Water and Wastewater Testing Supplies
Enterprise Technology Solutions Unger Nifty Nabber Extension A
Nifty Nabber Extension Arm With Claw 18 Black/green
Aqua Solutions Turbidity Std. (Formazin) 4000 NTU (APHA) (1L)
Turbidity Std. (Formazin) 4000 NTU (APHA) (1L)
Aqua Solutions Total Suspended Solids 100 ppm Solution (100ml)
Total Suspended Solids 100 ppm Solution (100ml)
USA BLUE BOOK Sludge Judge II Complete Set
Sludge Judge samplers take accurate measurements of settleable solids in slurries that contain less than 5% solids. All units consist of three 5-ft sections for easy transport. Sludge Judge II features a 1-1/4" butyrate tube. That’s double the size of the original Sludge Judge‚ resulting in double the capacity—6 oz per ft.
TA Instruments Stainless Steel, Composite HB, 20 mm, 2 Degree Cone, NST, Upper Cone for Use with Lower Peltier Plate, Smart Swap 2 Geometry, HR x0 Instruments Only
Waters TA Instruments HR X0, Stainless Steel, Composite HB, 20 mm, 2 Degree Cone, NST is an upper cone for use with the lower Peltier plate. It has Smart Swap 2 geometry and is for use with HR X0 instruments only.
Cole-Parmer Raven Environmental SID-10200-30 Environmental Products Sludge Interface Detector with 30 Foot Cable
The SID-10200 is a portable handheld instrument that accurately determines the sludge blanket solid/liquid interface depths in primary tanks, clarifiers, sedimentation basins and a wide variety of sludge settling tanks. The solid/liquid interface is detected when the probe is lowered into the tank. As solids density increses the meter's LED lightbars begin to illuminate and the alarm horn frequency increases. The meter has a sensor with a 30-ft cable that has 1-ft incremented depth marks. The unit is powered by six AA batteries (included) and measures 8"L x 4.5"W x 3.5"D
Hach Company Imhoff Settling Cone 1 L
Cone-Imhoff Settling-1 L-Polycarbonate-with Screw ClosureFully graduated cones for determination of small amounts of settleable matter in sewage by Imhoff Sedimentation Method Glass cone features reinforced tip for ruggedness while the Polycarbonate cone features a leak-proof removable closure for withdrawal of sediment for analysis Support ring support standand cone holders available and sold separately
Hach Company Sampler, Water Core, "Sludge Judge" Standard Capacity, 3/4" Diameter
Accurate readings can be obtained on suspended solids up to a depth of 4.5 m (15'). Comes in three 1.5 m (5') sections with screw-type fittings. Designed for sampling solids in wastewater and food processing applications. Standard Sludge Judge features 3/4" diameter plastic tubing, while the large capacity Sludge Judge features 1-1/4" diameter plastic tubing for double the capacity.