Animal Care and Research
Med Vet International Bone Locking 40mm Screw 3.5mm, J0438LR
A construct using locking plates and screws acts as an internal/external fixator. The construct is stiffer than conventional plates and screws and will require less contouring as it is not essential that the plate contacts the bone. Locking plates and screws are particularly popular in TPLO where significant savings in time (and morbidity) can be made. Also useful in fracture work in situations where contouring and rigidity is a challenge. The head of Jorvet locking screws engages the plate in the standard format using a twin start fine thread. Jorvet screws are an exact fit for standard locking plates but utilize the conventional hex screwdriver rather than a star screwdriver.Locking screws are available in both 2.7 and 3.5 screw diameters. Each size requires its own dedicated drill guide. Jorvet locking plates have ‘stacked’ locking holes which allow more screws per bone fragment compared with dual hole type plates.Locking Screws 3.5mm40mm
Med Vet International Cancellous Screw, Fully Threaded, Self-Tapping, 4.0 mm x 26mm L, J0424IS
Cancellous Screw, Fully Threaded, Self-Tapping, 4.0 mm, 26mm L
Braintree Scientific Blunt Tip Needle non-sterile,22ga - 1"""" w/standard hub 100/p
Stainless steel, blunt tip, hypodermic needle with standard luer hub. For use as an interface to connect a hypodermic syringe directly to catheter port for intravascular substance administration, blood sampling and catheter flushing. **Sold for research purposes only and not for human use**
Med Vet International 3.5mm x 22mm Titanium Cortical Self Tapping Screws, J1074DT, 6-Pack
Many fractures in feline and small canine patients are too small for the 2.0mm DCP and the 2.7mm CDP is too large.The difference between these plates is enormous compared to the difference between 2.7 and 3.5 CDPs. The AMI (resistance to bending) of the 2.7 CDP is 20 times stiffer than the 2.0 DCP. The AMI of the 2.4 DCP is 10 times that of the 2.0 DCP.The solution is a 2.4 series of plates and screws. The plates in both size and strength are midway between 2.0 and 2.7 DCPs. The range and specifications are shown below. The standard 1.5mm hex screwdriver (used for 1.5 and 2.0 screws) is required. The pilot drill is 1.8mm and dedicated instrumentation such as load/neutral guides are also available.
Med Vet International Catheter Chambers, 8g x 22in, J0027G, Each
Stainless steel with slightly curved tip. Finger rest, luer slip adaptor. The preferred instrument for flushing the guttural pouch. Also can be used for uterine flushes. 8g. 22"L.
Med Vet International Steinman Pin 9/64" x 9" w/ Trocar-Screw, J0251F, Each
Highest quality type 316L stainless steel IM pins. Available in the points and diameters listed below. When ordering, please match diameter with point style number. Made in U.S.A.
Braintree Scientific Tygon Catheter Tubing, 50 ft. coil,.03"""" od x 0.01"""" id
Tygon Catheter TubingFlexible and clear; this tubing is ideal for cannulations. It is easily fabricated to various catheter styles and is virtually kink free when securing in a vessel and exiting the animal model. This material is less permeable than silicon rubber tubing and has a very smooth surface which inhibits thrombic events. **Sold for research purposes only and not for human use**
PATTERSON VETERINARY SUPPLY INC Adapter, Common Outlet (delrin), Each
This item has a minimum qty of 8 per supplier requirements.
Adapter, Common Outlet (delrin)
Med Vet International Comfort Winged Elevator Set, J1231S, 4 Elevators, 1 Kit
They have short winged blades with lateral edges which curve upwards further than traditional elevators, improving conformation to the root structure as well as instrument control. The narrow neck enhances visibility of the root and the shorter shart improves handling and control, especially if the operator’s hands are not large. The design invorporates the best parts of an elevator and a periodontal knife. Handles are very comfortable in use. Flattened surface prevents rolling off the tables. Available as a boxed set.Comfort Winged Elevator Set with Stainless Steel Case.
Med Vet International Locking Screw 3.5mm x 44mm Star/Torx, J0438LTT, Each
Locking Screw 3.5mm x 44mm Star/Torx, J0438LTT, Each
Med Vet International Headless Lag Screws - 3.5mm X 25mm, J1334H, Each
Headless Lag Screws - 3.5mm X 25mm, J1334H, Each
Med Vet International 4.5mm Cortical Self-Tapping Screws - 4.5mm Cortical Self-Tapping Screw, J0426KS, Each
4.5MM Cortical Self-Tapping Screw, Single 54mm