Chromatography Column Tools
Perkin Elmer US LLC Kalrez O-Ring Kits for Sampling Accessories
Metal Body Stainless Steel Nebulizers For most solutions containing <5% acid, providing exceptional performance and durability Excellent performance (precision and signal-to-noise ratio)
DSI LLC Tightening Tool for PEEK hex-head, 1/16" nuts, blue
Tightening Tool for PEEK hex-head, 1/16" nuts, blue
Waters Corp Waters Torx Key, T20
This Torx key is used to loosen and tighten screws.
- T20 Torx key
- Used to loosen and tighten screws
Analytical Sales & Services MµLtisleeve 4 Port Temperature Control Unit
*Self-calibrating * Plug & Play smart heater technology * Controls up to 4 column heaters simµLtaneously * 4 independent channels * Used in mµLtiplexing applications * Temperature range from 5C above ambient to 85c * Controller comes with cables, manual, and usb gui software.
Grainger Threading Tool 5/16 Carbide
The Micro 100 Threading Tool is a high-speed steel threading tool with a 5/16" shank diameter and 60 degree included angle. It has a 0.040" minimum minor diameter and can cut up to 8 threads per inch. This single-point threading tool allows both external and internal threading operations. It features TiN coating for increased tool life and lubricity. The overall length is 3-1/2". This threading tool is made in the USA by Micro 100 and can machine a variety of materials including steel, stainless steel, cast iron, aluminum, brass, bronze, plastics and more. It's a versatile threading tool well-suited for lathes, screw machines, and CNC machines.
Perkin Elmer US LLC Seal Removal Tool
Calion standards are premixed and adsorbed into a solid phase. These standards are ideal for in field use because they contain no liquids. Calion PV Mixes are used for Torion T-9 calibration, including both mass and GC retention time calibrations. The combination of Custodion SPME sampling with Calion standards provides robust and rapid capability for in-field calibration because they contain no liquids. Calion PV Mixes are used for Torion T-9 calibration, including both mass and GC retention time calibrations. The combination of Custodion SPME sampling with Calion standards provides robust and rapid capability for in-field calibration.
Waters Corp Waters Flow Splitter, 8.0–30 mL/min, 5000:1, 19 mm Column ID
This flow splitter collects fractions in AutoPurification systems with destructive detectors. It optimizes detector efficiency by diverting eluent to the detector, with the remainder passing through a delay coil to enable peak collection. Suitable for systems with fixed column sizes and flow rates.
- Flow rate range: 8–30 mL/min
- Split ratio: 5000:1
- Nominal flow rate: 20.00 mL/min
- Target column ID: 19 mm
- Split ratio accuracy: ±30% to –20% at nominal rates (with no outlet connections)
- Peak dispersion: Less than 20% on peak area at nominal flow rates
- Minimum delay time: 5 sec. at max flow rates
- Maximum backpressure: 5171 kPa (52 bar, 750 psi) at max flow rates, 25°C
- Maximum downstream pressure (Prep outlet): 1724 kPa (17 bar, 250 psi)
- Operating temperature: 4°C to 40°C
- Operating humidity: 20–80% noncondensing
Enterprise Technology Solutions Ettore Products Pickup Tool, Multipurpose, 5 lb Cap, 32" Reach, Blue/Black
Multipurpose pickup tool with a 32" reach features articulation head that turns 90 degrees. Its versatility can pick up objects high or low without bending or straining. Rustproof construction allows safe use outdoors to tackle any job from fallen leaves to debris in a pond or fountain. Sleek profile fits behind furniture, appliances, crawl spaces and more. Comfort grip reduces repetitive motion fatigue. Rubberized jaws securely hold up to 5 lb. Grip'N Grab Reach Tool is made of lightweight aluminum and plastic.
Grainger Threading Tool 3/8 Carbide
The Micro 100 3/8" Shank Threading Tool is a high speed steel threading tool with a 60 degree threading insert. It has a 3/8" shank diameter and is 5-1/2" overall length. The insert has a .040" nose radius and can cut unified thread sizes from 4-56 to 1/4-20, metric thread sizes from M1.6 to M6, and pipe thread sizes from 1/16" to 1/2". The tool comes with one DGT060204 threading insert. It is made in the USA.
Grainger Threading Tool 1/8 Carbide
The Micro 100 1/8" Shank Threading Tool is a high speed steel threading tool with a 60 degree threading insert. It has a 1/8" shank diameter and can cut unified thread sizes from 4-56 to 1/4-20 as well as metric thread sizes from M1.6 to M6. The tool comes with one DCMT 070204 threading insert and can cut a variety of materials including steel, stainless steel, cast iron, aluminum, brass, bronze, plastics and more. The threading tool has a TiN coating for increased tool life.
