pH Electrode Accessories
Hach Company pH Encapsulated Sensor
pH Encapsulated Sensor-LCP Body-5 Wire-Union Mount-High Purity Water Glass-Low Conductivity-10 ft Cable LCP (Liquid Crystal Polymer) Union Mounting Style 3m Analog Cable 5-Wire with Built-In Preamplifier pH Glass Electrode for Low Conductivity Solutions
Broadley James Corporation Soaker Bottles,4-Pack of Soaker Bottles for 12mm probes, 4 Pack
Soaker Bottles,4-Pack of Soaker Bottles for 12mm probes,Protection for any 12 mm sensor during transportation or storage,The o-ring fits securely against the electrode body,sealing the solution from the atmosphere to minimize evaporation
Anton Paar 600mm elongated filling tube for tanks and drums
Sometimes samples are hard to reach with the standard filling tube, e.g. when tanks or drums are not fully filled. In such cases you can remove the standard filling tube and use the elongated filling tube for more convenient sample filling. Suitable for use with Anton Paar density metersDMA 35 Standard Advanced portable density and concentration meter NC1488853,Snap 41 Portable Alcohol Meter for sugar-free distilled spirits NC1818207
Grainger pH Electrode Glass BNC Round Tip
The SensoRex pH Electrode from Sensorex is a glass body combination pH electrode designed for general purpose pH measurement in the laboratory. It has a 12 mm diameter glass body, gel filled reference with Ag/AgCl reference wire, ceramic junction, and BNC connector. The electrode has a pH range of 0-14 pH, temperature range of 0-80°C, and impedance of less than 150 MΩ. It requires storage solution and features a quick response time. The electrode can be used for testing water, wastewater, food products, chemical solutions, and more. It is compatible with any pH meter, transmitter, or controller with BNC connector.
Grainger pH Electrode Ryton PPS BNC Round Tip
The SensoRex pH Electrode pH 16Z001 is a gel-filled combination pH electrode with a glass body and epoxy body gel filled reference. It has a 12 mm diameter pH bulb and internal Ag/AgCl reference electrode. The electrode has a BNC connector and 1 m cable. It has a 3 mol/L KCl electrolyte solution. The electrode has a pH range of 0-14 pH with an accuracy of ±0.02 pH. It has a temperature range of 0-80°C. The response time is ≤10 seconds. This electrode is designed for laboratory, industrial, and municipal water testing applications. It requires storage solution when not in use.
Grainger pH Electrode Epoxy BNC Round Tip
The Grainger Approved pH Electrode Epoxy BNC is a pH electrode with an epoxy body and BNC connector. It has a glass bulb sensing element and measures pH from 0-14 pH with an accuracy of ±0.1 pH. The electrode has a temperature range of 0-80°C. It has a response time of less than 10 seconds and an impedance of less than 500 MΩ. The electrode is 12 mm diameter x 150 mm length. It requires a BNC connector and is compatible with standard pH meters. The electrode is maintenance free with no refilling required.
Grainger pH Electrode Epoxy STD Round Tip
The 16Y957 is a 3M Scotch-Brite General Purpose Hand Pad, 6" x 9", Maroon from Grainger. It features an open, nonwoven nylon web construction that cuts through tough baked-on carbon, grease and oil. The maroon nylon web with mineral abrasive effectively cleans pots, pans, grills, ovens and other kitchen surfaces. This abrasive pad measures 6 inches by 9 inches and has a maximum use temperature of 392 degrees Fahrenheit. It can withstand laundering up to 500 times. The maroon color-coding indicates a medium duty scrubbing power. This hand pad helps restore kitchen surfaces to a like-new finish.
Hach Company Sension 5292 Cond cell
Sension Plus 5292 Conductivity cell with two Platinum plates for general measurements in lab Conductivity cell with two Platinum plate electrodes and glass body for Sension Plus Laboratory Meters Cell constant k is 1 cm-1 1 m cable Measuring range 100 micro siemens/cm at 10-80C
Hach Company SC1000 6 Sensor 8mA Out 4mA In
SC1000 Probe Module-6 Sensor Connectors-8 mA Output-4 mA/digital Input-4 Relays-100-240 VAC with ConduitsIncludesSC1000 Probe Module with installed cards (as requested)-Basic User Manual
World Precision Instrument 13776 Adapter, Reference Electrode to Ground Jack
- Connector A: Banana (male)
- Connector B: 2 mm jack
- Cable: none
Grainger pH Electrode Epoxy BNC Round Tip
The Grainger Approved pH Electrode is a gel-filled, combination electrode designed for general purpose pH measurements. It has a glass body and epoxy body material with a single junction reference. The electrode has a 12 mm diameter pH bulb and is compatible with pH 0-14 measurement range. It has BNC connector type and impedance of less than 600 MOhm. The electrode is maintenance free with no refilling required. It can be used for water, wastewater, food processing and other aqueous solutions. The electrode requires a pH/ORP meter for operation.
Sigma Aldrich Fine Chemicals Biosciences Millicell® ERS 3.0 96-well Electrode
Specialized 96-well probe for Millicell® ERS 3.0 Voltohmmeter.
Pacer Global LLC Utah Medical - Pressure Sensor 1/4 Hose Barb Polysulfone, Standard Cable, Individually Bagged, Single Use, Non-Sterile, 1/EA - BPS-N-025
Pressure Sensor 1/4” Hose Barb Polysulfone, Standard Cable, Individually Bagged, Single Use, Non-sterile