Water Quality Testing Kits
Hach Company Sulfite 3 Reagent, 100 mL MDB
For sulfite determination by drop-count iodometric titration. 100 mL Marked Dropping Bottle. For use with the Sulfite Test Kit, Model SU-5 (item #148002), the Boiler Treatment Control Test Kit, Model BTC-2 (item #2350400), and the Complete Boiler and Cooling Water Test Kit, Model BC-3 (item # 2350500).
Hach Company Iron Color Disc Test Kit, Model IR-18B
Using the simple color disc method, this kit measures Iron (medium range - 0.2-7 mg/L) and contains reagent for 100 tests.
Hach Company PAN Indicator Solution, 0.1%, 50 mL SCDB
For determination of low level manganese by the PAN method. Hach method 8149. Range: 0.006 to 0.700 mg/L Mn. 50 mL Self-Contained Dropping Bottle.
Hach Company Buffer Reagent for Aluminum in Brine, 100 mL
Buffer Reagent Solution for aluminum in brine testing. 100mL.bottle
Hach Company FerroVer Iron Reagent Accuvac Ampules, pk/25
For determination of total dissolved Iron, as well as complexed iron compounds, by the 1,10 Phenanthroline Method - using FerroVer total iron reagent. Hach Method 8008. USEPA approved for reporting wastewater analysis results after acid digestion. Range: 0.02 - 3.00 mg/L Fe (0-5 mg/L with Pocket Colorimeter II). Pack of 25 ampules.
Hach Company CEL Basic Drinking Water Laboratory - Replacement Reagent Set
Full set of replacement reagents for Basic Drinking Water CEL Laboratories (Part Nos. 2688000 and 251234)
Hach Company THM Reagent 1 Solution, SCDB
For determination of Total Trihalomethanes by the THM Plus™ Method. Hach Method 10132. Part of Reagent Set 2790800. 30 mL Self-Contained Dropping Bottle
Hach Company Calcium/Magnesium Indicator Solution, 100 mL MDB
For determination of calcium and magnesium hardness in water by the Calmagite Colorimetric method. Hach Method 8030. 100 mL Marked Dropping Bottle.
Hach Company pPb-2, Fixer Reagent Solution, 43 mL
For Lead determination by the LeadTrak™ Fast Column Extraction method. Hach method 8317.
Hach Company m-ColiBlue24 Broth, Glass Ampules, pk/20
In 24 hours, Hach's m-ColiBlue24 Broth give you simultaneous results for total coliforms and E. coli. Hach's ready-to-use media eliminates measuring, mixing, and autoclaving steps necessary to prepare dehydrated media. Glass ampules (26084-20), plastic ampules (260845-00), 100mL bottles (26084-42) of m-ColiBlue24 and agar plates (28052-15), afford maximum shelf life and ease of use for pre-measured and prepared media. Enumerate total coliforms and E. coli on one petri dish. Differentiate colonies easily - red and blue indicate total coliforms and blue specifies E. coli. Use m-ColiBlue24 Broth to accurately monitor and evaluate total coliform and E. coli in drinking water; wastewater; bottled water; beverages; surface, ground, and well water; and ultrapure, chemical processing and pharmaceutical processing waters.m-ColiBlue24 should only be used with pads manufactured by the following companies/brands: Pall Corporation, Sartorius, and Millipore EO.
Hach Company System verification Chemkey
Specialized Chemkey used to verify the full system needed to run any measurement on the SL1000 (PPA).
Taylor Chemical TOTAL ALKALINITY INDICATOR
This item has a minimum qty of 2 per supplier requirements.
TOTAL ALKALINITY INDICATOR
Hach Company Hardness (Calcium) Reagent Set, Buret
Reagent set for the determination of Calcium Hardness by EDTA Buret Titration Method (Hach method 8222). EPA Accepted method. Range: 0-5,000 mg/L as CaCO3. Set contains CalVer 2 Calcium Indicator Powder Pillows, Potassium Hydroxide Solution (8 N) and TitraVer (EDTA) Titrant for up to approximately 100 tests.