Liquid Chromatography Instruments
Cole-Parmer VapLock™ Waste Funnel, 4" dia., Justrite Centura, SS / PTFE quick disconnect, HDPE; 1/ea
Use these 4" diameter funnels to safely dispose of liquid laboratory waste. A locking hinged lid minimizes leaks and spills when the funnel is closed. Quick-disconnect fitting on models 12020-64 and -65 allows fast and easy connection to Justrite Centura safety containers. Funnels are constructed of high-density polyethylene (HDPE) and polypropylene (PP) with a Viton gasket.
Bellco Glass, Inc. 2-P Stainless Steel Sparger Assembly , 8-15L STD Over Head Drive Vessels - Air Stone
2-Port Air Stone Stainless Steel Sparger Assembly is designed for the sparging of gases into the vessel liquid media. This design allows access through the side arms with a screw on cap assembly. Fully autoclavable. MADE IN THE USA. Specifications:Sparger Assembly For 6L L/P OHD VesselFits Thru 45mm Sidearm316L SST Sparger Tube Is 15″ Long With 12mm Glass Frit. Course Porosity 40-60 Microns32 Ra Material Finish Or Better
Bellco Glass, Inc. Pressure Relief Valve Pkg of 6
Pressure Rating: 3 PSIG•OAD (LxOD): 1.795” x 0.745”•¼” Connections•Construction Material: Polypropylene•Autoclavable at up to 120 Degrees C for 100 15-minute cyclesMATERIAL: WHITE POLYPROPLENE HOUSING WITH HOSE BARB CONNECTIONS.The pressure relief valve is a cartridge check valve incorporating an innovativeGuided poppet design. This valve is the heart of the system & may be used aloneOr as the central component of the system. The valve has low pressure drop.Description: relief valves are used to prevent flow of fluid (gas or liquid)In one direction & allow flow in the other direction.The material is BASF ultraform, an acetal co-polymer as standard resinBecause of its strength & chemical resistance. The poppet is made ofStantoprene from advanced elastomer systems, and has a similar chemicalResistance to EPDM.
Bellco Glass, Inc. 3-Port Sparger Assembly W/Frit,15L For Vertical Side Arm Vessels
316-l stainless steel ra32 or better finish10 micron porosity stainless steel frit for low profile vertical side arm vessels. MADE IN THE USA. Frit is removable for cleaning. Comes with 45mm blue polypropylene open top cap and silicone gasketTriple tube configuration With Vent, Fill/Sample And Sparge.
Teledyne ISCO, Inc Stainless Steel Check Valve Kit. Requires 2 For Dual Pumps
Stainless Steel Check Valve Kit. Requires 2 for dual pumps
IDEX Health & Science Upchurch CHECK VALVE CV-3315
- Type: Inlet check valve
- Manufacturer status: Obsolete
- Cracking pressure: 3 psi (0.2 bar)
- Maximum pressure rating: 2000 psi (138 bar)
- Swept volume: 16 µL
- Thread port configuration: 1/4-28 flat-bottom male to 1/4-28 flat-bottom female
- Orifice ID: 0.020 in
- Body materials: PEEK, PCTFE, perfluoroelastomer, PTFE, gold-plated stainless steel
- Chemical resistance: Excellent
- Sealing system: Spring-actuated
- Application: Back-flow protection for 1/4-28 flat-bottom ports
Waters Corp Waters Tubing Assembly, Primary Out Transducer to Check Valve, MP35N
Waters Tubing Assembly, Primary Out Transducer to Check Valve, MP35N
Bellco Glass, Inc. Compression Fitting Assembly , 1/8 For 10mm Port
Bellco compression fittings are designed using our standard 45mm blue polypropylene open top caps and white silicone gaskets. A wide variety of fittings are available to allow pH and OD monitoring via insertion of these probes into sidearms or vessels. Bellco probe adapters are designed to allow introduction of threaded probes into vessels through 200mm stainless steel or a 45mm vertical sidearm.. MADE IN THE USA
THERMO SCI 3P AIG PARTS & ACCESSORIES CAPILLARY MXR 25UL HPG LPG DPG
NC2456671 CAPILLARY MXR 25UL HPG LPG DPG
Bellco Glass, Inc. Compression Fitting Assembly , 1/4
316L stainless steel compression fitting for use with 1/4" tubes. Useful for addition and withdrawal of contents from bioreactor vessel. Can fit 10mm port on 3L and 7L metric bioreactors.. MADE IN THE USA
Vici Metronics MG2 MILLIGAT HFPUMP W/ STEPPER
milliGAT HF pump with stepper motor,controller, communication cable, and 24VDCpower supplyHTS: 8413600040
Sciencix TUNGSTEN LAMP 1000HR
oem#:g1103-60001,compatiable models:G1315A/B, G1315C/D, G1365A/B, G1365C/D and 8453A