Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Polyimide, 0.0360"" ID x 0.0400"" OD, 12""L; 5/PK
The tubing is ideal for use as an electrical and thermal insulator, for fluid and gas delivery, or as a tough sheath for glass fibers. It offers excellent chemical, heat, radiation, and abrasion resistance and high dielectric strength. Resin meets USP Class VI requirements and NEMA standards. The tube has a temperature range of -418 to 896¿F (¿250 to 480¿C). Can be sterilized with autoclave, ethylene oxide or gamma irradiation.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Polyimide, 0.0195"" ID x 0.0215"" OD, 12""L; 5/PK
The tubing is ideal for use as an electrical and thermal insulator, for fluid and gas delivery, or as a tough sheath for glass fibers. It offers excellent chemical, heat, radiation, and abrasion resistance and high dielectric strength. Resin meets USP Class VI requirements and NEMA standards. The tube has a temperature range of -418 to 896¿F (¿250 to 480¿C). Can be sterilized with autoclave, ethylene oxide or gamma irradiation.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Flexible Vinyl, 3/16"" ID x 5/16"" OD; 50 ft
The tubing is ideal for general-purpose lab use. Characteristics include fair chemical and abrasion resistance, odorless, nontoxic, and transparent. Tubing is manufactured according to GMP and has a temperature range of -45 to 180¿F (-43 to 82¿C). Can be sterilized with Ethylene oxide.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Platinum-Cured Silicone, 5/16"" ID x 9/16"" OD; 25 ft
Applications: Pharmaceutical, biotechnology, aerospace, food and beverage, and general lab applications. Characteristics: Platinum-cured, excellent heat resistance, low compression set, odorless, nontoxic, translucent. Certification: Elastomer is FDA-compliant (21 CFR 177.2600) and meets USP Class VI; exceeds 3A Sanitary Standards. Tubing is manufactured according to GMP. Temperature range: -58 to 446¿F (-50 to 230¿C) Sterilize: Autoclave or gamma irradiation.
Metrohm USA TEFLON TUBE
For M8 threaded holes. For 6.1602.1XX bottle attachments and 6.1608.0XX bottles
Chemglass Life Sciences FEP Tubing; 1/4" OD x 1/8" ID x 10ft Long
FEP Tubing; 1/4" OD x 1/8" ID x 10ft Long. EP heavy wall tubing for use with Chemglass process reactors. Used to connect components having 1/4", 1/2", or 3/4"OD glass connections.
Chemglass Life Sciences Tubing, PTFE (FEP), 0.063in ID x 0.125in OD, 10' Lgth
Tubing, PTFE (FEP), 0.063in ID x 0.125in OD, 10' Lgth. Chemically inert and suitable for low pressure applications, FEP tubing is recommended for all connections in the high performance, low pressure liquid chromatography system. The tubing is extruded with an outer diameter tolerance of +/- .001in. The 1/8in tubing can withstand pressure up to 500 psi. SUPPLIED IN LENGTHS OF 10 FEET.
Accuflow Systems Versilon FEP Tubing, 1/4 in ID, 3/8 OD, 50 ft
Unreinforced FEP tubing with a 1/4 in inner diameter, 3/8 in outer diameter, and 0.062 in wall thickness supplied as a 50 ft spool. The fluorinated ethylene propylene construction delivers excellent chemical resistance, low permeability, and thermal stability for laboratory, pharmaceutical, and semiconductor fluid-transfer applications.
- Clear, flexible FEP material with high chemical resistance.
- Inner diameter 1/4 in (6.35 mm), outer diameter 3/8 in (9.53 mm), wall 0.062 in (1.57 mm).
- Supplied as a 50 ft packaged length for continuous runs or custom cut-to-length.
- Low permeability and inert surface suitable for analytical and bioprocess fluids.
- Compatible with a wide range of solvents, acids, and bases.
- Typical uses include laboratory fluid transfer, pharmaceutical processing, and semiconductor applications.
Accuflow Systems Saint-Gobain Sanitary Silicone Tubing, 5/16 in ID, 1/2 in OD
Saint-Gobain Tygon SPT-3350 sanitary silicone tubing provides an ultra-smooth inner bore designed to reduce particle entrapment and simplify cleaning for hygienic food and beverage dispensing and sanitary fluid transfer.
- Ultra-smooth inner bore reduces particle entrapment and eases sanitation.
- Platinum-cured silicone for flexibility and thermal stability.
- 5/16 in ID, 1/2 in OD, 3/32 in wall, 50 ft per pack.
- Wide operating temperature range: -112 °F to 400 °F (-80 °C to 204 °C).
- 50 Shore A durometer provides resilient, flexible performance.
- Suitable for food and beverage dispensing and sanitary fluid transfer.
Teledyne ISCO, Inc 3/8" ID x 25' PTFE suction line with protective coating, without strainer
3/8" ID x 25' PTFE suction line with protective coating, without strainer
Accuflow Systems Saint-Gobain C-Flex Tubing, 3/8 in ID, 5/8 OD, 50 ft
C-Flex 374 thermoplastic elastomer (TPE) tubing, sized 3/8 in ID x 5/8 in OD in a 50 ft coil, is engineered for bioprocess and laboratory fluid transfer. The formulation is pharmaceutical-grade, sealable and weldable pre- or post-sterilization, and compatible with gamma, x-ray, and autoclave sterilization. It remains flexible across a wide temperature range and meets USP Class VI and relevant ISO standards.
- Pharmaceutical-grade thermoplastic elastomer for bioprocess compatibility.
- Sealable and weldable for aseptic welding connections and sealing disconnections.
- Sterilizable by gamma irradiation, x-ray irradiation, and autoclave.
- Flexible from -45°C to 135°C (-50°F to 275°F).
- Meets USP Class VI and relevant ISO standards.
- Available in 50 ft coils for continuous runs and assemblies.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Platinum-Cured Silicone, 1/4"" ID x 1/2"" OD; 25 ft
Applications: Pharmaceutical, biotechnology, aerospace, food and beverage, and general lab applications. Characteristics: Platinum-cured, excellent heat resistance, low compression set, odorless, nontoxic, translucent. Certification: Elastomer is FDA-compliant (21 CFR 177.2600) and meets USP Class VI; exceeds 3A Sanitary Standards. Tubing is manufactured according to GMP. Temperature range: -58 to 446¿F (-50 to 230¿C) Sterilize: Autoclave or gamma irradiation.
Qosina Corp Tygon® ND-100-80 Tubing, 80A Durometer; 0.02 inch ID; 0.06 inch OD (0.51 mm x 1.52 mm) x 500 ft coil (152.4 m)
80A Durometer; 0.02 inch ID; 0.06 inch OD (0.51 mm x 1.52 mm) x 500 ft coil (152.4 m)
AVANTOR MASTERFLEX (VWR LLC) E-3603 Non-DEHP Lab Tubing, 1/8"" ID x 1/4"" OD; 50 ft/Pk
E-3603 Non-DEHP Lab Tubing, 1/8" ID x 1/4" OD; 50 ft/PkFormulation: Tygon E-3603Applications: General laboratory, food and beverage, biopharmaceutical, analytical instruments.Characteristics: Non-DEHP, phthalate free. Long life, chemical resistant, nonoxidizing; able to bend to sharp radius curves and easily works with fittings. Transparent.Certifications: FDA compliant; meets USP Class VI and NSF 51 requirements.Temperature range: ¿51 to 165¿F (¿46 to 74¿C)Sterilize: Autoclave or ethylene oxide.