pH, ORP, and Titration, Combination Electrodes
Chemglass Life Sciences PH Electrodes for Chemglass Reactors, 12mm Shaft Diameter, 300mm Usable Shaft Length, 20mm Minimum Immersion Length, Glass Shaft Material, Fixed Cable Electrode Head, 0 to 100°C Temperature Range
Metrohm pH electrodes designed to be used with Chemglass reactors and data loggers. All electrodes are supplied with integrated PT 1000 sensor for temperature correction and have a BNC connector. 12mm Shaft Diameter, 300mm Usable Shaft Length, 20mm Minimum Immersion Length, Glass Shaft Material, Fixed Cable Electrode Head, 0 to 100°C Temperature Range.12mm OD probes designed to go directly into smaller reactors using the standard taper joint adapters (CG-1872-A-01 through CG-1872-A-03).
Cole-Parmer Tuff-Tip pH Electrode, No ATC, BNC, 3/4"
Don't worry about bulb breakage, the unique Tuff-Tip design helps protect bulbs. Choose chemical-resistant Ryton PPS standard electrode or with graphite tip. Eliminate electrical noise with graphite-tipped models. Ideal for viscous or severe applications, these electrodes reduce contamination and clogging with uniform pore size.
Cole-Parmer Hach 2028RO Differential ORP electrode, 10-ft cable, LCP body
GLI Differential ORP electrode, 10-ft cable, LCP body
Cole-Parmer pH Probe, DJ/Glass/100Ohm RTD/12mm/10'; Tinned/BNC
General purpose, double-junction electrodes prevent contamination of the AgCl reference cell by solutions that might react with silver (heavy metals, organics, sulfides). Electrodes can be used for measurements up to pH 13. Maximum pressure is 150 psi at 25°C.
Cole-Parmer pH Probe, Refillable, High-temp, pH with high Na+
Glass body combination probes are able to withstand higher temperatures and chemical attack. All have 3.3 ft (1 m) long cables with BNC connectors.
Cole-Parmer Tuff-Tip pH Electrode, 3/4" (100 Ohms RTD), 3.5mm phono plug
Don't worry about bulb breakage, the unique Tuff-Tip design helps protect bulbs. Choose chemical-resistant Ryton PPS standard electrode or with graphite tip. Eliminate electrical noise with graphite-tipped models. Ideal for viscous or severe applications, these electrodes reduce contamination and clogging with uniform pore size.
Cole-Parmer Extech 60120B pH Electrode with BNC Connector
Among our assortment of replacement electrodes, reagents, and other accessories for Extech instruments.
World Precision Instrument Potassium Electrode Tips, Replacement
Replacement tips
Set of 3 potassium replacement tips for ion selective electrodes. Change the tip on your holder in less than a minute. Can be stored 3-4 months under refrigeration.
World Precision Instrument STX HTS EVOM Electrode for CORNING 96
Semi-permeable HTS (high throughput screening) culture plates have become a standard tool for pharmaceutical and institutional research in epithelial transport. HTS culture plates have well cups which are bonded together into a single assembly and are not removable. This makes the plates ideal for automated applications, but imposes a significant inconvenience when TEER must be measured in the absence of an automated system. WPI’s STX HTS series of EVOM™ electrodes, replacing the STX100 electrodes, provide a cost-effective alternative to automation, allowing HTS well plates to be measured manually using a hand–held electrode.
To learn more about our warranty options, click here.
World Precision Instrument Carbon Fiber Electrode, Length 50 um
Electrochemical detection of oxidizable compounds
Carbon fiber microelectrodes have been used in both the detection of oxidizable compounds (Gonon, et al., 1978; Cahill and Wightman, 1995) and extracellular single-unit recording (Armstrong-James and Millar, 1979). WPI™s ultra-sensitive and low-noise carbon fiber (CF) electrodes can be applied, with our Micro-C Potentiostat or similar instruments, in the electrochemical detection of catecholamines (epinephrine, norepinephrine and dopamine), indolamines (serotonin, 5-HT or melatonin), Fe (II) and other oxidizable compounds.
World Precision Instrument Carbon Fiber Electrode, L 100 um
Electrochemical detection of oxidizable compounds
Carbon fiber microelectrodes have been used in both the detection of oxidizable compounds (Gonon, et al., 1978; Cahill and Wightman, 1995) and extracellular single-unit recording (Armstrong-James and Millar, 1979). WPI™s ultra-sensitive and low-noise carbon fiber (CF) electrodes can be applied, with our Micro-C Potentiostat or similar instruments, in the electrochemical detection of catecholamines (epinephrine, norepinephrine and dopamine), indolamines (serotonin, 5-HT or melatonin), Fe (II) and other oxidizable compounds.
World Precision Instrument Electrode Adapter for DAM50 Bioamplifier
Simplify your input connections to the DAM50 when you are setting up your applications
This optional electrod adapter is designed for use with the DAM50 Bioamplifier. See some of the sample setups possible with this component in the Details below.
World Precision Instrument Electrode Handle 4.0 mm
Electrode holder for popular manipulators
This 4.0 mm electrode holder is designed for use with Narishige and Zeiss manipulators
Bellco Glass, Inc. Dissolved oxygen and PH electrodes are the eyes and ears for many biotechnology processes. High quality sensors are required for critical measurement and Hamilton sensors are some of the finest in the world. Bellco offers Hamilton gel-filled PH and stainl
Dissolved oxygen and PH electrodes are the eyes and ears for many biotechnology processes. High quality sensors are required for critical measurement and Hamilton sensors are some of the finest in the world. Bellco offers Hamilton gel-filled PH and stainl