HPLC Columns
Waters Corp XBridge Peptide BEH C18 Prep Guard Cartridge, 130à , 10 µm, 30 mm X 10 mm, 1K - 15K, 1/pk
XBridge Peptide BEH C18 Prep Guard Cartridge, 130à , 10 µm, 30 mm X 10 mm, 1K - 15K, 1/pk
Waters Corp Preparative Column, C4, 300 Å, 10 μm
These protein BEH C4 OBD columns are quality control (QC) tested and optimized for the separation of proteins based on size, hydrophobicity, and isoelectric point. Featuring a trifunctional C4 ligand, fully end-capped and bonded to ethylene-bridged hybrid (BEH) particles, they offer less retention compared to traditional C18 phases, which helps to minimize protein carryover, increase protein recovery, and improve peak capacity.
- Trifunctional C4 ligand, fully end-capped.
- QC tested with protein standards for reproducible performance.
- Less retentive than traditional silica-based C18 phases.
- Minimizes protein carryover, increases protein recovery, and improves peak capacity.
- Particle size: 10 μm.
- Pore size: 300 Å.
- pH range: 1 to 10.
- Maximum pressure: 6000 psi (415 Bar).
- Dimensions: 19 mm inner diameter, 250 mm length.
Sepax Technologies Inc Sepax HPLC Column HP-C18, 5 µm, 200 Å, 21.2 x 250 mm
HP-C18 uses full coverage bonded silica packing, which provides high stability. Compatible with 100% aqueous mobile phase and suitable for separations of acidic, neutral and basic organic compounds, as well as pharmaceuticals and peptides. ODS monolayer formed by special bonding chemistry does not collapse in pure aqueous solution.
Sepax Technologies Inc Sepax HPLC Column Proteomix WCX, NP3, 2.1 x 30 mm
Sepax HPLC Column Proteomix WCX, NP3, 2.1 x 30 mm
Waters Corp Waters CSH Fluoro-Phenyl Column, 130Å, 3.5 μm, 4.6 mm × 75 mm
This column is designed to maximize selectivity differences and provides method development freedom, especially with low pH mobile phases. Its non-encapped sorbent enhances the retention of acidic compounds.
- Chemistry: PFP/Fluoro-Phenyl
- Separation mode: Reversed Phase
- Particle substrate: Hybrid
- pH range: 1 to 8
- Maximum pressure: 6000 psi (415 Bar)
- Endcapped: No
- Silanol activity: Low
- Particle shape: Spherical
- System: HPLC
- Particle technology: CSH
- USP classification: L43
- Carbon load: 10%
- Units per package: 1 package
Mac-Mod Avantor ACE Excel C18-AR, 100 , 2 m, 3.0 x 50 mm UHPLC Column
Avantor ACE Excel UHPLC and HPLC columns are manufactured with 100 Ultra-Inert Base Deactivated Silica specifically designed for your HPLC method development needs - Note SuperC18 is 95 . Avantor ACE HPLC columns are available in a wide range of bonded phases (i.e. C18, C18-AR, C18-PFP, C18-Amide, CN-ES, SuperC18, NH2, C8, C4, Phenyl, AQ, CN and Sil). Avantor ACE Excel UHPLC and HPLC columns are avaialble in 1.7, 2, 3, and 5 m particle sizes in all analytical column sizes. All Avantor ACE Excel columns are known for their excellent peak shape and batch to batch reproducibility. Columns are packed in 1000 bar UHPLC hardware. Note: Avantor ACE Excel UHPLC guard columns are available for all 1.7 and 2 m particle sizes across all 2.1 mm 4.6 mm column ID - Note: H0011 connects directly to the analytical column - Guard column cartridges are available in 3-packs. For 3 and 5 m Excel columns use same guard systems used for Avantor ACE HPLC analytical columns.
Waters Corp Bondapak C18 Radial-Pak Column, 125Å, 15 - 20 µm, 8 mm X 100 mm, 1/pk
Bondapak C18 is available in two different particle sizes, 15-20µm and 37-55µm, providing easy method transfer from µBondapak through preparative scale up. If you are developing a new purification protocol, Bondapak provides the best balance between resolution, throughput and cost.
Waters Corp Torus 2-PIC OBD Prep Column, 130Å Pore, 5 μm, 50 × 150 mm
The Torus 2-PIC OBD Prep Column is engineered to enhance the efficiency of the ACQUITY UPC2 system for swift and dependable achiral separations. This column simplifies the method development process, provides excellent peak shape, and reduces or eliminates the need for additives, while offering additional selectivity for various compounds and improving robustness.
- Specifically designed to utilize the full power of the ACQUITY UPC2 system for fast and robust achiral separations.
- Simplifies the method development process.
- Provides excellent peak shape.
- Eliminates or reduces the need for additives.
- Offers additional selectivity for a broad range of compounds.
- Ensures improved robustness.
NANOMICRO TECHNOLOGIES INC ChromCore 120 C18 LC Analytical Column, 5 μm, 4.6 x 250 mm, Stainless Steel
ChromCore 120 C18 columns are based on monodispersed high-purity porous silica particles densely bonded with C18 and exhaustive end-capping for minimal undesired silanol activity They feasure high column efficiency excellent peak shape and good column-to-column reproducibility making them suitable for a broad range of analytes with low to high hydrophobicity
Mac-Mod Avantor ACE Excel C18, 100 , 5 m, 2.1 x 100 mm HPLC Column
Avantor ACE Excel UHPLC and HPLC columns are manufactured with 100 Ultra-Inert Base Deactivated Silica specifically designed for your HPLC method development needs - Note SuperC18 is 95 . Avantor ACE HPLC columns are available in a wide range of bonded phases (i.e. C18, C18-AR, C18-PFP, C18-Amide, CN-ES, SuperC18, NH2, C8, C4, Phenyl, AQ, CN and Sil). Avantor ACE Excel UHPLC and HPLC columns are avaialble in 1.7, 2, 3, and 5 m particle sizes in all analytical column sizes. All Avantor ACE Excel columns are known for their excellent peak shape and batch to batch reproducibility. Columns are packed in 1000 bar UHPLC hardware. Note: Avantor ACE Excel UHPLC guard columns are available for all 1.7 and 2 m particle sizes across all 2.1 mm 4.6 mm column ID - Note: H0011 connects directly to the analytical column - Guard column cartridges are available in 3-packs. For 3 and 5 m Excel columns use same guard systems used for Avantor ACE HPLC analytical columns.