Maintenance Lubricants and Penetrating Fluids
Scientific Instrument Services Inc Edwards ULTRAGRADE™ 19 Oil 12 X 1L
Edwards ULTRAGRADE™ Performance 19 uses a solvent refining process, whereas this oil is produced by a unique hydro treating process. This process eliminates nitrogen, sulphur and oxygen and the aromatic hydrocarbons, leaving a clear base stock essentially free of impurities. When combined with additives, the ULTRAGRADE™ Performance oils give improved vacuum performance, thermal and oxidation stability and rust inhibition. The properties of the oils allow them to be used in a wide range of applications. 12x1L
Excel Equipment and Supply Kolor Kut 2.5 OZ Modified Water Finding Paste
Unique Kolor Kut Modified Water Finding Paste works with a measuring gauge, rod, or calibrated line to determine water levels. Apply the paste in the area that the level is expected to appear. When the paste comes in contact with water, it will immediately change from golden brown to bright red, marking the level. Gauges water levels in oxygenated fuels. Paste wipes off easily after use and leaves no residue.
Leybold Vacuum Products Inc Leybonol LVO 210 Synthetic Oil, 5 L
Synthetic oil (ester oil with additives). Very high thermal, oxidative and chemical stability, good deterging and dispersion characteristics, excellent wear protection. For high temperature applications, pumping of air, chemically inert gases, carbon dioxide (dry),carbon monoxide, organic solvent vapors, resin vapors, etc.
Cotronics Corp Aluminum Durabond 950 Pint
Durabond Adhesives were specially formulated to bond metals, ceramics and dissimilar materials for use to 2000ºF. These metallic composite adhesives overcome the brittle bonds obtained with ceramics and offer some of the ductility and impact resistance associated with soldering and welding. Durabond adhesives can be drilled, tapped, machined, etc. They do not contain Epoxies or Silicones which would limit their use to 600ºF. These composites are inorganically bonded and chemically cured. They are safe and easy to use. No odors. No VOC's. Just mix, apply and cure at room temperature. Base: Aluminum, Color: Density (# / ft3) 120, Thermal Expansion (10-6/ºF) 10, Pot Life (Hours) 2, Bond Strength @ 200ºF (psi) 500 Bond Strength @ 1200ºF (psi) 1000, Components 2, Mixed Ratio (A / B) 100/60, Cure (@ R.T.) 24
Ellsworth Adhesive Co SYLGARD 184 SILICONE 3.9KG
2-part, 10:1 mix, transparent encapsulant with good flame resistance. 10:1 mix ratio; flowable; room temperature or heat cure; high tensile strength; same as Sylgard 182 Elastomer but with RT cure capability; UL recognized; Mil Spec approved.
Edmund Optics NORLAND OPTICAL ADHESIVE NO81
1 oz. application bottle of Norland Optical Adhesive (NOA) 81.
Smooth On Inc Ecoflex™ 00-50, 2lb
Ecoflex™ rubbers are platinum-catalyzed silicones that are versatile and easy to use. Ecoflex™ rubbers are mixed 1A:1B by weight or volume and cured at room temperature with negligible shrinkage. Low viscosity ensures easy mixing and de-airing, or you can choose to mix and dispense using our convenient dispensing cartridges. Cured rubber is very soft, very strong and very “stretchy”, stretching many times its original size without tearing and will rebound to its original form without distortion.
Leybold Vacuum Products Inc Leybonol LVO 420 Synthetic Oil, 1 L
Synthetic oil (perfluoropolyether PFPE, free of Additivs). Chemically inert. Highest thermal stability. Pumping axidants like oxygen, ozone or nitrous oxides as well as reactive substances like halogens, hydrogen halides and conditionally Lewis acids.
3M VETBOND
Vetbond, Tissue Adhesive 1469; 3M;; Liquid; Clear blue; F.P. 185 deg.F; B.P. 300 deg.F; Density: 1.09g/mL; Specific Gravity: 1.09; Used on animals as bandage; Keep container tightly close
Epoxy Technology Inc EPO-TEK H20E Silver filled Epoxy 1oz kit
This item must be ordered in quantities of 4 per supplier requirements
Two component, 100% solids silver-filled epoxy paste designed specifically for chip bonding in microelectronic and optoelectronic applications. H20E is used extensively for thermal management applications due to its high thermal conductivity. It has proven itself to be extremely reliable over many years of service and is still the conductive adhesive of choice for new applications. H20E two part kits are stored at room temperature.