Tubing Connectors and Fittings
Ace Glass, Inc. 10/10 outer joint with 15-415 thread, 20mm OD, 17.5mm ID
10/10 JOINT 15-415 20MM (GLASSBLOWER)
Chemglass Life Sciences Adapter, Distilling/Splitting, 24/40, 0-4mm Valve, 1/2" Compression Fitting, Process Reactor
Adapter, Distilling/Splitting, 24/40, 0-4mm Valve, 1/2" Compression Fitting, Process Reactor. Compact and simple distilling/splitter adapter for use with Chemglass process reactors. Vapor flows upward freely through the large vapors holes to the condenser. Distillate flow is directed using the valve to either the receiving flask or back to the reactor. Control valve is either a 0-4mm or a 0-12mm PTFE with a 1/2¿ or 3/4¿ OD distillate takeoff for use with CG-1975 compression fittings and TFE tubing. Plugs are supplied complete with CG-309 Perfluoro o-rings.
International Medical Industries (IMI) Luer Connector (Female - Female Luer Lock) (Individual Blisters)
Prep-Fill™ Female - Female Luer Lock Connector provides convenient, economical, high-quality solutions to facilitate transferring or mixing of fluids between drug delivery devices or IV sets. •Packaged Sterile •Non-Pryogenic •Individual Blister
AVANTOR MASTERFLEX (VWR LLC) Push-to-connect straight unions, polypropylene, 1/4"", 10/pk
Push-to-connect fittings offer secure connections and quick disconnection. Simply push tubing past the O-ring to the internal tube stop-steel teeth on the collet grip tubing for leakproof connections. To disconnect, press collet against fitting body to disengage steel teeth-tubing slides right out.
New Jersey Fluid Systems LLC RND HANDLE NEEDLE VALVE
316 Stainless Steel Swagelok Integral Bonnet Needle Valve. Forged Body. 5,000 psi @ 100F; -65F to 450F Regulating Stem. PFA Packing 1/4 in. OD Swagelok Tube Fitting ends.
Chemglass Life Sciences Adapter, Inlet, 24/40 Outer Joint, 2mm Glass Stpk, Airfree, Schlenk
Adapter, Inlet, 24/40 Outer Joint, 2mm Glass Stpk, Airfree, Schlenk. Gas inlet adapter with a 2mm glass stopcock having a constant pressure retention device. Available with a choice of inner or outer standard taper joint. Top arm is 9mm O.D. medium wall tubing for use with CG-3022 septum. Overall height of the 14/20 size is approx. 95mm while the 24/40 is approx. 120mm.
Chemglass Life Sciences Adapter, Solid Addition, Merlic, 24/40 Joint Size, Airfree, Schlenk
Adapter, Solid Addition, Merlic, 24/40 Joint Size, Airfree, Schlenk. Adapter permits addition of solids into multi-neck flasks in a dry box, or addition of non-air sensitive compounds into flasks while purging with an inert atmosphere. Can handle from 50mg to 1 gram of solids and is made with a drip tube to avoid getting the solids on the joint or the wall of the flask.** Design Suggested By Dr. Craig Merlic, University Of California, Los Angeles, CA
Chemglass Life Sciences Adapter, Connecting, Airfree, Schlenk, (1) 14/20 Outer Joint, (2) 14/20 Inner Joints
Adapter, Connecting, Airfree, Schlenk, (1) 14/20 Outer Joint, (2) 14/20 Inner Joints. A 3-way adapter for the connection of 3 vessels. With a top outer and two lower inner joints, all being the same size.
Ace Glass, Inc. PTFE 3/8" male NPT to 3/8" male NPT straight connector.
PTFE 3/8" male NPT to 3/8" male NPT straight connector.
Chemglass Life Sciences Adapter, Connecting, Inlet, Airfree, Schlenk, 0-8mm Valve
Adapter, Connecting, Inlet, Airfree, Schlenk, 0-8mm Valve. Similar to the AF-0072 adapter, but with two #15 o-ring joints. Available in 0-4mm, 0-8mm or 0-12mm valve sizes. Each adapter is supplied complete with (2) #116 Viton o-rings.
Chemglass Life Sciences Adapter, Complete, Thermocouple Gauge, Airfree, Stainless Steel Bushing, #30 O-Ring Jt
Adapter, Complete, Thermocouple Gauge, Airfree, Stainless Steel Bushing, #30 O-Ring Jt. A 0-12mm Chem-Vac™ Chem-Cap valve having an o-ring joint for connection to the right hand side of AF-0300-03 vacuum manifold. Adapter is available for #15, #25, and #30 o-ring joints. Complete gauge consists of a glass portion, a Stainless Steel bushing drilled and tapped for 1/8 NPT permitting direct connection to gauge tube, and an open top GL-25 screw cap.
Chemglass Life Sciences Adapter, Flushing, 14/20 Inner Joint, 4mm Glass Stpk, Airfree, Schlenk
Adapter, Flushing, 14/20 Inner Joint, 4mm Glass Stpk, Airfree, Schlenk. Adapter allows vessels to be flushed with inert gas while sampling directly thru the bore of the T-Bore stopcock. Available with a choice of a 4mm high vacuum glass stopcock having a Stainless Steel constant pressure retention device or a 4mm PTFE stopcock. Both the glass and PTFE stopcock have 9mm OD medium wall arms for use with CG-3022-05 red or CG-3022-22 white septum stopper. PLEASE NOTE: NOT SUPPLIED WITH SEPTUM STOPPER.