Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
Accuflow Systems Altafluor 100 PTFE (polytetrafluoroethylene) - 100 PTFE 4MM X 6MM - 25 FT
Altafluor 100 PTFE was the original TEFLON material developed by E.I.DUPONT CO. PTFE is the most flexiible of all fluoropolymers offered. It has the broadest temperature range of any fluoropolymer and can resist highly corrosive liquids and gases even at elevated temperatures. The smooth surface finish and lowest coefficient of friction and lubricity make it ideal for bushing or bearing applications. Non-flammable. Non-toxic. FDA compliant -21 CFR 177.1550. Very low permeability. Altafluor 100 is compatible with most standard fittings (not suitable for use with flare-type fittings). Applications include use in laboratories, chemical processes, analytical and process equipment, crogenic, electrical, high temp and automotive. Manufactured from 100% virgin grade PTFE resins, it is the most flexible, is chemically inert and resistant to nearly all industrial chemicals and solvents.
MSC Albion Caster Wheel, Phenolic, 12 in. Dia, 3 in. Wide, 1-1/4 in. Axle
The Albion Caster Wheel is designed for various industrial and commercial applications, providing reliable mobility. Featuring a durable phenolic construction, this wheel is engineered for smooth operation and long-lasting performance.
- Phenolic wheel material for durability
- Plastic wheel core material
- Black wheel color
- 12 in. diameter
- 3 in. width
- 1-1/4 in. axle size
- Equipped with a roller bearing for smooth movement
- Non-marking design protects floors
- Operates effectively in temperatures ranging from -65°F to 250°F
- Manufactured in the United States
AVANTOR MASTERFLEX (VWR LLC) Dow Corning Pharma-80 Tubing, 1/4"" (6.4) x 1/2"" (12.8), 50-ft pk
Applications: Pharmaceutical, biotechnology, and ultra-pure fluid processing. Characteristics: Semi-transparent platinum-cured silicone tubing with a very low extractable profile; it contains no phthalates, plasticizers, latex or other organic additives. Pharma tubing is hydrophobic, and remains flexible and resilient for long service life. Dow Corning maintains complete traceability from silicone to silicone tubing. Durometer, shore A rating of 75. Certification: Elastomer exceeds test guidelines for USP Class VI Plastics; tubing itself is FDA compliant, and meets 3A Sanitary Standards and European Pharmacopoeia (EP) Requirements. Pharma tubing is produced under Bulk Pharmaceutical (BP) current GMP principals. <
Chemglass Life Sciences 1/8" to 1/2" PFA Compression Fitting
1/8" to 1/2" PFA Compression Fitting. Designed for use with our CG-1975 heavy wall PTFE tubing. Fittings are made entirely of chemically inert corrosion resistant PFA PTFE. Sizes and configurations other than those listed are available.
Accuflow Systems Saint-Gobain Tygon Medical Tubing, Microbore, Non-DEHP, 0.050 in ID
Tygon ND 100-80 medical microbore tubing is a clear, non-DEHP thermoplastic tubing designed for precise small-diameter fluid transfer in medical and laboratory systems. The tubing balances flexibility and dimensional stability for use in infusion lines, catheters, and microfluidic assemblies.
- Inner diameter: 0.050 in (1.27 mm).
- Outer diameter: 0.090 in (2.29 mm).
- Wall thickness: 0.020 in (0.51 mm).
- Length per package: 500 ft.
- Material: non-DEHP thermoplastic (TOTM plasticizer) for reduced phthalate migration.
- Suitable for catheter tubing, intravenous/intra-arterial infusion, cannulas, and protective sheaths.
- Can be thermoformed and flared for fabrication into cannulas and sheaths.
AVANTOR MASTERFLEX (VWR LLC) Masterflex B/T PerfectPosition™ Pump Tubing, PharmaPure, B/T 91; 10 ft
Tubing Mflex Pharmapur #91 10'
Hach Company Hach Flare Flow Cell Carrier Line, 35 cm - replacement carrier line for Lachat flow cell assemblies
The Hach Flare Flow Cell Carrier Line (35 cm) is a replacement carrier line used with flow cell assemblies in flow injection analysis equipment. It provides the specified 35 cm length carrier line for positioning a flow cell within the analysis path.
- 35 cm length.
- Flow cell carrier line for flow cell assemblies.
- Replacement part for flow injection analysis systems.
- Provides a consistent carrier length for repeatable positioning of the flow cell.
Sklar Instruments Wire Puller Sklar Microscopy Surgical 1/EA
Wire Puller Sklar Microscopy Surgical 1/EA
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Flexible Vinyl, 3/8"" ID x 9/16"" OD; 100 ft
The tubing is ideal for general-purpose lab use. Characteristics include fair chemical and abrasion resistance, odorless, nontoxic, and transparent. Tubing is manufactured according to GMP and has a temperature range of -45 to 180¿F (-43 to 82¿C). Can be sterilized with Ethylene oxide.
AVANTOR MASTERFLEX (VWR LLC) PUMP TUBING,3-STOP,0.51MM ID,6
Masterflex¿ Ismatec¿ Pump Tubing, 3-Stop, Peroxide-Cured Silicone 0.51 mm ID; 6/pk
MSC Simpson Pressure Washer Hose, 4500 psi, 100 ft, 1 ea
This 2-piece pressure washer hose is designed for high-pressure applications with cold water gas pressure washers. It features a robust polyurethane construction for durability and an extended reach for various cleaning tasks.
- Designed for use with cold water gas pressure washers
- Material: polyurethane
- Overall length: 100 ft
- Maximum pressure: 4,500 psi
- Connection types: female and male NPT
MSC ProTeam Static-Dissipating Hose, 1.5 in, 48 in, Cuffed, 1 ea
This static-dissipating hose is a replacement accessory designed for ProTeam backpack vacuums. It features static-dissipating construction to prevent static charge buildup and measures 1.5 in. in diameter by 48 in. in length, complete with pre-fitted cuffs on both ends.
- Reduces static charge buildup, ideal for environments with sensitive electronics or flammable materials
- Equipped with cuffs on both ends for secure attachment to vacuum body and wand connection
- Compatible with various backpack vacuum models, including GoFit 3, GoFit 10, and GoFree Flex Pro II
Braintree Scientific MICRORENATHANE TUBING 100FT/RL
In our opinion, Micro-Renathane is the most blood compatible tubing ever made. For implantation studies in experimental animals this tubing offers extended catheter life and reduces the probability of intravascular thrombosis. **Sold for research purposes only and not for human use**