Thin Layer Chromatography
Miles Scientific PLATES PRESCORED TLC 25/PK
Plate, Silica Gel, GF, UNIPLATES, 250micrometer, 10 x 20cm, Scored
Chemglass Life Sciences 50mL TLC Chromatography Sprayer, Improved
50mL TLC Chromatography Sprayer. Sprayer provides a fine, uniform spray ideally adjusted for the development of chromatographic patterns. Spray pattern is adjustable by varying the coverage of the vent hole with the users thumb. Sprayer is used with low pressure air (5/PSI) or rubber pressure bulb. Sprayer consists of an atomizer top attached to the reservoir with a Rodaviss 24/40 joint. This design provides for a positive, grease-free seal between the atomizer and reservoir and eliminates the glass hooks used on other sprayers. Complete sprayer consists of the atomizer top, Erlenmeyer shaped reservoir, CG-182-03 open-top screw cap and CG-305-212, #212 Viton o-ring.
Chemglass Life Sciences TLC Spotting Capillary Tubes, 8" Length, Approx 833pcs/Pkg
TLC Spotting Capillary Tubes, 8" Length, Approx 833pcs/Pkg. Non-calibrated tubes made from borosilicate glass for use with aqueous and organic solutions. Packed in half pound packages. Tubes are 1.0-1.1mm OD x .66-.70mm ID.
Chemglass Life Sciences TLC Developing Chamber Complete, Cylindrical, 34/15 Joint Size, Fits Plate 1in X 3
TLC Developing Chamber Complete, Cylindrical, 34/15 Joint Size, Fits Plate 1in X 3. Cylindrical glass chamber for development of TLC plates from 25 x 75mm to 50 x 200mm. Chamber has a short length standard taper outer joint. Stopper is a short length inner with a tool ball style handle. The CG-1181-01 and -02 chambers have a hex base for added stability. Complete chamber is supplied with bottle and stopper.
Biotage TLC Plates, 5cm x 10cm Glass, with Amino silica, 50 per cas
Biotage TLC plates are the perfect tool to predict flash methods for Biotage Sfar columns. For synthetic chemists, the benefits of matched TLC plates and flash cartridges are better purification throughput, increased compound purity and yield, and reduced solvent cost. Use these plates with Biotage Sfar KP-Amino columns.These glass plates are coated with amino functionalize silica and are 5cm x 10cm packed 50 plates to a case.
Sorbent Technologies Inc Resolv-Rf™ Silica Hard Layer TLC Plates, w/UV254, glass backed, 250um, 20x20cm, 25/pk
Resolv-Rf™ Silica Hard Layer (HL) TLC Plates are made with standard grade Silica 60, which has a surface area of 500 m2/g, mean pore size of 60A, specific pore volume of 0.75 ml/g, and particle size of 5-17um. The TLC plates contain UV254 fluorescent indicator. This analytical hard layer is bound to a glass support. It has a thickness of 250um and dimensions of 20x20cm. There are 25 plates per pack. Resolv-Rf™ TLC Plates are suitable for all common separations. The layer has a hardness that is abrasion resistant and can be easily labeled with a lead pencil for clear identification. The dense coating yields narrow bands for a high separation efficiency. Applications include: drug synthesis compounds, identity of drugs, food and environmental samples, quality control testing of pharmaceuticals, etc. Made in the U.S.A.
Macherey-Nagel TLC glass plates SIL G-25 UV254, 20x20 cm
TLC precoated plates SIL G-25 UV 254 - size: 20x20 cm - pack of 25
Sorbent Technologies Inc Silica G TLC Plates, w/UV254, polyester backed, 200um, 4x8cm, 50/pk
"Silica G" is a standard grade, unmodified Silica 60 with a surface area of 500 m2/g, mean pore size of 60A, specific pore volume of 0.75 ml/g, and particle size of 5-17um. The TLC plates contain UV254 fluorescent indicator. This analytical soft layer is bound to a plastic support. It has a thickness of 200um and dimensions of 4x8cm. There are 50 plates per pack.
Chemglass Life Sciences TLC Stopper only, 34/15 Joint Size
Replacement TLC stopper for the CG1181 series of TLC developing chambers. Stopper only, 34/15 Joint Size.
Sorbent Technologies Inc Silica G TLC Plates, w/UV254, polyester backed, 200um, 2.5x7.5cm, 200/pk
"Silica G" is a standard grade, unmodified Silica 60 with a surface area of 500 m2/g, mean pore size of 60A, specific pore volume of 0.75 ml/g, and particle size of 5-17um. The TLC plates contain UV254 fluorescent indicator. This analytical soft layer is bound to a plastic support. It has a thickness of 200um and dimensions of 2.5x7.5cm. There are 200 plates per pack.
Chemglass Life Sciences TLC Spotting Capillary Tubes, 6in Length, Approx 1300 Pcs/Pkg
TLC Spotting Capillary Tubes, 6in Length, Approx 1300 Pcs/Pkg. Non-calibrated tubes made from borosilicate glass for use with aqueous and organic solutions. Packed in half pound packages. Tubes are 1.0-1.1mm OD x .66-.70mm ID.