Chromatography Tubing
Waters Corp Waters Tubing, PEEK, 1/16 in. OD, 0.010 in. ID, 5 ft.
Waters™ tubing is engineered to provide leak-free connections with low dead volume and minimal band spreading. Optimal performance requires clean components designed to work together. This product offers flexibility for system setup and maintenance.
- Material is PEEK.
- Outer diameter is 1.6 mm (1/16 in.).
- Inner diameter is 0.25 mm (0.010 in.).
- Length is 1.5 m (5 ft.).
- Suitable for HPLC system types.
- Provides leak-free connections.
- Designed for low dead volume.
- Minimizes band spreading.
Waters Corp Tubing, 1/16 in (1.6mm) O.D. X 0.015 in (0.381 mm) I.D. X 5 ft (1.5 m) Length , PEEK
Waters tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.
Waters Corp Waters PEEK Tubing and Fitting Kit, HPLC System, PEEK
The PEEK Tubing and Fitting Kit is a product designed for HPLC systems, made from PEEK material. It is considered a spare parts kit and is intended for replacement as required.
- Twelve PEEK ferrules
- Six compression screws 10-32 long
- Six compression screws 10-32 short
- One PEEK tubing .005 in. x 1/16 in. x 60 in.
- One PEEK tubing .010 in. x 1/16 in. x 60 in.
- Twelve compression screw knobs
- Designed as a spare parts kit
- Suitable for HPLC systems
- Made from PEEK material
- Intended for replacement as required
Waters Corp Waters Tubing, PEEK, 0.005 in. ID, 1/16 in. OD, 5 ft. Length
Waters™ tubing and fittings are designed to provide leak-free connections, with low dead volume, and minimal band spreading. For optimal performance, these components must be clean and designed to work together. The geometry of the ferrule and the conical port it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths, and diameters are available to provide flexibility in system setup and maintenance.
- Designed to provide leak-free connections
- Low dead volume
- Minimal band spreading
- Clean components for optimal performance
- Optimized ferrule geometry for conical port connections
- Matched tube and fitting diameters
- Available in a variety of materials, lengths, and diameters for system setup and maintenance
- Made from PEEK material
- Suitable for HPLC systems
Waters Corporation Tubing, Stainless Steel, 1/16 in O.D., 0.009 in I.D., 10 ft
This stainless steel tubing is designed for optimal performance in laboratory settings, ensuring leak-free couplings, minimal band spreading, and low dead volume. It provides essential flexibility in system setup and maintenance, contributing to enhanced productivity in scientific applications.
- Designed for leak-free couplings, minimal band spreading, and low dead volume.
- Features consistent diameter and precise ferrule geometry.
- Offers flexibility in materials, lengths, and diameters.
- Tested and certified to maintain peak system efficiency.
- Guarantees consistent instrument operation and accurate results.
- Manufactured in an ISO-certified facility using ultra-pure chemicals.
- Each batch undergoes multiple tests for repeatable performance.
Waters Corp Waters Tubing, FEP, 6.0 mm OD, 4.0 mm ID, 1 m
Waters Tubing, FEP, 6.0 mm OD, 4.0 mm ID, 1 m
Microsolv Technology Corporation Ss Tubing Precut .040X10Cmgren
Tubing, Stainless Steel, Pre-Cut, 0.040 ID, 1/16 OD, HPLC Grade, 10cm Long. MicroSolv Brand. 1/EA.
Shimadzu Scientific Instruments PEEK Tubing, Red, 0.062" OD x 42cm precut with white ID band
Biocompatible, PEEK Tubing is optimized for use in high-pressure applications. Its distinct materials makes it inert to most solvents and gives it a smooth internal surface that improves the resolution of sample bands. This is a precision machined product for Shimadzu LCMS instruments. Laser cut and pre measured for use as the loop on the ESI probe for the LCMS-2020 and LCMS-8030/40/45/50/60. It has a white ID band to allow users to quickly identify the unique product. Color; Red with white ID band/label, Length (cm); 42cm +/- 0.2mm, Material; PEEK, Pressure Rating Max (psi); 7000, Pressure Rating Max (bar); 483, Tubing ID (in); 0.005, Tubing ID (mm); 0.125, Tubing OD (in); 1/16.
