Individual HPLC Components and Accessories
Waters Corp Tubing Kit, CH-30A, Stainless Steel
Waters Corporation Tubing Kit, CH-30A, Stainless Steel
Waters Corp Flow Injection Analysis Device, 85 μm, 50 mm
The product is an iKey Flow Injection Analysis Device, with an inner diameter of 85 μm and a length of 50 mm. It is designed for direct sample injection, bypassing chromatographic separation.
- Allows for direct sample injection from the sample manager to the emitter.
- Bypasses chromatographic separation.
- Features an inner diameter of 85 μm.
- Has a length of 50 mm.
- Functions as a utility device.
- Suitable for nano/micro systems.
Waters Corp RADIAN ASAP Direct Mass Detector, Single Quadrupole, Integrated ASAP Source
The RADIAN ASAP Direct Mass Detector is a dedicated direct analysis system for rapid, easy, and low-cost liquid and solid analysis. It uses single quadrupole mass spectrometry with an Atmospheric Pressure Solids Analysis Probe (ASAP) for quality and ease of use in a compact footprint. This enables direct MS analysis without complex sample preparation or MS experience.
- Simple operation and data interpretation
- Minimal sample preparation; no separation required
- Real-time results and classification
- Easy to learn, fully automated setup
- Direct sampling onto glass probe; minimizes solvent use
- Rapid 30-second analysis time
- Compact design
- Dedicated single quadrupole mass detector with integrated ASAP source
- Pre-optimized ASAP source for structural identification
- Automated mass calibration and resolution verification
- Programmable temperature control
Teledyne ISCO, Inc Ld Class Dual Piston Pump With Belt Drive And Shaped Cams; 0.0 - 100.0 Ml/Min.; 1,000 Psi
LD Class Dual Piston Pump with Belt Drive and Shaped Cams; 0.0 - 100.0 mL/min.; 1,000 psi; Stainless Steel Fluid Path; Automatic Piston Wash; with Pulse Dampener, Pressure & Leak Sensors; Standard Seal (stainless steel energizer); Fitting package for 1/8"""" and 1/16"""" tubing
Teledyne ISCO, Inc Pr Class Dual Piston Pump With Belt Drive And Shaped Cams; 0.00 - 300.00 Ml/Min. ; 1,000 Psi
PR Class Dual Piston Pump with Belt Drive and Shaped Cams; 0.00 - 300.00 mL/min. ; 1,000 psi; Stainless Steel Fluid Path; Automatic Piston Wash; with Pulse Dampener, Pressure & Leak Sensors; Standard Seal (stainless steel energizer); Fitting package for 1/8"""" and 1/4"""" tubing
Teledyne ISCO, Inc Ld Class Dual Piston Pump With Belt Drive And Shaped Cams; 0.0 - 100.0 Ml/Min.; 1,000 Psi
LD Class Dual Piston Pump with Belt Drive and Shaped Cams; 0.0 - 100.0 mL/min.; 1,000 psi; Hastelloy Fluid Path; Automatic Piston Wash; with Pulse Dampener, Pressure & Leak Sensors; Standard Seal (Flouropolymer energizer); Fitting package for 1/8"""" and 1/16"""" tubing
Bellco Glass, Inc. Compression Fitting Assembly , 1/8 For 10mm Port
Bellco compression fittings are designed using our standard 45mm blue polypropylene open top caps and white silicone gaskets. A wide variety of fittings are available to allow pH and OD monitoring via insertion of these probes into sidearms or vessels. Bellco probe adapters are designed to allow introduction of threaded probes into vessels through 200mm stainless steel or a 45mm vertical sidearm.. MADE IN THE USA
Waters Corp Performance Maintenance Kit, ACQUITY I-Class Binary Solvent Manager, UPLC System
The Waters™ Performance Maintenance Kit for the ACQUITY I-Class Binary Solvent Manager contains all the Waters Quality Parts™ necessary to keep your instrument operating at peak performance on an annual basis.
- Contains plungers, check valves, seals, and filters
- Designed for UPLC system type
- Compatible with H-Class system
- Recommended for annual replacement
- Includes one unit per package
Gentech Scientific Inc Refurbished Agilent 1200 Quaternary Pump
• Agilent 1200 HPLC Quaternary Pump, • 1 Year In-House Warranty. Different pumps and configurations are also available. GenTech Scientific offers installation, and extended warranty options. Please contact 585-492-1068 with questions.
Waters Corp Needle Kit, 30μL, MP35N, With Guide and Seat
This needle kit provides a replacement needle FTN-30μL MP35N with guide and seat. It is the standard needle assembly used in an Arc Bio Sample Manager-FTN.
- Standard needle assembly for Arc Bio Sample Manager-FTN
- 30μL capacity
- Constructed from MP35N material
- Includes guide and seat
- Designed for UPLC system types
- Annual replacement schedule