Air Purification Panels, Manifolds, and Filters
Air purification panels, manifolds, and filters work in conjunction to ensure Grade-D quality air is available and distributed to supplied-air respirator (SAR) wearers from a common source.
Airline filtration panel systems are portable or wall-mounted devices that enable breathable air for single or multiple users with or without independent regulators. Associated panel filters remove water, particulate, oils, mists, organic vapors, and odors. Most systems feature carbon monoxide (CO) and/or oxygen monitoring capabilities with audible and/or visual alarms.
Selection of air purification panels is based on number of workers, airline respirator types, required flow, and pressure requirements.
Supplied-air respirator (SAR) airline manifolds are often referred to as splitters. Their purpose is to direct filtered air to multiple sockets to enable more than one worker to connect to a single air supply. SAR airline hoses transport Grade-D quality air from the air compressor to the worker.
Supplied-air compressors and ambient-air pumps work with SAR panels, manifolds, and filters to provide safe, breathable air to workers in environments with low oxygen levels or compromised air quality. For a complete list of air compressors, air pumps, and breathing carts see Respiratory Air Sources. For more information on complementing SAR airline hoses and fittings, refer to Atmosphere-Supplying Respirator Parts and Accessories.
Regulatory compliance details can be obtained at the individual product level.
Bullard™ Clean Air Box (CAB) Series Fixed Breathing Air Filtration/CO Monitoring, Two to Four Worker System
Wall-mount clean air boxes offer 3-stage filtration with carbon monoxide (CO) monitoring to comply with OSHA’s requirement for providing workers with Grade D breathing air.
Bullard™ Remote Air Manifold (RAM) Series, Two Worker System
Remote air manifolds are effective for air distribution and regulation to two workers from a common source. RAM units enhance respirator-wearing worker mobility by giving the flexibility to work more than 300 feet from the air source.
MSA™ Airline Respirator Manifolds
Compressed airline manifolds help ensure proper air supply from a single air source.
Bullard™ Remote Air Manifold (RAM) Series, Four Worker System
Remote air manifolds are effective for air distribution and regulation to four workers from a common source. RAM units enhance respirator-wearing worker mobility by giving the flexibility to work more than 300 feet from the air source.
Bullard™ 41 Series Breathing AirLine Filter Replacement Parts
Replacement parts for use with 41 Series breathing airline filters.
3M™ Filter Cartridge W-2811-10
Filter assembly reduces the amount of particles that may be present in the compressed air system, including water and oil mist.
3M™ Coalescing Filters
Used where the concentration of liquid aerosols in compressed air are greater than what can be filtered by the 3M™ Compressed Air Filter and Regulating Panel W-2806 alone.
Bullard™ CAB Series Remote Alarm for CO Monitor
Remote alarm accessory for use with CAB series.
Bullard™ Carbon Monoxide (CO) Monitoring System
Monitor analyzes the breathing air and displays the CO concentration.
Bullard™ Clean Air Box (CAB) Series Calibration Kit
OSHA-approved calibration kit is used to monitor CO content for clean air boxes.
3M™ Filter Replacement Kit
Used with 3M™ Portable Compressed Air Filter and Regulator Panel 256-02-01.
3M™ Portable Compressed Air Filter and Regulator Panel Accessory, Filter Kit
Used with the 3M™ Portable Compressed Air Filter and Regulator Panel 256-02-00.
Bullard™ Sampling Connector Kit for COHP CO Monitor
Kit connects the COHP monitor to the air source.
Bullard™ Replacement Filters for 15 &30 CFM Clean Air Box Series Breathing Air Filtration Systems
Filter element replacement parts for use with 15 and 30 CFM clean air boxes.
Bullard™ Replacement Filters for 50 CFM Clean Air Box Series Breathing Air Filtration Systems
Filter element replacement parts for use with 50 CFM clean air boxes.