Tubing Connectors and Fittings
New Jersey Fluid Systems LLC Swagelok Hose Connector, 316 Stainless Steel
316 Stainless Steel Swagelok Hose Connector x Pipe Thread Adapter. 3/8 in. Hose Barb x 1/2 in. Male NPT
MSC SMC PNEUMATICS KQ2T06-00A 6mm OD, Brass/Polybutylene Push-to-Connect Union Tee 145 Max psi
SMC PNEUMATICS KQ2T06-00A 6mm OD, Brass/Polybutylene Push-to-Connect Union Tee 145 Max psi
Grainger 90 Elbow Union 3/4 in CTS PEX White
The Grainger 16T735 is a 16 ton hydraulic bottle jack made of steel with a lifting range of 10-15/16 inches to 16-1/2 inches. It has a built-in overload valve and bypass device and meets ASME PALD standards. The jack has a weight capacity of 32,000 pounds and a saddle diameter of 5-1/8 inches. It is designed for use in the automotive industry for lifting vehicles, machinery, dies, molds and more. The jack is shipped individually and covered by a 12 month warranty.
Grainger Connector 3/4 CTS x 3/4 NPT White
The Grainger Approved 3/4" CTS x 3/4" NPT Brass Connector is made of brass and has a maximum pressure rating of 600 PSI at 70°F. It connects copper tubing to threaded pipe and can be used for air, water, oil, natural gas, and steam applications. The connector has a hex nut for tightening and is NSF/ANSI 61 certified for potable water service. It meets ASME B1.20.1 standards and is manufactured in the USA. The connector comes with a limited lifetime warranty.
Grainger Crimp Fitting 45 Deg 1/2 ID 1/2 FBSPP
The Grainger 16P789 is a 16-ounce can of Rust-Oleum Stops Rust Protective Enamel spray paint in Gloss Black color. This oil-based paint provides a durable protective coating that resists corrosion, fading, chipping, and abrasion. It features a comfort spray tip for reduced fatigue and finger strain during application. The paint can cover up to 15 sq ft and dries to the touch in 2 hours or fully cures in 24 hours at 70°F and 50% humidity. It bonds to metal, wood, concrete and more. This enamel spray paint is ideal for DIY, automotive, industrial, marine and other projects requiring a glossy black finish.
AVANTOR MASTERFLEX (VWR LLC) CPC (Colder) SQCC221212M Quick-disconnect insert, stainless steel, 3/4"" sanitary connector
These couplings allow you to integrate disposables with your existing stainless steel processing equipment. Both couplings and inserts are available with standard sanitary terminations to attach to your system with a sanitary gasket and tri-clover clamps. Choose from stainless steel or polysulfone inserts to mate to polysulfone bodies. All models feature USP Class VI platinum-cured silicone gaskets. Mix and match these bodies and inserts with the polysulfone quick-disconnect coupling elements on page 509 for greater flexibility in your process system.
Grainger Union Elbow 1/2 in PK10
The Parker 16W611 Union Elbow is a composite union elbow fitting for use in fluid power systems. It has a maximum pressure rating of 3000 psi and temperature range of -40°F to 250°F. The elbow has a 1/4" NPT female thread on both ends and is made of glass reinforced nylon composite material. This lightweight elbow provides corrosion resistance and has vibration damping properties. With its 360 degree orientation, it allows flexibility in installation. The elbow dimensions are 1-1/4" x 1-3/4" x 1-1/4". This composite elbow by Parker is designed for use in pneumatic applications.
Chemglass Life Sciences 24/40 Outer Joint, 28mm X 2.0W Tubing
24/40 Outer Joint, 28mm X 2.0W Tubing. Standard taper outer joint tooled on tubing approximately the same diameter as the top reinforcing ring, affording no hold-up below joint.
MSC PEC Tools Steel Rule, 6 inch, 4R, Rigid, Satin Chrome-Plated
This rigid steel rule is made from the finest quality steel, fully hardened and tempered for durability. It features a baked-on satin chrome finish for enhanced readability and corrosion prevention. The precision photo etched and black-filled graduations ensure accurate measurements.
- Made from finest quality steel
- Fully hardened and tempered for durability
- Precisely etched and black-filled graduations for readability
- Satin chrome finish for easy readability and corrosion prevention
- Rigid construction
- Six inch length
- 4R graduations
- Both long edges ground flat and straight
- Made in USA
MSC Value Collection Aircraft Cable, 3/16 x 1/8 in diameter, 7x19 strand core, Vinyl coated, 2,000 Lb breaking strength
This aircraft cable features a 3/16 x 1/8 inch diameter, a 7x19 strand core, and a vinyl coating, offering a breaking strength of 2,000 Lb. It is galvanized for added durability and provides a cost-effective solution for various business needs.
- Features a 3/16 inch coated diameter and 1/8 inch bare diameter.
- Equipped with a 7x19 strand core for flexibility and strength.
- Vinyl coating provides protection and extends product life.
- Offers a breaking strength of 2,000 Lb for demanding applications.
- Galvanized finish enhances durability and corrosion resistance.
- Provides a high-quality, cost-effective solution for industrial requirements.
MSC Value Collection Connecting Link, Stainless Steel, ANSI #60, Single Strand Chain
Value Collection connecting links are designed for use with stainless steel single strand chains, conforming to ANSI #60 standards. They provide a reliable solution for connecting chain segments in various applications requiring robust and corrosion-resistant components.
- Constructed from stainless steel for enhanced durability and corrosion resistance.
- Specifically designed for single strand chain applications.
- Conforms to ANSI #60 specifications for compatibility.
- Provides a secure and reliable connection for chain segments.