Probes and Electrodes
Hach Company Radiometer Analytical PHC2011-8 Combination Red-Rod pH Electrode for Alkaline Samples (alkaline glass, glass body, BNC)
The Radiometer PHC2011-8 Combination pH Electrode has a glass body, Red-Rod reference system, refillable electrolyte (sat. KCl) and porous pin junction. The PHC2011-8 has a glass membrane specific for alkaline samples. The PHC2011-8 is compatible with Hach Sension+ laboratory pH meters (or any meter with a BNC connection).
Hach Company Hach PEEK Salt Bridge, Ceramic Outer-Junction for pHD Differential pH/ORP Sensors
Replacement salt bridge for Hach pHD differential pH and ORP sensors. The PEEK body with ceramic outer junction is field-replaceable and is shipped in a salt solution to prevent dehydration; replace every 6 months for optimum performance.
- PEEK body with ceramic outer junction
- FKM/FPM O-ring for chemical compatibility
- Shipped in salt solution to prevent dehydration
- Field-replaceable double-junction design
- Recommended replacement every 6 months for optimum performance
Cole-Parmer Oakton self-cleaning pH electrode, CPVC housing, 10-ft cable, BNC
There will be no further buildups with this self-cleaning electrode cable. Its flat surface prevents buildups, while fluid flow cleans surface for longer life. It can be used with most meters and controllers. The BNC connector and ATC element work with a variety of units. Its double junction is for difficult applications.
Cole-Parmer Oakton ORP Electrode, Single-Junction, Submersible; 12 x 130 mm
ORP electrodes measure oxidation/reduction levels in plating baths, waste water monitoring, and more. Use platinum-band electrodes for general-purpose applications from 23 to 212>F (-5 to 100>C). Use gold-disc electrodes for solutions containing cyanide from 23 to 230>F (-5 to 110>C).
Research Products International Corp Replacement Platinized Titanium Electrode for Genie Blotter
Replacement Platinized Titanium Electrode for use with Genie Blotter
Waters Corp Puncture Needle Assembly, .059 OD, I-Class, M-Class, UPC2 Compatible
This replacement Puncture Needle Assembly is designed for use on I-Class, M-Class, and UPC2 Fixed Loop Sample Managers. Its primary function is to pierce vial caps, allowing the sample needle to enter vials for sample analysis.
- Designed for use on I-Class, M-Class, and UPC2 Fixed Loop Sample Managers
- Pierces vial caps to allow sample needle to enter vials
- .059 outer diameter
- UPLC system compatible
- Mechanical type
- One unit per package
- As required replacement schedule
Cole-Parmer Gel-Filled Side-Mount pH Probe, DJ/PVDF/100hm RTD; Tinned/BNC
Sealed AgCl reference cell requires no refilling during use. Rugged PVDF housing with 1/2'' NPT(M) thread withstands pressures up 100psi, good for measurements up to 14 pH units. Includes a 10-ft cable with BNC connector.
World Precision Instrument Ussing Electrode Kit
The Electrode Kit contains four voltage/current electrodes, plus four luer-tipped cartridges. Electrodes are threaded and screw securely into the end of each cartridge. The luer tip then plugs securely into the luer openings of the chamber. The cable from each electrode terminates with a 2 mm pin which may be plugged into voltage/current clamps such as WPI’s DVC1000 or EVC-4000. The miniature electrode-gel cartridge is a small plastic tube with a male luer tip identical to those at the tip of hypodermic syringes. The tube may be filled with different gel materials; agar is commonly used but other gel materials may also be satisfactory.
Hach Company Radiometer Analytical XC161-9 Combination pH Electrode for Microsamples (d=5 mm, glass body, screw cap)
The Radiometer XC161 Combination pH Electrode has a glass body, Ag/AgCl reference system, refillable electrolyte (3M KCl + sat. AgCl) and micro diameter (5 mm) for small volume sample measurements. The XC161 is a screw cap electrode and requires the CL114 cable (part no. A94L114) for compatibility with Hach Sension+ laboratory pH meters.
Hach Company Radiometer Analytical PHC3359-8 Combination pH Electrode for Microsamples (d=3 mm, glass body, BNC)
The Radiometer PHC3359-8 Combination pH Electrode has a glass body, Ag/AgCl reference system, refillable electrolyte (3M KCl + sat. AgCl) and micro diameter (3 mm) for small volume sample measurements. The PHC3359-8 has a BNC connector and is compatible with Hach Sension+ laboratory pH meters.
eMolecules 910308-92-8 | Ambeed | (S)-tert-Butyl (1-(3-bromophenyl)-2-hydroxyethyl)carbamate | 100mg | 600827598 | A112692 | MFCD27952001 | 316.195 | C13H18BrNO3
Ambeed | (S)-tert-Butyl (1-(3-bromophenyl)-2-hydroxyethyl)carbamate | 100mg | 600827598 | A112692 | 910308-92-8 | MFCD27952001 | 316.195 | C13H18BrNO3
Cole-Parmer Oakton Electrode pH All-in-one SJ with ATC for 600 Series Meters
Replace electrodes when they break, no longer hold calibration, cannot be rehydrated, or are not compatible with your sample.
Cole-Parmer pH Electrodes for Field Use; Single-Junction 3 Foot Cable
These combination electrodes withstand the most demanding field conditions—the semi-domed tip protects the pH bulb and ensures a quick response when taking measurements in harsh and dirty environments. Easy-to-clean electrodes feature an impact-resistant epoxy body for further protection from the elements. The large, annular ceramic reference junction and sealed cross-linked polymer reference resist clogging. Operating range is from 0 to 14 pH. Electrodes measure 110 mm L x 12 mm dia and withstand temperatures up to 212°F (100°C). All models have BNC connectors.
Oakton by Cole-Parmer In-Line pH Probe, DJ/PVDF/100Ohm RTD/10'; Tinned/BNC
In-line electrodes operate from 32 to 212°F (0 to 100°C) and have a chemical-resistant PVDF housing with a 1/2'' NPT(M) thread. Housing measures 4'' x 15/16'' diameter. Electrode extends 1'' beyond housing. Maximum pressure 100 psi. Measure pH from 0 to 13.
Hach Company Intellical™ PHC101 Laboratory Low Maintenance Gel Filled pH Electrode, 1 m Cable
Intellical™ PHC101 is a digital combination pH electrode with built-in temperature sensor. PHC101 has low maintenance needs thanks to a non-refillable gel-filled single open reference junction. The laboratory version of this pH electrode is shockproff with its epoxy plastic body protecting down to the glass bulb sensing element. The Electrode is available with a 3 or 1 m cable. The PHC101 electrode is ideal for measuring pH in wastewater, drinking water and general aqueous applications. The PHC101 is not suitable for use with organic solvents or samples with pH less than 2.