TLC Developing Tanks
TLC Developing Tanks
MilliporeSigma™ Supelco™ Rhodamine B Solution
0.2% in isopropanol, for TLC derivatization
Wilmad Labglass DEV TANK TLC 25X75 95MM
Developing Tank, TLC, Cylindrical, Screw Cap. Plate Width x Length: 25mm x 75mm; Approximate Height: 95mm. Glass cylindrical developing chambers w/ Flat bottom and molded plastic caps.
Chemglass Life Sciences TLC Developing Tank (Replacement Lid Only)
Replacement lid for the CG118401 TLC Developing Tank. Lid only.
Camag Scientific Twin Trough Chamber For 10X10 Cm Plates, With Stainless Steel Lid
This Is A Classical Developing Tank For Thin-Layer Chromatography. Compared To A Flat Bottom Chamber Less Solvent Is Needed. A Twin-Trough-Chamber Reduces Disposal Problems And Allows Preconditioning Of The Plate With Any Solvent And For Any Duration. For Preconditioning Or Saturation, The Trough Opposite To The Plate Is Filled With Developing Solvent. The Use Of A Saturation Pad Is Recommended For A Fast, Homogeneous And Reproducible Chamber Saturation Process. This Tank Is Suitable For Plates Up To 10 X 10 Cm In Size.
Chemglass Life Sciences TLC Developing Chamber Complete, Cylindrical, 34/15 Joint Size, Fits Plate 1in X 3
TLC Developing Chamber Complete, Cylindrical, 34/15 Joint Size, Fits Plate 1in X 3. Cylindrical glass chamber for development of TLC plates from 25 x 75mm to 50 x 200mm. Chamber has a short length standard taper outer joint. Stopper is a short length inner with a tool ball style handle. The CG-1181-01 and -02 chambers have a hex base for added stability. Complete chamber is supplied with bottle and stopper.
Chemglass Life Sciences TLC Developing Tank, Complete
Heavy duty, molded TLC developing tank for use with plates up to 20 x 20 cm ( 8in x 8in). The weight of the tank is approximately 15 pounds, and the bottom is ground to insure stability. Inside dimensions of the tank are 27cm wide x 7cm deep x 26 cm high (10 5/8in x 2 7/8in x 10in). Tank is supplied complete with lid.
Camag Scientific Twin Trough Chamber For 20 X 20 Cm Plates, With Stainless Steel Lid
This Is A Classical Developing Tank For Thin-Layer Chromatography. Compared To A Flat Bottom Chamber Less Solvent Is Needed. A Twin-Trough-Chamber Reduces Disposal Problems And Allows Preconditioning Of The Plate With Any Solvent And For Any Duration. For Preconditioning Or Saturation, The Trough Opposite To The Plate Is Filled With Developing Solvent. The Use Of A Saturation Pad Is Recommended For A Fast, Homogeneous And Reproducible Chamber Saturation Process. This Tank Is Suitable For Plates Up To 20 X 20 Cm In Size.
Miles Scientific Latch-Lid Developing Chamber for 20x20 cm TLC Plates
Analtech's glass TLC developing chambers provide optimum developing conditions for a variety of TLC plate sizes and shapes. Precision ground surfaces provide tight seals between tanks and glass covers and permit complete saturation of chambers with solvent vapor for uniform development of chromatograms. Each chamber is shipped with the appropriate lid. Inside Dimensions: 25 cm H x 28 cm W x 7.5 cm D. For use with: 20 x 20 cm TLC plates or smaller.
Chemglass Life Sciences TLC Developing Chamber Complete, Cylindrical, 60/15 Joint Size, Fits Plate 2in X 4
TLC Developing Chamber, Cylindrical, 60/15 Joint Size, Fits Plate 2in X 4. Chamber has a short length standard taper outer joint. Stopper is a short length inner with a tool ball style handle. Complete chamber is supplied with bottle and stopper.
Chemglass Life Sciences TLC Developing, Latch-Lid only
Latch lid replacement for the CG118301 TLC Developing tank. All of the metal components of the Latch-Lid mechanism are made of stainless steel. Latch-Lid only.
Camag Scientific Horizontal Developing Chamber For 10 X 10 Cm Plates
In The Horizontal Developing Chambers, Hptlc Plates Can Be Developed From Both Opposing Sides Towards The Middle. This Permits The Number Of Samples To Be Doubled As Compared With Development In A Tank, Provided The Separation Distance Of 45 Mm, I.E. 50 Mm Minus 5 Mm Distance From The Edge, Is Sufficient. This Chamber Type Is Often Used For Screening Purposes. The Obtained Chromatograms Differ From Those Obtained With The Same Mobile Phase System Developed In Vertical Chambers. This Chamber Is Suitable For Plates Up To 10 X 10 Cm In Size.
Chemglass Life Sciences TLC Developing Tank Complete, Latch-Lid
Heavy duty, molded TLC developing tank for use with plates up to 20 x 20 cm ( 8in x 8in). The weight of the tank is approximately 15 pounds and the bottom is ground to insure stability. The unique latching system holds the matching ground surfaces of the lid and tank firmly in place, enhancing the stability of the saturated atmosphere for the developing TLC plates. All of the metal components of the Latch-Lid mechanism are made of stainless steel. Inside dimensions of the tank are 27cm wide x 7cm deep x 26 cm high (10 5/8in x 2 7/8in x 10in). Tank is supplied complete with lid.
Chemglass Life Sciences TLC Bottle only, Cylindrical, 34/15 Joint Size, Fits Plate 1in X 4
Replacement TLC bottle for the CG1181 series of TLC developing chambers. Bottle only, Cylindrical, 34/15 Joint Size, Fits Plate 1in X 4
Chemglass Life Sciences TLC Bottle only, Cylindrical, 60/15 Joint Size, Fits Plate 2in X 8
Replacement TLC bottle for the CG1181 series of TLC developing chambers. Bottle only, Cylindrical, 60/15 Joint Size, Fits Plate 2in X 8.
Chemglass Life Sciences TLC Tank Rack, Aluminum, PTFE Coated
PTFE coated aluminum rack to fit either CG-1183 or CG-1184 TLC developing tank. Rack will hold six 20cm x 20cm x 1/8in or twelve 20cm x 20cm x 1/16in plates.