile, non-viscous, non-corrosive samples in either the 4 µL aluminum capsules (02400642) or 30 µL aluminum capsules (00090709).
Grainger Black Pipe Nipple Threaded 1x5 In
The Grainger 14J808 is a 14-inch diameter, 8-inch deep plastic pail with a bail handle and a tight-fitting lid. It has a capacity of 5 gallons and is made from high density polyethylene in natural white color. The pail has graduations on the side for measuring contents. It can be used for a variety of applications including mixing, storing, and transporting viscous materials, liquids, powders, pellets, and small parts. The pail is chemical and corrosion resistant. It meets FDA requirements for food contact.
Grainger Black Pipe Nipple Threaded 2x4 In
The Grainger 14J820 is a 14-inch diameter, 8-inch wide, 20-inch high plastic trash can with a 20 gallon capacity. It is made from high density polyethylene and has a rigid snap-on dome lid. The trash can is gray in color and features a classic tapered shape. It has molded handles for easy lifting and transport. This commercial trash can is ideal for use in offices, schools, restaurants and other facilities. It provides an efficient and tidy solution for collecting and containing waste. With its durable construction, the 14J820 trash can promises reliable performance and long service life.
Grainger Black Pipe Nipple Threaded 3/4x5 In
The Grainger Approved 1/2 in. Black Iron Pipe Nipple is made from malleable iron and has National Pipe Thread ends. It is 6 in. long and can be used to extend and connect black iron piping. This nipple meets ASME B16.3 specifications and is rated to 300 psi WOG at ambient temperatures. It features a black finish to resist rust and corrosion. The nipple's iron construction provides durability while its short length allows for convenient installations. This product enables users to make secure threaded black iron pipe connections.
Grainger Black Pipe Nipple Threaded 1/2x2 In
The Grainger Approved Black Pipe Nipple is made from carbon steel and has National Pipe Thread ends. It is available in sizes ranging from 1/8 inch to 2 inches diameter, and lengths from 1 inch to 12 inches. The nipple has a working pressure of 850 PSI at 70°F. It conforms to ASTM A733 and is for use in general purpose air, water, oil, natural gas and steam applications. The nipple is zinc coated for corrosion resistance.