Animal Surgical Equipment Accessories
Med Vet International 2.7mm Coritical Self-Tapping Screws, 26mm x 2.0mm, J1072KT
2.7mm screws hex head 2.0mm pilot2.7 self-tapping Cortical 26mm
Med Vet International 3.5mm x 22mm Titanium Cortical Self Tapping Screws, J1074DT, 6-Pack
Many fractures in feline and small canine patients are too small for the 2.0mm DCP and the 2.7mm CDP is too large.The difference between these plates is enormous compared to the difference between 2.7 and 3.5 CDPs. The AMI (resistance to bending) of the 2.7 CDP is 20 times stiffer than the 2.0 DCP. The AMI of the 2.4 DCP is 10 times that of the 2.0 DCP.The solution is a 2.4 series of plates and screws. The plates in both size and strength are midway between 2.0 and 2.7 DCPs. The range and specifications are shown below. The standard 1.5mm hex screwdriver (used for 1.5 and 2.0 screws) is required. The pilot drill is 1.8mm and dedicated instrumentation such as load/neutral guides are also available.
Med Vet International Endotracheal Tube Adapter 4.5mm, J0157C
Portex Endotracheal Adaptor The full range of small animal endotracheal tubes is covered by the twelve adaptors. The adaptors may be sterilized by conventional methods. The compact Swivel Connector may be rotated a full 360 degrees affording maximum positioning and flexibility. For use on all endotracheal tubes.
Med Vet International Femoral Disarticulator, Small, 5.5", J0233
Designed to disarticulate the head of the femur from the acetabulum. The curved blade slides around and between the head of the femur and acetabulum. The sharpened notch at the tip locates and cuts through the round ligament.
Med Vet International Endotracheal Tube Adapter 7.5mm, J0157HH
Portex Endotracheal Adaptor The full range of small animal endotracheal tubes is covered by the twelve adaptors. The adaptors may be sterilized by conventional methods. The compact Swivel Connector may be rotated a full 360 degrees affording maximum positioning and flexibility. For use on all endotracheal tubes.
Med Vet International UV Protected Braun I.V. Set, J1619, Each
UV Protect IV Set. This new generation IV set is for thE application of light-sensitive drugs. It offers the same reliable light-protection as the opaque devices and the additional user benefit of increased safety. The optimized design is transparent and allows fast and easy detection of air and particles in the infusion regime. N Note: The orange color coding is characteristic for this portfolio of UV-protected devices. • PVC- and DEHP-free material • Light-protection up to 520nm wave length • AirStop membrane to avoid particle contamination • PrimeStop cap avoids spillage during priming J1619 UV Protect IV Set. Drip chamber. Roller clamp. Air vent cap. Spike. 72" length (180cm).
Med Vet International JorVet IV Extension Set w/Two Y Sites, J1039A
Two "Y" sites 32" length Two slide clamps Male spin luer lock distal end Female luer lock proximal end
Med Vet International 2.4mm x 34mm Cortical Self-Tapping Screws, J1073M, 6-Pack
Many fractures in feline and small canine patients are too small for the 2.0mm DCP and the 2.7mm CDP is too large.The difference between these plates is enormous compared to the difference between 2.7 and 3.5 CDPs. The AMI (resistance to bending) of the 2.7 CDP is 20 times stiffer than the 2.0 DCP. The AMI of the 2.4 DCP is 10 times that of the 2.0 DCP.The solution is a 2.4 series of plates and screws. The plates in both size and strength are midway between 2.0 and 2.7 DCPs. The range and specifications are shown below. The standard 1.5mm hex screwdriver (used for 1.5 and 2.0 screws) is required. The pilot drill is 1.8mm and dedicated instrumentation such as load/neutral guides are also available.
Med Vet International 9mm x 25mm Stainless Steel TTA Cage, J1072KC
TTA (Tibial Tuberosity Advancement) CagesStainless SteelCage 9 x 25mm
Med Vet International 6mm x 19mm Titanium TTA Cage, J1072JBT
TTA (Tibial Tuberosity Advancement) CagesTitaniumCage 6 x 19mm 2.4mm screw
Med Vet International Trocar-Trocar I. M. Pin, 9/64" x 9", J0250F
Highest quality type 316L stainless steel IM pins. Available in the points and diameters listed below. When ordering, please match diameter with point style number. Made in U.S.A.