Chromatography Tubing
Trajan Scientific Tubing Fused Silica FST Medical 1/EA
680 m OD x 530 m ID x 25 m length deactivated fused silica tubing
Trajan Scientific PEEK Tubing, Striped Color Coded PEEK Tubing (Blue) - 1/16" OD x .010" ID x 100FT, 6100 PSI, 420 BAR
PEEK Tubing, Striped Color Coded PEEK Tubing (Blue) - 1/16" OD x .010" ID x 100FT, 6100 PSI, 420 BAR. PEEK tubing has the strength required to withstand continuous use at HPLC pressure without swelling or bursting, and is not affected by halide salts, high strength buffers, or other aggressive mobile phases that corrode stainless steel. The polymer surface will not leach metal ions into the eluent or extract metal-sensitive components from the sample. Note however that dichloromethane, THF, and DMSO may cause swelling in PEEK, and concentrated nitric and sulphuric acid will attack PEEK.
Cole-Parmer TUBING 1/16"OD X.01"ID 5FT/PK
Idex 1531 Chromatography Tubing, Natural PEEK, 1/16" OD x 0.010" ID x 5 ft L
Waters Corp Waters Tubing, TFE, 0.149 in O.D., 0.119 in I.D., 25 ft Length
Waters™ tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.
- TFE material
- Outer diameter of 0.149 in (3.78 mm)
- Inner diameter of 0.119 in (3 mm)
- Length of 25 ft (7.6 m)
- One unit per package
- Replacement schedule: as required
Cole-Parmer Idex 1569 Chromatography Tubing, Orange PEEK, 1/32" OD x 0.020" ID x 5 ft L; 1/EA
Applications: Chromatography Characteristics: Unlike stainless steel, PEEK (polyetheretherketone) tubing is flexible and easy to cut. It provides excellent chemical resistance to both organic and inorganic solvents. Tubing withstands pressures to 5000 psi (3000 psi for model 02006-30). PEEK tubing has a very smooth internal surface, which causes less turbulence than metal tubing and improves resolution. Pack of 5-ft. Certification: None Maximum temperature: 212°F (100°C) Sterilize: With autoclave, ethylene oxide, or gamma irradiation
Waters Corp PEEK Tubing, 1/16 in. x 0.005 in., 10 m
This PEEK tubing is a Waters Quality spare part designed for use in HPLC systems.
- Made from PEEK material.
- Features a 1/16 in. outer diameter.
- Has a 0.005 in. internal diameter.
- Supplied in a 10 m length.
- Comes with 1 unit per package.
IDEX Health & Science Upchurch PTFE TUBING .030X.062X100'
Idex FEP Chromatography Tubing: 100 ft., Natural, Diameter Inner: 0.03 in., Diameter Outer: 0.06 in., 0.15 cm, FEP/PTFE, Autoclavable: Autoclavable, Overall Length: 100 ft., 30.4 m, FEP Tubing, Certifications/Compliance: ROHS
Waters Corp Waters Tubing, PEEK, 0.005 in. ID, 1/16 in. OD, 5 ft. Length
Waters™ tubing and fittings are designed to provide leak-free connections, with low dead volume, and minimal band spreading. For optimal performance, these components must be clean and designed to work together. The geometry of the ferrule and the conical port it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths, and diameters are available to provide flexibility in system setup and maintenance.
- Designed to provide leak-free connections
- Low dead volume
- Minimal band spreading
- Clean components for optimal performance
- Optimized ferrule geometry for conical port connections
- Matched tube and fitting diameters
- Available in a variety of materials, lengths, and diameters for system setup and maintenance
- Made from PEEK material
- Suitable for HPLC systems
Trajan Scientific Idex PEEK Tubing, orange 1/16"" OD X 020 mm, 6000 psi, 5 feet
PEEK Tubing, Idex, orange 1/16" OD X 020 mm, 6000 psi, 5 feet
